lkml.org 
[lkml]   [2021]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: qcom: pm8226: Add PON node
Date
Add PON node with pwrkey and resin as child nodes.
Also adds resin, and additional properties to pwrkey.

Signed-off-by: Jack Matthews <jm5112356@gmail.com>
---
arch/arm/boot/dts/qcom-pm8226.dtsi | 27 +++++++++++++++++++++------
1 file changed, 21 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom-pm8226.dtsi
index 666bc6350c50..63f3026c25bf 100644
--- a/arch/arm/boot/dts/qcom-pm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8226.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: BSD-3-Clause
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/spmi/spmi.h>

&spmi_bus {
@@ -9,12 +10,26 @@ pm8226_0: pm8226@0 {
#address-cells = <1>;
#size-cells = <0>;

- pwrkey@800 {
- compatible = "qcom,pm8941-pwrkey";
- reg = <0x800>;
- interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
+ pon: power-on@800 {
+ compatible = "qcom,pm8916-pon";
+ reg = <0x0800>;
+
+ pm8226_pwrkey: pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
+
+ pm8226_resin: resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+
+ status = "disabled";
+ };
};

smbb: charger@1000 {
--
2.25.1
\
 
 \ /
  Last update: 2021-11-23 00:53    [W:0.040 / U:0.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site