lkml.org 
[lkml]   [2021]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 3/4] drivers: iio: chemical: Add support for Sensirion SCD4x CO2 sensor
Date
This is a driver for the SCD4x CO2 sensor from Sensirion. The sensor is
able to measure CO2 concentration, temperature and relative humdity.
The sensor uses a photoacoustic principle for measuring CO2 concentration.
An I2C interface is supported by this driver in order to communicate with
the sensor.

Signed-off-by: Roan van Dijk <roan@protonic.nl>
---
drivers/iio/chemical/Kconfig | 13 +
drivers/iio/chemical/Makefile | 1 +
drivers/iio/chemical/scd4x.c | 689 ++++++++++++++++++++++++++++++++++
3 files changed, 703 insertions(+)
create mode 100644 drivers/iio/chemical/scd4x.c

diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig
index c03667e62732..f4d2fcb1b9ac 100644
--- a/drivers/iio/chemical/Kconfig
+++ b/drivers/iio/chemical/Kconfig
@@ -118,6 +118,19 @@ config SCD30_SERIAL
To compile this driver as a module, choose M here: the module will
be called scd30_serial.

+config SCD4X
+ tristate "SCD4X carbon dioxide sensor driver"
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ depends on I2C
+ select CRC8
+ help
+ Say Y here to build support for the Sensirion SCD4X sensor with cabon
+ dioxide, relative humidity and temperature sensing capabilities
+
+ To compile this driver as a module, choose M here: the module will
+ be called scd4x.
+
config SENSIRION_SGP30
tristate "Sensirion SGPxx gas sensors"
depends on I2C
diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile
index d07af581f234..81b29d9eb6a2 100644
--- a/drivers/iio/chemical/Makefile
+++ b/drivers/iio/chemical/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_PMS7003) += pms7003.o
obj-$(CONFIG_SCD30_CORE) += scd30_core.o
obj-$(CONFIG_SCD30_I2C) += scd30_i2c.o
obj-$(CONFIG_SCD30_SERIAL) += scd30_serial.o
+obj-$(CONFIG_SCD4X) += scd4x.o
obj-$(CONFIG_SENSIRION_SGP30) += sgp30.o
obj-$(CONFIG_SENSIRION_SGP40) += sgp40.o
obj-$(CONFIG_SPS30) += sps30.o
diff --git a/drivers/iio/chemical/scd4x.c b/drivers/iio/chemical/scd4x.c
new file mode 100644
index 000000000000..09b34201c42b
--- /dev/null
+++ b/drivers/iio/chemical/scd4x.c
@@ -0,0 +1,689 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Sensirion SCD4X carbon dioxide sensor i2c driver
+ *
+ * Copyright (C) 2021 Protonic Holland
+ * Author: Roan van Dijk <roan@protonic.nl>
+ *
+ * I2C slave address: 0x62
+ *
+ * Datasheets:
+ * https://www.sensirion.com/file/datasheet_scd4x
+ */
+
+#include <asm/unaligned.h>
+#include <linux/crc8.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/types.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+
+#define SCD4X_CRC8_POLYNOMIAL 0x31
+#define SCD4X_TIMEOUT_ERR 1000
+#define SCD4X_READ_BUF_SIZE 9
+#define SCD4X_COMMAND_BUF_SIZE 2
+#define SCD4X_WRITE_BUF_SIZE 5
+#define SCD4X_FRC_MIN_PPM 0
+#define SCD4X_FRC_MAX_PPM 2000
+#define SCD4X_READY_MASK 0x01
+
+/*Commands SCD4X*/
+enum scd4x_cmd {
+ CMD_START_MEAS = 0x21b1,
+ CMD_READ_MEAS = 0xec05,
+ CMD_STOP_MEAS = 0x3f86,
+ CMD_SET_TEMP_OFFSET = 0x241d,
+ CMD_GET_TEMP_OFFSET = 0x2318,
+ CMD_FRC = 0x362f,
+ CMD_SET_ASC = 0x2416,
+ CMD_GET_ASC = 0x2313,
+ CMD_GET_DATA_READY = 0xe4b8,
+};
+
+enum scd4x_channel_idx {
+ SCD4X_CO2,
+ SCD4X_TEMP,
+ SCD4X_HR,
+};
+
+struct scd4x_state {
+ struct i2c_client *client;
+ /* maintain access to device, to prevent concurrent reads/writes */
+ struct mutex lock;
+ struct regulator *vdd;
+};
+
+DECLARE_CRC8_TABLE(scd4x_crc8_table);
+
+static int scd4x_i2c_xfer(struct scd4x_state *state, char *txbuf, int txsize,
+ char *rxbuf, int rxsize)
+{
+ struct i2c_client *client = state->client;
+ int ret;
+
+ ret = i2c_master_send(client, txbuf, txsize);
+
+ if (ret < 0)
+ return ret;
+ if (ret != txsize)
+ return -EIO;
+
+ if (rxsize == 0)
+ return 0;
+
+ ret = i2c_master_recv(client, rxbuf, rxsize);
+ if (ret < 0)
+ return ret;
+ if (ret != rxsize)
+ return -EIO;
+
+ return 0;
+}
+
+static int scd4x_send_command(struct scd4x_state *state, enum scd4x_cmd cmd)
+{
+ char buf[SCD4X_COMMAND_BUF_SIZE];
+ int ret;
+
+ /*
+ * Measurement needs to be stopped before sending commands.
