lkml.org 
[lkml]   [2021]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4] Bluetooth: btusb: re-definition for board_id in struct qca_version
From
Date
Hi Tim,

> The board ID should be split into two bytes.
> The 1st byte is chip ID, and the 2nd byte is platform ID.
> For example, board ID 0x010A, 0x01 is platform ID. 0x0A is chip ID.
> we have several platforms, and platform IDs are continuously added.
> We would not distinguish different chips if we get these mixed up.
> Platform ID:
> 0x00 is for Mobile
> 0x01 is for X86
> 0x02 is for Automotive
> 0x03 is for Consumer electronic
>
> Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
> ---
> drivers/bluetooth/btusb.c | 15 +++++++++++++--
> 1 file changed, 13 insertions(+), 2 deletions(-)

Patch has been applied to bluetooth-next tree.

Regards

Marcel

\
 
 \ /
  Last update: 2021-11-24 16:32    [W:0.097 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site