lkml.org 
[lkml]   [2021]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] Revert "e1000e: Add handshake with the CSME to support S0ix"
Date
This reverts commit 3e55d231716ea361b1520b801c6778c4c48de102.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
drivers/net/ethernet/intel/e1000e/ich8lan.h | 2 -
drivers/net/ethernet/intel/e1000e/netdev.c | 328 +++++++++-----------
2 files changed, 154 insertions(+), 176 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h
index 1dfa1d28dae64..8f2a8f4ce0ee4 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.h
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h
@@ -47,8 +47,6 @@
#define E1000_SHRAH_PCH_LPT(_i) (0x0540C + ((_i) * 8))

#define E1000_H2ME 0x05B50 /* Host to ME */
-#define E1000_H2ME_START_DPG 0x00000001 /* indicate the ME of DPG */
-#define E1000_H2ME_EXIT_DPG 0x00000002 /* indicate the ME exit DPG */
#define E1000_H2ME_ULP 0x00000800 /* ULP Indication Bit */
#define E1000_H2ME_ENFORCE_SETTINGS 0x00001000 /* Enforce Settings */

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 242314809e59c..52c91c52b971b 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6345,105 +6345,43 @@ static void e1000e_s0ix_entry_flow(struct e1000_adapter *adapter)
u32 mac_data;
u16 phy_data;

- if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) {
- /* Request ME configure the device for S0ix */
- mac_data = er32(H2ME);
- mac_data |= E1000_H2ME_START_DPG;
- mac_data &= ~E1000_H2ME_EXIT_DPG;
- ew32(H2ME, mac_data);
- } else {
- /* Request driver configure the device to S0ix */
- /* Disable the periodic inband message,
- * don't request PCIe clock in K1 page770_17[10:9] = 10b
- */
- e1e_rphy(hw, HV_PM_CTRL, &phy_data);
- phy_data &= ~HV_PM_CTRL_K1_CLK_REQ;
- phy_data |= BIT(10);
- e1e_wphy(hw, HV_PM_CTRL, phy_data);
-
- /* Make sure we don't exit K1 every time a new packet arrives
- * 772_29[5] = 1 CS_Mode_Stay_In_K1
- */
- e1e_rphy(hw, I217_CGFREG, &phy_data);
- phy_data |= BIT(5);
- e1e_wphy(hw, I217_CGFREG, phy_data);
-
- /* Change the MAC/PHY interface to SMBus
- * Force the SMBus in PHY page769_23[0] = 1
- * Force the SMBus in MAC CTRL_EXT[11] = 1
- */
- e1e_rphy(hw, CV_SMB_CTRL, &phy_data);
- phy_data |= CV_SMB_CTRL_FORCE_SMBUS;
- e1e_wphy(hw, CV_SMB_CTRL, phy_data);
- mac_data = er32(CTRL_EXT);
- mac_data |= E1000_CTRL_EXT_FORCE_SMBUS;
- ew32(CTRL_EXT, mac_data);
-
- /* DFT control: PHY bit: page769_20[0] = 1
- * Gate PPW via EXTCNF_CTRL - set 0x0F00[7] = 1
- */
- e1e_rphy(hw, I82579_DFT_CTRL, &phy_data);
- phy_data |= BIT(0);
- e1e_wphy(hw, I82579_DFT_CTRL, phy_data);
-
- mac_data = er32(EXTCNF_CTRL);
- mac_data |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
- ew32(EXTCNF_CTRL, mac_data);
-
- /* Enable the Dynamic Power Gating in the MAC */
- mac_data = er32(FEXTNVM7);
- mac_data |= BIT(22);
- ew32(FEXTNVM7, mac_data);
-
- /* Disable disconnected cable conditioning for Power Gating */
- mac_data = er32(DPGFR);
- mac_data |= BIT(2);
- ew32(DPGFR, mac_data);
-
- /* Don't wake from dynamic Power Gating with clock request */
- mac_data = er32(FEXTNVM12);
- mac_data |= BIT(12);
- ew32(FEXTNVM12, mac_data);
-
- /* Ungate PGCB clock */
- mac_data = er32(FEXTNVM9);
- mac_data &= ~BIT(28);
- ew32(FEXTNVM9, mac_data);
-
- /* Enable K1 off to enable mPHY Power Gating */
- mac_data = er32(FEXTNVM6);
- mac_data |= BIT(31);
- ew32(FEXTNVM6, mac_data);
-
- /* Enable mPHY power gating for any link and speed */
- mac_data = er32(FEXTNVM8);
- mac_data |= BIT(9);
- ew32(FEXTNVM8, mac_data);
-
- /* Enable the Dynamic Clock Gating in the DMA and MAC */
- mac_data = er32(CTRL_EXT);
- mac_data |= E1000_CTRL_EXT_DMA_DYN_CLK_EN;
- ew32(CTRL_EXT, mac_data);
-
- /* No MAC DPG gating SLP_S0 in modern standby
- * Switch the logic of the lanphypc to use PMC counter
- */
- mac_data = er32(FEXTNVM5);
- mac_data |= BIT(7);
- ew32(FEXTNVM5, mac_data);
- }
+ /* Disable the periodic inband message,
+ * don't request PCIe clock in K1 page770_17[10:9] = 10b
+ */
+ e1e_rphy(hw, HV_PM_CTRL, &phy_data);
+ phy_data &= ~HV_PM_CTRL_K1_CLK_REQ;
+ phy_data |= BIT(10);
+ e1e_wphy(hw, HV_PM_CTRL, phy_data);