+ * Except stop and start command.
+ */
+ if ((cmd != CMD_STOP_MEAS) && (cmd != CMD_START_MEAS)) {
+
+ ret = scd4x_send_command(state, CMD_STOP_MEAS);
+ if (ret)
+ return ret;
+
+ /* execution time for stopping measurement */
+ msleep_interruptible(500);
+ }
+
+ put_unaligned_be16(cmd, buf);
+ ret = scd4x_i2c_xfer(state, buf, 2, buf, 0);
+ if (ret)
+ return ret;
+
+ if ((cmd != CMD_STOP_MEAS) && (cmd != CMD_START_MEAS)) {
+ ret = scd4x_send_command(state, CMD_START_MEAS);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int scd4x_read(struct scd4x_state *state, enum scd4x_cmd cmd,
+ void *response, int response_sz)
+{
+ struct i2c_client *client = state->client;
+ char buf[SCD4X_READ_BUF_SIZE];
+ char *rsp = response;
+ int i, ret;
+ char crc;
+
+ /*
+ * Measurement needs to be stopped before sending commands.
+ * Except for reading measurement and data ready command.
+ */
+ if ((cmd != CMD_GET_DATA_READY) && (cmd != CMD_READ_MEAS)) {
+ ret = scd4x_send_command(state, CMD_STOP_MEAS);
+ if (ret)
+ return ret;
+
+ /* execution time for stopping measurement */
+ msleep_interruptible(500);
+ }
+
+ /* CRC byte for every 2 bytes of data */
+ response_sz += response_sz / 2;
+
+ put_unaligned_be16(cmd, buf);
+ ret = scd4x_i2c_xfer(state, buf, 2, buf, response_sz);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < response_sz; i += 3) {
+ crc = crc8(scd4x_crc8_table, buf + i, 2, CRC8_INIT_VALUE);
+ if (crc != buf[i + 2]) {
+ dev_err(&client->dev, "CRC error\n");
+ return -EIO;
+ }
+
+ *rsp++ = buf[i];
+ *rsp++ = buf[i + 1];
+ }
+
+ /* start measurement */
+ if ((cmd != CMD_GET_DATA_READY) && (cmd != CMD_READ_MEAS)) {
+ ret = scd4x_send_command(state, CMD_START_MEAS);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int scd4x_write(struct scd4x_state *state, enum scd4x_cmd cmd, uint16_t arg)
+{
+ char buf[SCD4X_WRITE_BUF_SIZE];
+ int ret;
+ char crc;
+
+ put_unaligned_be16(cmd, buf);
+ put_unaligned_be16(arg, buf + 2);
+
+ crc = crc8(scd4x_crc8_table, buf + 2, 2, CRC8_INIT_VALUE);
+ buf[4] = crc;
+
+ /* measurement needs to be stopped before sending commands */
+ ret = scd4x_send_command(state, CMD_STOP_MEAS);
+ if (ret)
+ return ret;
+
+ /* execution time */
+ msleep_interruptible(500);
+
+ ret = scd4x_i2c_xfer(state, buf, SCD4X_WRITE_BUF_SIZE, buf, 0);
+ if (ret)
+ return ret;
+
+ /* start measurement, except for forced calibration command */
+ if (cmd != CMD_FRC) {
+ ret = scd4x_send_command(state, CMD_START_MEAS);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int scd4x_write_and_fetch(struct scd4x_state *state, enum scd4x_cmd cmd,
+ uint16_t arg, void *response, int response_sz)
+{
+ struct i2c_client *client = state->client;
+ char buf[SCD4X_READ_BUF_SIZE];
+ char *rsp = response;
+ int i, ret;
+ char crc;
+
+ ret = scd4x_write(state, CMD_FRC, arg);
+ if (ret)
+ goto err;
+
+ /* execution time */
+ msleep_interruptible(400);
+
+ /* CRC byte for every 2 bytes of data */
+ response_sz += response_sz / 2;
+
+ ret = i2c_master_recv(client, buf, response_sz);
+ if (ret < 0)
+ goto err;
+ if (ret != response_sz) {
+ ret = -EIO;
+ goto err;
+ }
+
+ for (i = 0; i < response_sz; i += 3) {
+ crc = crc8(scd4x_crc8_table, buf + i, 2, CRC8_INIT_VALUE);
+ if (crc != buf[i + 2]) {
+ dev_err(&client->dev, "CRC error\n");
