lkml.org 
[lkml]   [2021]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [RFC net-next PATCH 16/16] net: sfp: Add quirk to ignore PHYs
    On Mon, Oct 04, 2021 at 03:15:27PM -0400, Sean Anderson wrote:
    > Some modules have something at SFP_PHY_ADDR which isn't a PHY. If we try to
    > probe it, we might attach genphy anyway if addresses 2 and 3 return
    > something other than all 1s. To avoid this, add a quirk for these modules
    > so that we do not probe their PHY.
    >
    > The particular module in this case is a Finisar SFP-GB-GE-T. This module is
    > also worked around in xgbe_phy_finisar_phy_quirks() by setting the support
    > manually. However, I do not believe that it has a PHY in the first place:
    >
    > $ i2cdump -y -r 0-31 $BUS 0x56 w
    > 0,8 1,9 2,a 3,b 4,c 5,d 6,e 7,f
    > 00: ff01 ff01 ff01 c20c 010c 01c0 0f00 0120
    > 08: fc48 000e ff78 0000 0000 0000 0000 00f0
    > 10: 7800 00bc 0000 401c 680c 0300 0000 0000
    > 18: ff41 0000 0a00 8890 0000 0000 0000 0000

    Actually, I think that is a PHY. It's byteswapped (which is normal using
    i2cdump in this way). The real contents of the registers are:

    00: 01ff 01ff 01ff 0cc2 0c01 c001 000f 2001
    08: 48fc 0e00 78ff 0000 0000 0000 0000 f000
    10: 0078 bc00 0000 1c40 0c68 0003 0000 0000
    18: 41ff 0000 000a 9088 0000 0000 0000 0000

    It's advertising pause + asym pause, 1000BASE-T FD, link partner is also
    advertising 1000BASE-T FD but no pause abilities.

    When comparing this with a Marvell 88e1111:

    00: 1140 7949 0141 0cc2 05e1 0000 0004 2001
    08: 0000 0e00 4000 0000 0000 0000 0000 f000
    10: 0078 8100 0000 0040 0568 0000 0000 0000
    18: 4100 0000 0002 8084 0000 0000 0000 0000

    It looks remarkably similar. However, The first few reads seem to be
    corrupted with 0x01ff. It may be that the module is slow to allow the
    PHY to start responding - we've had similar with Champion One SFPs.

    It looks like it's a Marvell 88e1111. The register at 0x11 is the
    Marvell status register, and 0xbc00 indicates 1000Mbit, FD, AN
    resolved, link up which agrees with what's in the various other
    registers.

    --
    RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
    FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

    \
     
     \ /
      Last update: 2021-10-05 12:34    [W:4.202 / U:0.052 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site