lkml.org 
[lkml]   [2021]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [PATCH RFC v2 0/4] MUX: Add support for reading enable state from DT
    From
    Date
    Hi All,

    On 22/11/21 6:26 pm, Aswath Govindraju wrote:
    > - The following series of patches add support for reading the state of the
    > mux to be set for enabling given device.
    > - As these are RFC patches I have combined them into a single series for
    > better understanding of the reason behind making this change.
    >
    > Changes since v1:
    > - Added support for reading the enable state from DT instead of hardcoding
    > the state to be set to 1.
    > - Made relavent changes in the bindings
    >
    > Link to v1,
    > - https://patchwork.kernel.org/project/linux-phy/list/?series=578863&state=*
    >
    > Aswath Govindraju (4):
    > dt-bindings: mux: Increase the number of arguments in mux-controls
    > dt-bindings: phy: ti,tcan104x-can: Document mux-controls property
    > mux: Add support for reading mux enable state from DT
    > phy: phy-can-transceiver: Add support for setting mux
    >

    Thank you for the comments. I have made changes based on the comments
    received and posted a v3 of this series.

    Regards,
    Aswath

    > .../devicetree/bindings/mux/gpio-mux.yaml | 2 +-
    > .../bindings/mux/mux-controller.yaml | 2 +-
    > .../bindings/phy/ti,tcan104x-can.yaml | 8 ++++++
    > drivers/mux/core.c | 20 ++++++++++++--
    > drivers/phy/phy-can-transceiver.c | 26 +++++++++++++++++++
    > include/linux/mux/consumer.h | 1 +
    > include/linux/mux/driver.h | 1 +
    > 7 files changed, 56 insertions(+), 4 deletions(-)
    >

    \
     
     \ /
      Last update: 2021-11-23 09:15    [W:7.998 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site