+ ret = -EIO;
+ goto err;
+ }
+
+ *rsp++ = buf[i];
+ *rsp++ = buf[i + 1];
+ }
+
+ return scd4x_send_command(state, CMD_START_MEAS);
+
+err:
+ /*
+ * on error try to start the measurement,
+ * puts sensor back into continuous measurement
+ */
+ scd4x_send_command(state, CMD_START_MEAS);
+
+ return ret;
+}
+
+static int scd4x_read_meas(struct scd4x_state *state, uint16_t *meas)
+{
+ int i, ret;
+ uint16_t buf[3];
+
+ ret = scd4x_read(state, CMD_READ_MEAS, buf, sizeof(buf));
+ if (ret)
+ return ret;
+
+ for (i = 0; i < ARRAY_SIZE(buf); i++)
+ meas[i] = be16_to_cpu(buf[i]);
+
+ return 0;
+}
+
+static int scd4x_wait_meas_poll(struct scd4x_state *state)
+{
+ struct i2c_client *client = state->client;
+ int tries = 6;
+ int ret;
+
+ do {
+ uint16_t val;
+
+ ret = scd4x_read(state, CMD_GET_DATA_READY, &val, sizeof(val));
+ if (ret)
+ return -EIO;
+ val = be16_to_cpu(val);
+
+ /* new measurement available */
+ if (val & 0x7FF)
+ return 0;
+
+ msleep_interruptible(1000);
+ } while (--tries);
+
+ /* try to start sensor on timeout */
+ ret = scd4x_send_command(state, CMD_START_MEAS);
+ if (ret)
+ dev_err(&client->dev, "failed to start measurement: %d\n", ret);
+
+ return -ETIMEDOUT;
+}
+
+static int scd4x_read_poll(struct scd4x_state *state, uint16_t *buf)
+{
+ int ret;
+
+ ret = scd4x_wait_meas_poll(state);
+ if (ret)
+ return ret;
+
+ return scd4x_read_meas(state, buf);
+}
+
+static int scd4x_read_channel(struct scd4x_state *state, int chan)
+{
+ int ret;
+ uint16_t buf[3];
+
+ ret = scd4x_read_poll(state, buf);
+ if (ret)
+ return ret;
+
+ return buf[chan];
+}
+
+static int scd4x_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ struct scd4x_state *state = iio_priv(indio_dev);
+ int ret;
+ uint16_t tmp;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ mutex_lock(&state->lock);
+ ret = scd4x_read_channel(state, chan->address);
+ mutex_unlock(&state->lock);
+
+ iio_device_release_direct_mode(indio_dev);
+ if (ret < 0)
+ return ret;
+
+ *val = ret;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ if (chan->type == IIO_TEMP) {
+ *val = 175000;
+ *val2 = 65536;
+ return IIO_VAL_FRACTIONAL;
+ } else if (chan->type == IIO_HUMIDITYRELATIVE) {
+ *val = 100000;
+ *val2 = 65536;
+ return IIO_VAL_FRACTIONAL;
+ }
+ return -EINVAL;
+ case IIO_CHAN_INFO_OFFSET:
+ *val = -16852;
+ *val2 = 114286;
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_CALIBBIAS:
+ mutex_lock(&state->lock);
+ ret = scd4x_read(state, CMD_GET_TEMP_OFFSET, &tmp, sizeof(tmp));
+ mutex_unlock(&state->lock);
+ if (ret)
+ return ret;
+
+ *val = be16_to_cpu(tmp);
+
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int scd4x_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct scd4x_state *state = iio_priv(indio_dev);
+ int ret = 0;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_CALIBBIAS:
+ mutex_lock(&state->lock);
+ ret = scd4x_write(state, CMD_SET_TEMP_OFFSET, val);
+ mutex_unlock(&state->lock);
+
+ return ret;
+ default:
+ return -EINVAL;
+ }
+}
+
+static ssize_t calibration_auto_enable_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct scd4x_state *state = iio_priv(indio_dev);
+ int ret;
+ uint16_t val;
+
+ mutex_lock(&state->lock);
+ ret = scd4x_read(state, CMD_GET_ASC, &val, sizeof(val));
