lkml.org 
[lkml]   [2021]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: usb: dwc3-xilinx: Convert USB DWC3 bindings
Date
Convert USB DWC3 bindings to DT schema format using json-schema.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
.../devicetree/bindings/usb/dwc3-xilinx.txt | 56 ----------
.../devicetree/bindings/usb/dwc3-xilinx.yaml | 119 +++++++++++++++++++++
2 files changed, 119 insertions(+), 56 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/usb/dwc3-xilinx.txt
create mode 100644 Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml

diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt
deleted file mode 100644
index 04813a4..00000000
--- a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Xilinx SuperSpeed DWC3 USB SoC controller
-
-Required properties:
-- compatible: May contain "xlnx,zynqmp-dwc3" or "xlnx,versal-dwc3"
-- reg: Base address and length of the register control block
-- clocks: A list of phandles for the clocks listed in clock-names
-- clock-names: Should contain the following:
- "bus_clk" Master/Core clock, have to be >= 125 MHz for SS
- operation and >= 60MHz for HS operation
-
- "ref_clk" Clock source to core during PHY power down
-- resets: A list of phandles for resets listed in reset-names
-- reset-names:
- "usb_crst" USB core reset
- "usb_hibrst" USB hibernation reset
- "usb_apbrst" USB APB reset
-
-Required child node:
-A child node must exist to represent the core DWC3 IP block. The name of
-the node is not important. The content of the node is defined in dwc3.txt.
-
-Optional properties for snps,dwc3:
-- dma-coherent: Enable this flag if CCI is enabled in design. Adding this
- flag configures Global SoC bus Configuration Register and
- Xilinx USB 3.0 IP - USB coherency register to enable CCI.
-- interrupt-names: Should contain the following:
- "dwc_usb3" USB gadget mode interrupts
- "otg" USB OTG mode interrupts
- "hiber" USB hibernation interrupts
-
-Example device node:
-
- usb@0 {
- #address-cells = <0x2>;
- #size-cells = <0x1>;
- compatible = "xlnx,zynqmp-dwc3";
- reg = <0x0 0xff9d0000 0x0 0x100>;
- clock-names = "bus_clk", "ref_clk";
- clocks = <&clk125>, <&clk125>;
- resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
- <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
- <&zynqmp_reset ZYNQMP_RESET_USB1_APB>;
- reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
- ranges;
-
- dwc3@fe200000 {
- compatible = "snps,dwc3";
- reg = <0x0 0xfe200000 0x40000>;
- interrupt-names = "dwc_usb3", "otg", "hiber";
- interrupts = <0 65 4>, <0 69 4>, <0 75 4>;
- phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
- phy-names = "usb3-phy";
- dr_mode = "host";
- dma-coherent;
- };
- };
diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
new file mode 100644
index 00000000..193c69a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/dwc3-xilinx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx SuperSpeed DWC3 USB SoC controller
+
+maintainers:
+ - Manish Narani <manish.narani@xilinx.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - xlnx,zynqmp-dwc3
+ - xlnx,versal-dwc3
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ enum: [ 1, 2 ]
+
+ "#size-cells":
+ enum: [ 1, 2 ]
+
+ ranges: true
+
+ power-domains:
+ description: specifies a phandle to PM domain provider node
+ maxItems: 1
+
+ clocks:
+ description:
+ A list of phandle and clock-specifier pairs for the clocks
+ listed in clock-names.
+ items:
+ - description: Master/Core clock, has to be >= 125 MHz
+ for SS operation and >= 60MHz for HS operation.
+ - description: Clock source to core during PHY power down.
+
+ clock-names:
+ items:
+ - const: bus_clk
+ - const: ref_clk
+
+ resets:
+ description:
+ A list of phandles for resets listed in reset-names.
+
+ items:
+ - description: USB core reset
+ - description: USB hibernation reset
+ - description: USB APB reset
+
+ reset-names:
+ items:
+ - const: usb_crst
+ - const: usb_hibrst
+ - const: usb_apbrst
+
+# Required child node:
+
+patternProperties:
+ "^usb@[0-9a-f]+$":
+ $ref: snps,dwc3.yaml#
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+ - power-domains
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
+ #include <dt-bindings/power/xlnx-zynqmp-power.h>
+ #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+ #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+ #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+ #include <dt-bindings/phy/phy.h>
+ axi {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ usb@0 {
+ #address-cells = <0x2>;
+ #size-cells = <0x2>;
+ compatible = "xlnx,zynqmp-dwc3";
+ reg = <0x0 0xff9d0000 0x0 0x100>;
+ clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+ clock-names = "bus_clk", "ref_clk";
+ power-domains = <&zynqmp_firmware PD_USB_0>;
+ resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
+ <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
+ <&zynqmp_reset ZYNQMP_RESET_USB1_APB>;
+ reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
+ ranges;
+
+ usb@fe200000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xfe200000 0x0 0x40000>;
+ interrupt-names = "dwc_usb3";
+ interrupts = <0 65 4>;
+ phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+ phy-names = "usb3-phy";
+ dr_mode = "host";
+ dma-coherent;
+ };
+ };
+ };
--
2.1.1
\
 
 \ /
  Last update: 2021-11-19 14:47    [W:0.072 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site