lkml.org 
[lkml]   [2021]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/4] arm64: dts: qcom: sdm845-db845c: Remove clock-lanes property from &camss node
Date
The clock-lanes property is no longer used as it is not programmable by
the CSIPHY hardware block of Qcom ISPs and should be removed.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 3 ---
1 file changed, 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 13f80a0b6faa..2cf4b932aee2 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1125,7 +1125,6 @@ ports {
port@0 {
reg = <0>;
csiphy0_ep: endpoint {
- clock-lanes = <7>;
data-lanes = <0 1 2 3>;
remote-endpoint = <&ov8856_ep>;
};
@@ -1166,7 +1165,6 @@ camera@10 {

port {
ov8856_ep: endpoint {
- clock-lanes = <1>;
link-frequencies = /bits/ 64
<360000000 180000000>;
data-lanes = <1 2 3 4>;
@@ -1211,7 +1209,6 @@ camera@60 {

port {
ov7251_ep: endpoint {
- clock-lanes = <1>;
data-lanes = <0 1>;
// remote-endpoint = <&csiphy3_ep>;
};
--
2.32.0
\
 
 \ /
  Last update: 2021-11-18 13:50    [W:0.266 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site