+ mutex_unlock(&state->lock);
+ if (ret) {
+ dev_err(dev, "failed to read automatic calibration");
+ return ret;
+ }
+
+ val = (be16_to_cpu(val) & SCD4X_READY_MASK) ? 1 : 0;
+
+ return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t calibration_auto_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct scd4x_state *state = iio_priv(indio_dev);
+ bool val;
+ int ret;
+ uint16_t value;
+
+ ret = kstrtobool(buf, &val);
+ if (ret)
+ return ret;
+
+ value = val;
+
+ mutex_lock(&state->lock);
+ ret = scd4x_write(state, CMD_SET_ASC, value);
+ mutex_unlock(&state->lock);
+ if (ret)
+ dev_err(dev, "failed to set automatic calibration");
+
+ return ret ?: len;
+}
+
+static ssize_t calibration_forced_value_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct scd4x_state *state = iio_priv(indio_dev);
+ uint16_t val, arg;
+ int ret;
+
+ ret = kstrtou16(buf, 0, &arg);
+ if (ret)
+ return ret;
+
+ if (arg < SCD4X_FRC_MIN_PPM || arg > SCD4X_FRC_MAX_PPM)
+ return -EINVAL;
+
+ mutex_lock(&state->lock);
+ ret = scd4x_write_and_fetch(state, CMD_FRC, arg, &val, sizeof(val));
+ mutex_unlock(&state->lock);
+
+ if (val == 0xff) {
+ dev_err(dev, "forced calibration has failed");
+ return -EINVAL;
+ }
+
+ return ret ?: len;
+}
+
+static IIO_DEVICE_ATTR_RW(calibration_auto_enable, 0);
+static IIO_DEVICE_ATTR_WO(calibration_forced_value, 0);
+
+static IIO_CONST_ATTR(calibration_forced_value_available,
+ __stringify([SCD4X_FRC_MIN_PPM 1 SCD4X_FRC_MAX_PPM]));
+
+static struct attribute *scd4x_attrs[] = {
+ &iio_dev_attr_calibration_auto_enable.dev_attr.attr,
+ &iio_dev_attr_calibration_forced_value.dev_attr.attr,
+ &iio_const_attr_calibration_forced_value_available.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group scd4x_attr_group = {
+ .attrs = scd4x_attrs,
+};
+
+static const struct iio_info scd4x_info = {
+ .attrs = &scd4x_attr_group,
+ .read_raw = scd4x_read_raw,
+ .write_raw = scd4x_write_raw,
+};
+
+static const struct iio_chan_spec scd4x_channels[] = {
+ {
+ .type = IIO_CONCENTRATION,
+ .channel2 = IIO_MOD_CO2,
+ .modified = 1,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .address = SCD4X_CO2,
+ .scan_index = SCD4X_CO2,
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 16,
+ .storagebits = 16,
+ .endianness = IIO_BE,
+ },
+ },
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_OFFSET) |
+ BIT(IIO_CHAN_INFO_CALIBBIAS),
+ .address = SCD4X_TEMP,
+ .scan_index = SCD4X_TEMP,
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 16,
+ .storagebits = 16,
+ .endianness = IIO_BE,
+ },
+ },
+ {
+ .type = IIO_HUMIDITYRELATIVE,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ .address = SCD4X_HR,
+ .scan_index = SCD4X_HR,
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 16,
+ .storagebits = 16,
+ .endianness = IIO_BE,
+ },
+ },
+};
+
+static int __maybe_unused scd4x_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct scd4x_state *state = iio_priv(indio_dev);
+ int ret;
+
+ ret = scd4x_send_command(state, CMD_STOP_MEAS);
+ if (ret)
+ return ret;
+
+ return regulator_disable(state->vdd);
+}
+
+static int __maybe_unused scd4x_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct scd4x_state *state = iio_priv(indio_dev);
+ int ret;
+
+ ret = regulator_enable(state->vdd);
+ if (ret)
+ return ret;
