Messages in this thread | | | Date | Tue, 2 Nov 2021 12:02:39 -0600 | From | Mathieu Poirier <> | Subject | Re: [PATCH 10/10] ARM: dts: msm: Add TPDA and TPDM support to DTS for RB5 |
| |
On Thu, Oct 21, 2021 at 03:38:56PM +0800, Tao Zhang wrote: > Add TPDA and TPDM support to DTS for RB5 board. This change is a > sample for validating. After applying this patch, the new TPDM and > TPDA nodes can be observed at the coresight devices path. TPDM and > TPDA hardware can be operated by commands. > > List the commands for validating this series patches as below. > echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink > echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source > echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test > echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test > cat /dev/tmc_etf0 > /data/etf-tpdm0.bin > echo 0 > /sys/bus/coresight/devices/tpdm0/enable_source > echo 0 > /sys/bus/coresight/devices/tmc_etf0/enable_sink > echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink > echo 1 > /sys/bus/coresight/devices/tpdm1/enable_source > echo 1 > /sys/bus/coresight/devices/tpdm1/integration_test > echo 2 > /sys/bus/coresight/devices/tpdm1/integration_test > cat /dev/tmc_etf0 > /data/etf-tpdm1.bin > echo 0 > /sys/bus/coresight/devices/tpdm1/enable_source > echo 0 > /sys/bus/coresight/devices/tmc_etf0/enable_sink > echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink > echo 1 > /sys/bus/coresight/devices/tpdm2/enable_source > echo 1 > /sys/bus/coresight/devices/tpdm2/integration_test > echo 2 > /sys/bus/coresight/devices/tpdm2/integration_test > cat /dev/tmc_etf0 > /data/etf-tpdm2.bin > echo 0 > /sys/bus/coresight/devices/tpdm2/enable_source > echo 0 > /sys/bus/coresight/devices/tmc_etf0/enable_sink > > If the data from TPDMs can be obtained from the ETF, it means > that the TPDMs verification is successful. At the same time, > since TPDM0, TPDM1 and TPDM2 are all connected to the same > funnel "funnel@6c2d000" and output via different output ports,
Where is "funnel@6c2d000" in this patch?
> it also means that the following patches verification is > successful. > coresight: add support to enable more coresight paths > coresight: funnel: add support for multiple output ports > > Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> > --- > arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 439 +++++++++++++++++++++++ > 1 file changed, 439 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts > index 8ac96f8e79d4..bcec8b181e11 100644 > --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts > +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts > @@ -222,6 +222,445 @@ > regulator-max-microvolt = <1800000>; > regulator-always-on; > }; > + > + stm@6002000 { > + compatible = "arm,coresight-stm", "arm,primecell"; > + reg = <0 0x06002000 0 0x1000>, > + <0 0x16280000 0 0x180000>; > + reg-names = "stm-base", "stm-stimulus-base"; > + > + clocks = <&aoss_qmp>; > + clock-names = "apb_pclk"; > + > + out-ports { > + port { > + stm_out: endpoint { > + remote-endpoint = > + <&funnel0_in7>; > + }; > + }; > + }; > + }; > + > + funnel@6041000 { > + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; > + reg = <0 0x06041000 0 0x1000>; > + > + clocks = <&aoss_qmp>; > + clock-names = "apb_pclk"; > + > + out-ports { > + port { > + funnel0_out: endpoint { > + remote-endpoint = > + <&merge_funnel_in0>; > + }; > + }; > + }; > + > + in-ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@7 { > + reg = <7>; > + funnel0_in7: endpoint { > + remote-endpoint = <&stm_out>; > + }; > + }; > + }; > + }; > + > + funnel@6042000 { > + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; > + reg = <0 0x06042000 0 0x1000>; > + > + clocks = <&aoss_qmp>; > + clock-names = "apb_pclk"; > + > + out-ports { > + port { > + funnel2_out: endpoint { > + remote-endpoint = > + <&merge_funnel_in2>; > + }; > + }; > + }; > + > + in-ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@4 { > + reg = <4>; > + funnel2_in5: endpoint { > + remote-endpoint = > + <&apss_merge_funnel_out>; > + }; > + }; > + }; > + }; > + > + funnel@6b04000 { > + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; > + arm,primecell-periphid = <0x000bb908>; > + > + reg = <0 0x6b04000 0 0x1000>; > + reg-names = "funnel-base"; > + > + clocks = <&aoss_qmp>; > + clock-names = "apb_pclk"; > + > + out-ports { > + port { > + merge_funnel_out: endpoint { > + remote-endpoint = > + <&etf_in>; > + }; > + }; > + }; > + > + in-ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@7 { > + reg = <7>; > + swao_funnel_in7: endpoint { > + slave-mode; > + remote-endpoint= > + <&merg_funnel_out>; > + }; > + }; > + }; > + > + }; > + > + funnel@6045000 { > + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; > + reg = <0 0x06045000 0 0x1000>; > + > + clocks = <&aoss_qmp>; > + clock-names = "apb_pclk"; > + > + out-ports { > + port { > + merg_funnel_out: endpoint { > + remote-endpoint = <&swao_funnel_in7>; > + }; > + }; > + }; > + > + in-ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + merge_funnel_in0: endpoint { > + remote-endpoint = > + <&funnel0_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + merge_funnel_in2: endpoint { > + remote-endpoint = > + <&funnel2_out>; > + }; > + }; > + }; > + }; > + > + etf@6b05000 { > + compatible = "arm,coresight-tmc", "arm,primecell"; > + reg = <0 0x06b05000 0 0x1000>; > + > + clocks = <&aoss_qmp>; > + clock-names = "apb_pclk"; > + > + in-ports { > + port { > + etf_in: endpoint { > + remote-endpoint = > + <&merge_funnel_out>; > + }; > + }; > + }; > + }; > + > + etm@7040000 { > + compatible = "arm,coresight-etm4x", "arm,primecell"; > + reg = <0 0x07040000 0 0x1000>; > + > + cpu = <&CPU0>; > + > + clocks = <&aoss_qmp>; > + clock-names = "apb_pclk"; > + arm,coresight-loses-context-with-cpu; > + > + out-ports { > + port { > + etm0_out: endpoint { > + remote-endpoint = > + <&apss_funnel_in0>; > + }; > + }; > + }; > + }; > + > + etm@7140000 { > + compatible = "arm,coresight-etm4x", "arm,primecell"; > + reg = <0 0x07140000 0 0x1000>; > + > + cpu = <&CPU1>; > + > + clocks = <&aoss_qmp>; > + clock-names = "apb_pclk"; > + arm,coresight-loses-context-with-cpu; > + > + out-ports { > + port { > + etm1_out: endpoint { > + remote-endpoint = > + <&apss_funnel_in1>; > + }; > + }; > + }; > + }; > + > + etm@7240000 { > + compatible = "arm,coresight-etm4x", "arm,primecell"; > + reg = <0 0x07240000 0 0x1000>; > + > + cpu = <&CPU2>; > + > + clocks = <&aoss_qmp>; > + clock-names = "apb_pclk"; > + arm,coresight-loses-context-with-cpu; > + > + out-ports { > + port { > + etm2_out: endpoint { > + remote-endpoint = > + <&apss_funnel_in2>; > + }; > + }; > + }; > + }; > + > + etm@7340000 { > + compatible = "arm,coresight-etm4x", "arm,primecell"; > + reg = <0 0x07340000 0 0x1000>; > + > + cpu = <&CPU3>; > + > + clocks = <&aoss_qmp>; > + clock-names = "apb_pclk"; > + arm,coresight-loses-context-with-cpu; > + > + out-ports { > + port { > + etm3_out: endpoint { > + remote-endpoint = > + <&apss_funnel_in3>; > + }; > + }; > + }; > + }; > + > + etm@7440000 { > + compatible = "arm,coresight-etm4x", "arm,primecell"; > + reg = <0 0x07440000 0 0x1000>; > + > + cpu = <&CPU4>; > + > + clocks = <&aoss_qmp>; > + clock-names = "apb_pclk"; > + arm,coresight-loses-context-with-cpu; > + > + out-ports { > + port { > + etm4_out: endpoint { > + remote-endpoint = > + <&apss_funnel_in4>; > + }; > + }; > + }; > + }; > + > + etm@7540000 { > + compatible = "arm,coresight-etm4x", "arm,primecell"; > + reg = <0 0x07540000 0 0x1000>; > + > + cpu = <&CPU5>; > + > + clocks = <&aoss_qmp>; > + clock-names = "apb_pclk"; > + arm,coresight-loses-context-with-cpu; > + > + out-ports { > + port { > + etm5_out: endpoint { > + remote-endpoint = > + <&apss_funnel_in5>; > + }; > + }; > + }; > + }; > + > + etm@7640000 { > + compatible = "arm,coresight-etm4x", "arm,primecell"; > + reg = <0 0x07640000 0 0x1000>; > + > + cpu = <&CPU6>; > + > + clocks = <&aoss_qmp>; > + clock-names = "apb_pclk"; > + arm,coresight-loses-context-with-cpu; > + > + out-ports { > + port { > + etm6_out: endpoint { > + remote-endpoint = > + <&apss_funnel_in6>; > + }; > + }; > + }; > + }; > + > + etm@7740000 { > + compatible = "arm,coresight-etm4x", "arm,primecell"; > + reg = <0 0x07740000 0 0x1000>; > + > + cpu = <&CPU7>; > + > + clocks = <&aoss_qmp>; > + clock-names = "apb_pclk"; > + arm,coresight-loses-context-with-cpu; > + > + out-ports { > + port { > + etm7_out: endpoint { > + remote-endpoint = > + <&apss_funnel_in7>; > + }; > + }; > + }; > + }; > + > + funnel@7800000 { > + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; > + reg = <0 0x07800000 0 0x1000>; > + > + clocks = <&aoss_qmp>; > + clock-names = "apb_pclk"; > + > + out-ports { > + port { > + apss_funnel_out: endpoint { > + remote-endpoint = > + <&apss_merge_funnel_in>; > + }; > + }; > + }; > + > + in-ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + apss_funnel_in0: endpoint { > + remote-endpoint = > + <&etm0_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + apss_funnel_in1: endpoint { > + remote-endpoint = > + <&etm1_out>; > + }; > + }; > + > + port@2 { > + reg = <2>; > + apss_funnel_in2: endpoint { > + remote-endpoint = > + <&etm2_out>; > + }; > + }; > + > + port@3 { > + reg = <3>; > + apss_funnel_in3: endpoint { > + remote-endpoint = > + <&etm3_out>; > + }; > + }; > + > + port@4 { > + reg = <4>; > + apss_funnel_in4: endpoint { > + remote-endpoint = > + <&etm4_out>; > + }; > + }; > + > + port@5 { > + reg = <5>; > + apss_funnel_in5: endpoint { > + remote-endpoint = > + <&etm5_out>; > + }; > + }; > + > + port@6 { > + reg = <6>; > + apss_funnel_in6: endpoint { > + remote-endpoint = > + <&etm6_out>; > + }; > + }; > + > + port@7 { > + reg = <7>; > + apss_funnel_in7: endpoint { > + remote-endpoint = > + <&etm7_out>; > + }; > + }; > + }; > + }; > + > + funnel@7810000 { > + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; > + reg = <0 0x07810000 0 0x1000>; > + > + clocks = <&aoss_qmp>; > + clock-names = "apb_pclk"; > + > + out-ports { > + port { > + apss_merge_funnel_out: endpoint { > + remote-endpoint = > + <&funnel2_in5>; > + }; > + }; > + }; > + > + in-ports { > + port { > + apss_merge_funnel_in: endpoint { > + remote-endpoint = > + <&apss_funnel_out>; > + }; > + }; > + }; > + };
Which of the above introduces TPDM and TPDA devices?
More comments to come tomorrow.
Thanks, Mathieu
> }; > > &adsp { > -- > 2.17.1 >
| |