lkml.org 
[lkml]   [2021]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/3] reset: socfpga: add empty driver allowing consumers to probe
From
Date
On Tue, 2021-10-05 at 13:12 +0200, Paweł Anikiel wrote:
> On Tue, Oct 5, 2021 at 11:34 AM Philipp Zabel <p.zabel@pengutronix.de> wrote:
> > Hi Paweł,
> >
> > On Mon, 2021-09-20 at 14:41 +0200, Paweł Anikiel wrote:
> > > The early reset driver doesn't ever probe, which causes consuming
> > > devices to be unable to probe. Add an empty driver to set this device
> > > as available, allowing consumers to probe.
> > >
> > > Signed-off-by: Paweł Anikiel <pan@semihalf.com>
> > > ---
> > > drivers/reset/reset-socfpga.c | 26 ++++++++++++++++++++++++++
> > > 1 file changed, 26 insertions(+)
> > >
> > > diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c
> > > index 2a72f861f798..8c6492e5693c 100644
> > > --- a/drivers/reset/reset-socfpga.c
> > > +++ b/drivers/reset/reset-socfpga.c
> > > @@ -92,3 +92,29 @@ void __init socfpga_reset_init(void)
> > > for_each_matching_node(np, socfpga_early_reset_dt_ids)
> > > a10_reset_init(np);
> > > }
> > > +
> > > +/*
> > > + * The early driver is problematic, because it doesn't register
> > > + * itself as a driver. This causes certain device links to prevent
> > > + * consumer devices from probing. The hacky solution is to register
> > > + * an empty driver, whose only job is to attach itself to the reset
> > > + * manager and call probe.
> > > + */
> > > +static const struct of_device_id socfpga_reset_dt_ids[] = {
> > > + { .compatible = "altr,rst-mgr", },
> > > + { /* sentinel */ },
> > > +};
> > > +
> > > +static int reset_simple_probe(struct platform_device *pdev)
> > > +{
> > > + return 0;
> > > +}
> > > +
> > > +static struct platform_driver reset_socfpga_driver = {
> > > + .probe = reset_simple_probe,
> > > + .driver = {
> > > + .name = "socfpga-reset",
> > > + .of_match_table = socfpga_reset_dt_ids,
> > > + },
> > > +};
> > > +builtin_platform_driver(reset_socfpga_driver);
> >
> > If we can just let devlink delay all consumers until the empty driver is
> > probed, does the reset controller have to be registered early at all?
> >
> > regards
> > Philipp
>
> I asked Dinh if the reset controller code needs to be called early:
>
> > That's correct. It's for one of the SP timers.

Ah, right, those call of_reset_control_get() from TIMER_OF_DECLARE().
Thank you, I'll apply this to reset/fixes.

regards
Philipp

\
 
 \ /
  Last update: 2021-10-05 12:23    [W:0.046 / U:1.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site