+
+ return scd4x_send_command(state, CMD_START_MEAS);
+}
+
+static __maybe_unused SIMPLE_DEV_PM_OPS(scd4x_pm_ops, scd4x_suspend, scd4x_resume);
+
+static void scd4x_stop_meas(void *state)
+{
+ scd4x_send_command(state, CMD_STOP_MEAS);
+}
+
+static void scd4x_disable_regulator(void *data)
+{
+ struct scd4x_state *state = data;
+
+ regulator_disable(state->vdd);
+}
+
+static irqreturn_t scd4x_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct scd4x_state *state = iio_priv(indio_dev);
+ struct {
+ uint16_t data[3];
+ int64_t ts __aligned(8);
+ } scan;
+ int ret;
+
+ memset(&scan, 0, sizeof(scan));
+ mutex_lock(&state->lock);
+ ret = scd4x_read_poll(state, scan.data);
+ mutex_unlock(&state->lock);
+ if (ret)
+ goto out;
+
+ iio_push_to_buffers_with_timestamp(indio_dev, &scan, iio_get_time_ns(indio_dev));
+out:
+ iio_trigger_notify_done(indio_dev->trig);
+ return IRQ_HANDLED;
+}
+
+static int scd4x_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ static const unsigned long scd4x_scan_masks[] = { 0x07, 0x00 };
+ struct device *dev = &client->dev;
+ struct iio_dev *indio_dev;
+ struct scd4x_state *state;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*state));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ state = iio_priv(indio_dev);
+ mutex_init(&state->lock);
+ state->client = client;
+ crc8_populate_msb(scd4x_crc8_table, SCD4X_CRC8_POLYNOMIAL);
+
+ indio_dev->info = &scd4x_info;
+ indio_dev->name = client->name;
+ indio_dev->channels = scd4x_channels;
+ indio_dev->num_channels = ARRAY_SIZE(scd4x_channels);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->available_scan_masks = scd4x_scan_masks;
+
+ state->vdd = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(state->vdd))
+ return dev_err_probe(dev, PTR_ERR(state->vdd), "failed to get regulator\n");
+
+ ret = regulator_enable(state->vdd);
+ if (ret)
+ return ret;
+
+ ret = devm_add_action_or_reset(dev, scd4x_disable_regulator, state);
+ if (ret)
+ return ret;
+
+ ret = scd4x_send_command(state, CMD_STOP_MEAS);
+ if (ret) {
+ dev_err(dev, "failed to stop measurement: %d\n", ret);
+ return ret;
+ }
+
+ /* execution time */
+ msleep_interruptible(500);
+
+ ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, scd4x_trigger_handler, NULL);
+ if (ret)
+ return ret;
+
+ ret = scd4x_send_command(state, CMD_START_MEAS);
+ if (ret) {
+ dev_err(dev, "failed to start measurement: %d\n", ret);
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(dev, scd4x_stop_meas, state);
+ if (ret)
+ return ret;
+
+ return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct of_device_id scd4x_dt_ids[] = {
+ { .compatible = "sensirion,scd40" },
+ { .compatible = "sensirion,scd41" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, scd4x_dt_ids);
+
+static struct i2c_driver scd4x_i2c_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .of_match_table = scd4x_dt_ids,
+ .pm = &scd4x_pm_ops
+ },
+ .probe = scd4x_probe,
+};
+module_i2c_driver(scd4x_i2c_driver);
+
+MODULE_AUTHOR("Roan van Dijk <roan@protonic.nl>");
+MODULE_DESCRIPTION("Sensirion SCD4X carbon dioxide sensor core driver");
+MODULE_LICENSE("GPL v2");
--
2.30.2
\
 
 \ /
  Last update: 2021-10-08 12:18    [W:0.088 / U:1.976 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site