- /* Disable the time synchronization clock */
- mac_data = er32(FEXTNVM7);
- mac_data |= BIT(31);
- mac_data &= ~BIT(0);
- ew32(FEXTNVM7, mac_data);
+ /* Make sure we don't exit K1 every time a new packet arrives
+ * 772_29[5] = 1 CS_Mode_Stay_In_K1
+ */
+ e1e_rphy(hw, I217_CGFREG, &phy_data);
+ phy_data |= BIT(5);
+ e1e_wphy(hw, I217_CGFREG, phy_data);

- /* Dynamic Power Gating Enable */
+ /* Change the MAC/PHY interface to SMBus
+ * Force the SMBus in PHY page769_23[0] = 1
+ * Force the SMBus in MAC CTRL_EXT[11] = 1
+ */
+ e1e_rphy(hw, CV_SMB_CTRL, &phy_data);
+ phy_data |= CV_SMB_CTRL_FORCE_SMBUS;
+ e1e_wphy(hw, CV_SMB_CTRL, phy_data);
mac_data = er32(CTRL_EXT);
- mac_data |= BIT(3);
+ mac_data |= E1000_CTRL_EXT_FORCE_SMBUS;
ew32(CTRL_EXT, mac_data);

+ /* DFT control: PHY bit: page769_20[0] = 1
+ * Gate PPW via EXTCNF_CTRL - set 0x0F00[7] = 1
+ */
+ e1e_rphy(hw, I82579_DFT_CTRL, &phy_data);
+ phy_data |= BIT(0);
+ e1e_wphy(hw, I82579_DFT_CTRL, phy_data);
+
+ mac_data = er32(EXTCNF_CTRL);
+ mac_data |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
+ ew32(EXTCNF_CTRL, mac_data);
+
/* Check MAC Tx/Rx packet buffer pointers.
* Reset MAC Tx/Rx packet buffer pointers to suppress any
* pending traffic indication that would prevent power gating.
@@ -6478,6 +6416,59 @@ static void e1000e_s0ix_entry_flow(struct e1000_adapter *adapter)
mac_data = er32(RDFPC);
if (mac_data)
ew32(RDFPC, 0);
+
+ /* Enable the Dynamic Power Gating in the MAC */
+ mac_data = er32(FEXTNVM7);
+ mac_data |= BIT(22);
+ ew32(FEXTNVM7, mac_data);
+
+ /* Disable the time synchronization clock */
+ mac_data = er32(FEXTNVM7);
+ mac_data |= BIT(31);
+ mac_data &= ~BIT(0);
+ ew32(FEXTNVM7, mac_data);
+
+ /* Dynamic Power Gating Enable */
+ mac_data = er32(CTRL_EXT);
+ mac_data |= BIT(3);
+ ew32(CTRL_EXT, mac_data);
+
+ /* Disable disconnected cable conditioning for Power Gating */
+ mac_data = er32(DPGFR);
+ mac_data |= BIT(2);
+ ew32(DPGFR, mac_data);
+
+ /* Don't wake from dynamic Power Gating with clock request */
+ mac_data = er32(FEXTNVM12);
+ mac_data |= BIT(12);
+ ew32(FEXTNVM12, mac_data);
+
+ /* Ungate PGCB clock */
+ mac_data = er32(FEXTNVM9);
+ mac_data &= ~BIT(28);
+ ew32(FEXTNVM9, mac_data);
+
+ /* Enable K1 off to enable mPHY Power Gating */
+ mac_data = er32(FEXTNVM6);
+ mac_data |= BIT(31);
+ ew32(FEXTNVM6, mac_data);
+
+ /* Enable mPHY power gating for any link and speed */
+ mac_data = er32(FEXTNVM8);
+ mac_data |= BIT(9);
+ ew32(FEXTNVM8, mac_data);
+
+ /* Enable the Dynamic Clock Gating in the DMA and MAC */
+ mac_data = er32(CTRL_EXT);
+ mac_data |= E1000_CTRL_EXT_DMA_DYN_CLK_EN;
+ ew32(CTRL_EXT, mac_data);
+
+ /* No MAC DPG gating SLP_S0 in modern standby
+ * Switch the logic of the lanphypc to use PMC counter
+ */
+ mac_data = er32(FEXTNVM5);
+ mac_data |= BIT(7);
+ ew32(FEXTNVM5, mac_data);
}

