lkml.org 
[lkml]   [2021]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: Re: [RFC] KVM: x86: SVM: don't expose PV_SEND_IPI feature with AVIC
On Tue, Nov 16, 2021 at 10:56:25AM +0800, zhenwei pi wrote:
>
>
>On 11/16/21 10:48 AM, Wanpeng Li wrote:
>> On Mon, 8 Nov 2021 at 22:09, Maxim Levitsky <mlevitsk@redhat.com> wrote:
>> >
>> > On Mon, 2021-11-08 at 11:30 +0100, Paolo Bonzini wrote:
>> > > On 11/8/21 10:59, Kele Huang wrote:
>> > > > Currently, AVIC is disabled if x2apic feature is exposed to guest
>> > > > or in-kernel PIT is in re-injection mode.
>> > > >
>> > > > We can enable AVIC with options:
>> > > >
>> > > > Kmod args:
>> > > > modprobe kvm_amd avic=1 nested=0 npt=1
>> > > > QEMU args:
>> > > > ... -cpu host,-x2apic -global kvm-pit.lost_tick_policy=discard ...
>> > > >
>> > > > When LAPIC works in xapic mode, both AVIC and PV_SEND_IPI feature
>> > > > can accelerate IPI operations for guest. However, the relationship
>> > > > between AVIC and PV_SEND_IPI feature is not sorted out.
>> > > >
>> > > > In logical, AVIC accelerates most of frequently IPI operations
>> > > > without VMM intervention, while the re-hooking of apic->send_IPI_xxx
>> > > > from PV_SEND_IPI feature masks out it. People can get confused
>> > > > if AVIC is enabled while getting lots of hypercall kvm_exits
>> > > > from IPI.
>> > > >
>> > > > In performance, benchmark tool
>> > > > https://lore.kernel.org/kvm/20171219085010.4081-1-ynorov@caviumnetworks.com/
>> > > > shows below results:
>> > > >
>> > > > Test env:
>> > > > CPU: AMD EPYC 7742 64-Core Processor
>> > > > 2 vCPUs pinned 1:1
>> > > > idle=poll
>> > > >
>> > > > Test result (average ns per IPI of lots of running):
>> > > > PV_SEND_IPI : 1860
>> > > > AVIC : 1390
>> > > >
>> > > > Besides, disscussions in https://lkml.org/lkml/2021/10/20/423
>> > > > do have some solid performance test results to this.
>> > > >
>> > > > This patch fixes this by masking out PV_SEND_IPI feature when
>> > > > AVIC is enabled in setting up of guest vCPUs' CPUID.
>> > > >
>> > > > Signed-off-by: Kele Huang <huangkele@bytedance.com>
>> > >
>> > > AVIC can change across migration. I think we should instead use a new
>> > > KVM_HINTS_* bit (KVM_HINTS_ACCELERATED_LAPIC or something like that).
>> > > The KVM_HINTS_* bits are intended to be changeable across migration,
>> > > even though we don't have for now anything equivalent to the Hyper-V
>> > > reenlightenment interrupt.
>> >
>> > Note that the same issue exists with HyperV. It also has PV APIC,
>> > which is harmful when AVIC is enabled (that is guest uses it instead
>> > of using AVIC, negating AVIC benefits).
>> >
>> > Also note that Intel recently posted IPI virtualizaion, which
>> > will make this issue relevant to APICv too soon.
>>
>> The recently posted Intel IPI virtualization will accelerate unicast
>> ipi but not broadcast ipis, AMD AVIC accelerates unicast ipi well but
>> accelerates broadcast ipis worse than pv ipis. Could we just handle
>> unicast ipi here?
>>
>> Wanpeng
>>
>Depend on the number of target vCPUs, broadcast IPIs gets unstable
>performance on AVIC, and usually worse than PV Send IPI.
>So agree with Wanpeng's point, is it possible to separate single IPI and
>broadcast IPI on a hardware acceleration platform?

Actually, this is how kernel works in x2apic mode: use PV interface
(hypercall) to send multi-cast IPIs and write ICR MSR directly to send
unicast IPIs.

But if guest works in xapic mode, both unicast and multi-cast are issued
via PV interface. It is a side-effect introduced by commit aaffcfd1e82d.

how about just correcting the logic for xapic:

From 13447b221252b64cd85ed1329f7d917afa54efc8 Mon Sep 17 00:00:00 2001
From: Jiaqing Zhao <jiaqing.zhao@intel.com>
Date: Fri, 9 Apr 2021 13:53:39 +0800
Subject: [PATCH 1/2] x86/apic/flat: Add specific send IPI logic

Currently, apic_flat.send_IPI() uses default_send_IPI_single(), which
is a wrapper of apic->send_IPI_mask(). Since commit aaffcfd1e82d
("KVM: X86: Implement PV IPIs in linux guest"), KVM PV IPI driver will
override apic->send_IPI_mask(), and may cause unwated side effects.

This patch removes such side effects by creating a specific send_IPI
method.

Signed-off-by: Jiaqing Zhao <jiaqing.zhao@intel.com>
---
arch/x86/kernel/apic/apic_flat_64.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index 8f72b4351c9f..3196bf220230 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -64,6 +64,13 @@ static void flat_send_IPI_mask(const struct cpumask *cpumask, int vector)
_flat_send_IPI_mask(mask, vector);
}

+static void flat_send_IPI_single(int cpu, int vector)
+{
+ unsigned long mask = cpumask_bits(cpumask_of(cpu))[0];
+
+ _flat_send_IPI_mask(mask, vector);
+}
+
static void
flat_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector)
{
@@ -132,7 +139,7 @@ static struct apic apic_flat __ro_after_init = {

.calc_dest_apicid = apic_flat_calc_apicid,

- .send_IPI = default_send_IPI_single,
+ .send_IPI = flat_send_IPI_single,
.send_IPI_mask = flat_send_IPI_mask,
.send_IPI_mask_allbutself = flat_send_IPI_mask_allbutself,
.send_IPI_allbutself = default_send_IPI_allbutself,
--
2.27.0

\
 
 \ /
  Last update: 2021-11-16 09:56    [W:0.045 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site