lkml.org 
[lkml]   [2021]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/2] dt-bindings:iio:amplifiers: add ad7293 doc
On Mon, 15 Nov 2021 12:23:40 +0200
Antoniu Miclaus <antoniu.miclaus@analog.com> wrote:

> Add device tree bindings for the AD7293 Power Amplifier.
>
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>

Hi Antoniu,

A few trivial things inline that I'd missed before.

Jonathan

> ---
> no changes in v3
> .../bindings/iio/amplifiers/adi,ad7293.yaml | 64 +++++++++++++++++++
> 1 file changed, 64 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/amplifiers/adi,ad7293.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,ad7293.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,ad7293.yaml
> new file mode 100644
> index 000000000000..9f1b2eb78af3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,ad7293.yaml
> @@ -0,0 +1,64 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/amplifiers/adi,ad7293.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: AD7293 12-Bit Power Amplifier Current Controller with ADC,
> + DACs, Temperature and Current Sensors
> +
> +maintainers:
> + - Antoniu Miclaus <antoniu.miclaus@analog.com>
> +
> +description: |
> + Power Amplifier drain current controller containing functionality
> + for general-purpose monitoring and control of current, voltage,
> + and temperature, integrated into a single chip solution with an
> + SPI-compatible interface.
> +
> + https://www.analog.com/en/products/ad7293.html
> +
> +properties:
> + compatible:
> + enum:
> + - adi,ad7293
> +
> + avdd-supply:
> + description:
> + AVDD voltage regulator.

Not sure these descriptions add anything.
avdd-supply: true
is fine.

> +
> + vdrive-supply:
> + description:
> + VDRIVE voltage regulator.
> +
> + reg:
> + maxItems: 1
> +
> + spi-max-frequency:
> + maximum: 1000000
> +
> + reset-gpios: true

Specify how many?
maxItems: 1

> +
> +required:
> + - compatible
> + - reg
> + - avdd-supply
> + - vdrive-supply
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + ad7293@0 {
> + compatible = "adi,ad7293";
> + reg = <0>;
> + spi-max-frequency = <1000000>;
> + avdd-supply = <&avdd>;
> + vdrive-supply = <&vdrive>;
> + reset-gpios = <&gpio 10 0>;
> + };
> + };
> +...

\
 
 \ /
  Last update: 2021-11-21 13:31    [W:0.200 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site