lkml.org 
[lkml]   [2021]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/4] i2c: check bus number property in DesignWare I2C Controller
Date
On SoCFPGA systems, it's desireable to have fixed numbering for
i2c busses, while being able to enable/disable them (e.g. have i2c1
be mapped to /dev/i2c-1, even though i2c0 is disabled). This can also
be achieved using devicetree aliases (see i2c_add_adapter). However,
having the driver be self-contained without relying on aliases is more
robust.

Signed-off-by: Paweł Anikiel <pan@semihalf.com>
---
drivers/i2c/busses/i2c-designware-platdrv.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 21113665ddea..f27e6bc9ad9d 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -280,7 +280,8 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
I2C_CLASS_HWMON : I2C_CLASS_DEPRECATED;
ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
adap->dev.of_node = pdev->dev.of_node;
- adap->nr = -1;
+ if (of_property_read_u32(pdev->dev.of_node, "busno", &adap->nr))
+ adap->nr = -1;

if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
dev_pm_set_driver_flags(&pdev->dev,
--
2.25.1
\
 
 \ /
  Last update: 2021-10-05 16:39    [W:0.079 / U:1.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site