lkml.org 
[lkml]   [2021]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 03/21] usb: ehci: handshake CMD_RUN instead of STS_HALT
Date
From: Neal Liu <neal_liu@aspeedtech.com>

commit 7f2d73788d9067fd4f677ac5f60ffd25945af7af upstream.

For Aspeed, HCHalted status depends on not only Run/Stop but also
ASS/PSS status.
Handshake CMD_RUN on startup instead.

Tested-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Tao Ren <rentao.bupt@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Link: https://lore.kernel.org/r/20210910073619.26095-1-neal_liu@aspeedtech.com
Cc: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/ehci-hcd.c | 11 ++++++++++-
drivers/usb/host/ehci-platform.c | 6 ++++++
drivers/usb/host/ehci.h | 1 +
3 files changed, 17 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -634,7 +634,16 @@ static int ehci_run (struct usb_hcd *hcd
/* Wait until HC become operational */
ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
msleep(5);
- rc = ehci_handshake(ehci, &ehci->regs->status, STS_HALT, 0, 100 * 1000);
+
+ /* For Aspeed, STS_HALT also depends on ASS/PSS status.
+ * Check CMD_RUN instead.
+ */
+ if (ehci->is_aspeed)
+ rc = ehci_handshake(ehci, &ehci->regs->command, CMD_RUN,
+ 1, 100 * 1000);
+ else
+ rc = ehci_handshake(ehci, &ehci->regs->status, STS_HALT,
+ 0, 100 * 1000);

up_write(&ehci_cf_port_reset_rwsem);

--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -294,6 +294,12 @@ static int ehci_platform_probe(struct pl
"has-transaction-translator"))
hcd->has_tt = 1;

+ if (of_device_is_compatible(dev->dev.of_node,
+ "aspeed,ast2500-ehci") ||
+ of_device_is_compatible(dev->dev.of_node,
+ "aspeed,ast2600-ehci"))
+ ehci->is_aspeed = 1;
+
if (soc_device_match(quirk_poll_match))
priv->quirk_poll = true;

--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -218,6 +218,7 @@ struct ehci_hcd { /* one per controlle
unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */
unsigned need_oc_pp_cycle:1; /* MPC834X port power */
unsigned imx28_write_fix:1; /* For Freescale i.MX28 */
+ unsigned is_aspeed:1;

/* required for usb32 quirk */
#define OHCI_CTRL_HCFS (3 << 6)

\
 
 \ /
  Last update: 2021-11-10 19:53    [W:0.191 / U:1.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site