lkml.org 
[lkml]   [2021]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 6/9] watchdog: Kconfig: fix help text indentation
Date
Some entries indent their help text with 1 tab + 1 space or 1 tab only
instead of 1 tab + 2 spaces. Add the missing spaces.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>

---

Changes in v4: none

Changes in v3: none
---
drivers/watchdog/Kconfig | 48 ++++++++++++++++++++--------------------
1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 9d222ba17ec6..a6d97f30325a 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -680,10 +680,10 @@ config MAX77620_WATCHDOG
depends on MFD_MAX77620 || COMPILE_TEST
select WATCHDOG_CORE
help
- This is the driver for the Max77620 watchdog timer.
- Say 'Y' here to enable the watchdog timer support for
- MAX77620 chips. To compile this driver as a module,
- choose M here: the module will be called max77620_wdt.
+ This is the driver for the Max77620 watchdog timer.
+ Say 'Y' here to enable the watchdog timer support for
+ MAX77620 chips. To compile this driver as a module,
+ choose M here: the module will be called max77620_wdt.

config IMX2_WDT
tristate "IMX2+ Watchdog"
@@ -1440,26 +1440,26 @@ config TQMX86_WDT
depends on X86
select WATCHDOG_CORE
help
- This is the driver for the hardware watchdog timer in the TQMX86 IO
- controller found on some of their ComExpress Modules.
+ This is the driver for the hardware watchdog timer in the TQMX86 IO
+ controller found on some of their ComExpress Modules.

- To compile this driver as a module, choose M here; the module
- will be called tqmx86_wdt.
+ To compile this driver as a module, choose M here; the module
+ will be called tqmx86_wdt.

- Most people will say N.
+ Most people will say N.

config VIA_WDT
tristate "VIA Watchdog Timer"
depends on X86 && PCI
select WATCHDOG_CORE
help
- This is the driver for the hardware watchdog timer on VIA
- southbridge chipset CX700, VX800/VX820 or VX855/VX875.
+ This is the driver for the hardware watchdog timer on VIA
+ southbridge chipset CX700, VX800/VX820 or VX855/VX875.

- To compile this driver as a module, choose M here; the module
- will be called via_wdt.
+ To compile this driver as a module, choose M here; the module
+ will be called via_wdt.

- Most people will say N.
+ Most people will say N.

config W83627HF_WDT
tristate "Watchdog timer for W83627HF/W83627DHG and compatibles"
@@ -1745,10 +1745,10 @@ config BCM7038_WDT
depends on HAS_IOMEM
depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
help
- Watchdog driver for the built-in hardware in Broadcom 7038 and
- later SoCs used in set-top boxes. BCM7038 was made public
- during the 2004 CES, and since then, many Broadcom chips use this
- watchdog block, including some cable modem chips.
+ Watchdog driver for the built-in hardware in Broadcom 7038 and
+ later SoCs used in set-top boxes. BCM7038 was made public
+ during the 2004 CES, and since then, many Broadcom chips use this
+ watchdog block, including some cable modem chips.

config IMGPDC_WDT
tristate "Imagination Technologies PDC Watchdog Timer"
@@ -2109,12 +2109,12 @@ config KEEMBAY_WATCHDOG
depends on ARCH_KEEMBAY || (ARM64 && COMPILE_TEST)
select WATCHDOG_CORE
help
- This option enable support for an In-secure watchdog timer driver for
- Intel Keem Bay SoC. This WDT has a 32 bit timer and decrements in every
- count unit. An interrupt will be triggered, when the count crosses
- the threshold configured in the register.
+ This option enable support for an In-secure watchdog timer driver for
+ Intel Keem Bay SoC. This WDT has a 32 bit timer and decrements in every
+ count unit. An interrupt will be triggered, when the count crosses
+ the threshold configured in the register.

- To compile this driver as a module, choose M here: the
- module will be called keembay_wdt.
+ To compile this driver as a module, choose M here: the
+ module will be called keembay_wdt.

endif # WATCHDOG
--
2.25.1
\
 
 \ /
  Last update: 2021-11-20 17:07    [W:0.167 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site