lkml.org 
[lkml]   [2021]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [net-next PATCH 06/13] Documentation: devicetree: net: dsa: qca8k: document rgmii_1_8v bindings
On Thu, Oct 07, 2021 at 06:47:10PM +0200, Andrew Lunn wrote:
> > Only some device require this, with these bit at 0, the internal
> > regulator provide 1.5v. It's not really a on/off but a toggle of the
> > different operating voltage. Some device require this and some doesn't.
>
> Can you provide a list of devices which require it?
>
> Andrew

one bcm device the cisco meraki mx65 doesn't have them set.
no qca8327 device have them used.

device with qca,rgmii0-1-8v
netgear r7500v2
Askey RT4230W REV6

device with qca,rgmii56-1-8v
NEC Platforms Aterm WG2600HP3
TP-Link Talon AD7200
Qualcomm Technologies, Inc. IPQ8064/AP-148
AP-161
netgear d7800
dev board DB149
Linksys EA8500 WiFi Router
Linksys EA7500 V1 WiFi Router
ASRock G10
Netgear r7500
TP-Link Archer VR2600v
NEC Aterm WG2600HP
Compex WPQ864
Buffalo WXR-2533DHP

device with both enabled:
ZyXEL NBG6817
Netgear r7800

Here is the list I could have missed some user on the ath79 target but I
hope I made a point on how random this is and that we need dedicated
binding for this. Thanks for the review anyway.

--
Ansuel

\
 
 \ /
  Last update: 2021-10-07 19:10    [W:1.815 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site