static void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter)
@@ -6486,98 +6477,87 @@ static void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter)
u32 mac_data;
u16 phy_data;

- if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) {
- /* Request ME unconfigure the device from S0ix */
- mac_data = er32(H2ME);
- mac_data &= ~E1000_H2ME_START_DPG;
- mac_data |= E1000_H2ME_EXIT_DPG;
- ew32(H2ME, mac_data);
- } else {
- /* Request driver unconfigure the device from S0ix */
-
- /* Disable the Dynamic Power Gating in the MAC */
- mac_data = er32(FEXTNVM7);
- mac_data &= 0xFFBFFFFF;
- ew32(FEXTNVM7, mac_data);
-
- /* Disable mPHY power gating for any link and speed */
- mac_data = er32(FEXTNVM8);
- mac_data &= ~BIT(9);
- ew32(FEXTNVM8, mac_data);
-
- /* Disable K1 off */
- mac_data = er32(FEXTNVM6);
- mac_data &= ~BIT(31);
- ew32(FEXTNVM6, mac_data);
-
- /* Disable Ungate PGCB clock */
- mac_data = er32(FEXTNVM9);
- mac_data |= BIT(28);
- ew32(FEXTNVM9, mac_data);
-
- /* Cancel not waking from dynamic
- * Power Gating with clock request
- */
- mac_data = er32(FEXTNVM12);
- mac_data &= ~BIT(12);
- ew32(FEXTNVM12, mac_data);
+ /* Disable the Dynamic Power Gating in the MAC */
+ mac_data = er32(FEXTNVM7);
+ mac_data &= 0xFFBFFFFF;
+ ew32(FEXTNVM7, mac_data);

- /* Cancel disable disconnected cable conditioning
- * for Power Gating
- */
- mac_data = er32(DPGFR);
- mac_data &= ~BIT(2);
- ew32(DPGFR, mac_data);
+ /* Enable the time synchronization clock */
+ mac_data = er32(FEXTNVM7);
+ mac_data |= BIT(0);
+ ew32(FEXTNVM7, mac_data);

- /* Disable the Dynamic Clock Gating in the DMA and MAC */
- mac_data = er32(CTRL_EXT);
- mac_data &= 0xFFF7FFFF;
- ew32(CTRL_EXT, mac_data);
+ /* Disable mPHY power gating for any link and speed */
+ mac_data = er32(FEXTNVM8);
+ mac_data &= ~BIT(9);
+ ew32(FEXTNVM8, mac_data);

- /* Revert the lanphypc logic to use the internal Gbe counter
- * and not the PMC counter
- */
- mac_data = er32(FEXTNVM5);
- mac_data &= 0xFFFFFF7F;
- ew32(FEXTNVM5, mac_data);
+ /* Disable K1 off */
+ mac_data = er32(FEXTNVM6);
+ mac_data &= ~BIT(31);
+ ew32(FEXTNVM6, mac_data);

