lkml.org 
[lkml]   [2021]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] USB: serial: option: add Fibocom FM101-GL variants
On Tue, Nov 23, 2021 at 04:26:34PM +0800, Mingjie Zhang wrote:
> Update the USB serial option driver support for the Fibocom
> FM101-GL Cat.6
> LTE modules as there are actually several different variants.
> - VID:PID 2cb7:01a4, FM101-GL for laptop debug M.2 cards(with
> adb interfaces for /Linux/Chrome OS)
> - VID:PID 2cb7:01a2, FM101-GL are laptop M.2 cards (with
> MBIM interfaces for /Linux/Chrome OS)
>
> T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
> D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
> P: Vendor=2cb7 ProdID=01a2 Rev= 5.04
> S: Manufacturer=Fibocom Wireless Inc.
> S: Product=Fibocom FM101-GL Module
> S: SerialNumber=86bffe63
> C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=896mA
> A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
> I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
> I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
> I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
> I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
>
> 0x01a2: mbim, tty, tty, diag, gnss
>
> T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0
> D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
> P: Vendor=2cb7 ProdID=01a4 Rev= 5.04
> S: Manufacturer=Fibocom Wireless Inc.
> S: Product=Fibocom FM101-GL Module
> S: SerialNumber=86bffe63
> C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=896mA
> A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
> I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
> I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
> I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
> I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)
> I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)
>
> 0x01a4: mbim, diag, tty, adb, gnss, gnss
>
> Signed-off-by: Mingjie Zhang <superzmj@fibocom.com>
> ---
> Changes in v2:
> - Add the description of the corresponding interface

Thanks for the v2. You forgot to mention that you also blacklisted the
adb interface here.

> ---
> drivers/usb/serial/option.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> index 29c765cc8495..8ef8d588d007 100644
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -2074,9 +2074,12 @@ static const struct usb_device_id option_ids[] = {
> .driver_info = RSVD(4) | RSVD(5) },
> { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */
> .driver_info = RSVD(6) },
> + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a4, 0xff), /* Fibocom FM101-GL (laptop MBIM) */
> + .driver_info = RSVD(4) },

Are the interface numbers stable so that you can use RSVD() for this
(i.e. instead of adding two separate entries)?

This entry is still not in sort order (VID, PID) however.

> { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) }, /* Fibocom FG150 Diag */
> { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) }, /* Fibocom FG150 AT */
> { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) }, /* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
> + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a2, 0xff) }, /* Fibocom FM101-GL (laptop MBIM) */

But this one is.

> { USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) }, /* LongSung M5710 */
> { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */
> { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */

Please fix in a v3.

Johan

\
 
 \ /
  Last update: 2021-11-23 10:46    [W:0.075 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site