lkml.org 
[lkml]   [2021]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 6/6] dt-bindings: hwmon: jedec,jc42: add nxp,se97b
From
Date
On 24/09/2021 13:51, Guenter Roeck wrote:
> On Fri, Sep 24, 2021 at 08:57:44AM +0200, Krzysztof Kozlowski wrote:
>> On 23/09/2021 23:16, Rob Herring wrote:
>>> On Mon, Sep 20, 2021 at 08:21:14PM +0200, Krzysztof Kozlowski wrote:
>>>> Document bindings for NXP SE97B, a DDR memory module temperature sensor
>>>> with integrated SPD and EEPROM via Atmel's AT24 interface.
>>>>
>>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
>>>> ---
>>>> Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml | 9 +++++++++
>>>> 1 file changed, 9 insertions(+)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
>>>> index a7bb4e3a1c46..0e49b3901161 100644
>>>> --- a/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
>>>> +++ b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
>>>> @@ -10,6 +10,14 @@ maintainers:
>>>> - Jean Delvare <jdelvare@suse.com>
>>>> - Guenter Roeck <linux@roeck-us.net>
>>>>
>>>> +select:
>>>> + properties:
>>>> + compatible:
>>>> + const: jedec,jc-42.4-temp
>>>> +
>>>> + required:
>>>> + - compatible
>>>> +
>>>
>>> Is this supposed to be in the last patch? And why is it needed?
>>
>> Yes, this is here on purpose because of nxp,se97b which is sensor with
>> at24-compatible EEPROM.
>>
>> arch/arm/boot/dts/at91-nattis-2-natte-2.dts:
>> 169 temp@18 {
>> 170 compatible = "nxp,se97b", "jedec,jc-42.4-temp";
>>
>> 171 reg = <0x18>;
>> 172 smbus-timeout-disable;
>> 173 };
>> 174
>> 175 eeprom@50 {
>> 176 compatible = "nxp,se97b", "atmel,24c02";
>
> How would that be handled anyway ? Yes, the chip includes both a temperature
> sensor and an eeprom, but this node should most definitely not instantiate as
> temperature sensor.
>

I am not sure if I understand the problem you are mentioning. You have
two nods in DT, two different compatible sets and two difference
devices. One eeprom and other one a temperature sensor.


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2021-10-08 10:03    [W:0.089 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site