- /* Enable the periodic inband message,
- * Request PCIe clock in K1 page770_17[10:9] =01b
- */
- e1e_rphy(hw, HV_PM_CTRL, &phy_data);
- phy_data &= 0xFBFF;
- phy_data |= HV_PM_CTRL_K1_CLK_REQ;
- e1e_wphy(hw, HV_PM_CTRL, phy_data);
+ /* Disable Ungate PGCB clock */
+ mac_data = er32(FEXTNVM9);
+ mac_data |= BIT(28);
+ ew32(FEXTNVM9, mac_data);

- /* Return back configuration
- * 772_29[5] = 0 CS_Mode_Stay_In_K1
- */
- e1e_rphy(hw, I217_CGFREG, &phy_data);
- phy_data &= 0xFFDF;
- e1e_wphy(hw, I217_CGFREG, phy_data);
+ /* Cancel not waking from dynamic
+ * Power Gating with clock request
+ */
+ mac_data = er32(FEXTNVM12);
+ mac_data &= ~BIT(12);
+ ew32(FEXTNVM12, mac_data);

- /* Change the MAC/PHY interface to Kumeran
- * Unforce the SMBus in PHY page769_23[0] = 0
- * Unforce the SMBus in MAC CTRL_EXT[11] = 0
- */
- e1e_rphy(hw, CV_SMB_CTRL, &phy_data);
- phy_data &= ~CV_SMB_CTRL_FORCE_SMBUS;
- e1e_wphy(hw, CV_SMB_CTRL, phy_data);
- mac_data = er32(CTRL_EXT);
- mac_data &= ~E1000_CTRL_EXT_FORCE_SMBUS;
- ew32(CTRL_EXT, mac_data);
- }
+ /* Cancel disable disconnected cable conditioning
+ * for Power Gating
+ */
+ mac_data = er32(DPGFR);
+ mac_data &= ~BIT(2);
+ ew32(DPGFR, mac_data);

/* Disable Dynamic Power Gating */
mac_data = er32(CTRL_EXT);
mac_data &= 0xFFFFFFF7;
ew32(CTRL_EXT, mac_data);

- /* Enable the time synchronization clock */
- mac_data = er32(FEXTNVM7);
- mac_data &= ~BIT(31);
- mac_data |= BIT(0);
- ew32(FEXTNVM7, mac_data);
+ /* Disable the Dynamic Clock Gating in the DMA and MAC */
+ mac_data = er32(CTRL_EXT);
+ mac_data &= 0xFFF7FFFF;
+ ew32(CTRL_EXT, mac_data);
+
+ /* Revert the lanphypc logic to use the internal Gbe counter
+ * and not the PMC counter
+ */
+ mac_data = er32(FEXTNVM5);
+ mac_data &= 0xFFFFFF7F;
+ ew32(FEXTNVM5, mac_data);
+
+ /* Enable the periodic inband message,
+ * Request PCIe clock in K1 page770_17[10:9] =01b
+ */
+ e1e_rphy(hw, HV_PM_CTRL, &phy_data);
+ phy_data &= 0xFBFF;
+ phy_data |= HV_PM_CTRL_K1_CLK_REQ;
+ e1e_wphy(hw, HV_PM_CTRL, phy_data);
+
+ /* Return back configuration
+ * 772_29[5] = 0 CS_Mode_Stay_In_K1
+ */
+ e1e_rphy(hw, I217_CGFREG, &phy_data);
+ phy_data &= 0xFFDF;
+ e1e_wphy(hw, I217_CGFREG, phy_data);
+
+ /* Change the MAC/PHY interface to Kumeran
+ * Unforce the SMBus in PHY page769_23[0] = 0
+ * Unforce the SMBus in MAC CTRL_EXT[11] = 0
+ */
+ e1e_rphy(hw, CV_SMB_CTRL, &phy_data);
+ phy_data &= ~CV_SMB_CTRL_FORCE_SMBUS;
+ e1e_wphy(hw, CV_SMB_CTRL, phy_data);
+ mac_data = er32(CTRL_EXT);
+ mac_data &= ~E1000_CTRL_EXT_FORCE_SMBUS;
+ ew32(CTRL_EXT, mac_data);
}

static int e1000e_pm_freeze(struct device *dev)
--
2.32.0
\
 
 \ /
  Last update: 2021-11-22 17:21    [W:0.070 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site