lkml.org 
[lkml]   [2021]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 02/10] backlight: qcom-wled: Use cpu_to_le16 macro to perform conversion
On Mon, Oct 04, 2021 at 09:27:33PM +0200, Marijn Suijten wrote:
> The kernel already provides appropriate primitives to perform endianness
> conversion which should be used in favour of manual bit-wrangling.
>
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>

Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>


> ---
> drivers/video/backlight/qcom-wled.c | 25 +++++++++++--------------
> 1 file changed, 11 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
> index 6af808af2328..9927ed98944a 100644
> --- a/drivers/video/backlight/qcom-wled.c
> +++ b/drivers/video/backlight/qcom-wled.c
> @@ -231,14 +231,14 @@ struct wled {
> static int wled3_set_brightness(struct wled *wled, u16 brightness)
> {
> int rc, i;
> - u8 v[2];
> + u16 v;
>
> - v[0] = brightness & 0xff;
> - v[1] = (brightness >> 8) & 0xf;
> + v = cpu_to_le16(brightness & WLED3_SINK_REG_BRIGHT_MAX);
>
> for (i = 0; i < wled->cfg.num_strings; ++i) {
> rc = regmap_bulk_write(wled->regmap, wled->ctrl_addr +
> - WLED3_SINK_REG_BRIGHT(i), v, 2);
> + WLED3_SINK_REG_BRIGHT(i),
> + &v, sizeof(v));
> if (rc < 0)
> return rc;
> }
> @@ -249,19 +249,18 @@ static int wled3_set_brightness(struct wled *wled, u16 brightness)
> static int wled4_set_brightness(struct wled *wled, u16 brightness)
> {
> int rc, i;
> - u16 low_limit = wled->max_brightness * 4 / 1000;
> - u8 v[2];
> + u16 v, low_limit = wled->max_brightness * 4 / 1000;
>
> /* WLED4's lower limit of operation is 0.4% */
> if (brightness > 0 && brightness < low_limit)
> brightness = low_limit;
>
> - v[0] = brightness & 0xff;
> - v[1] = (brightness >> 8) & 0xf;
> + v = cpu_to_le16(brightness & WLED3_SINK_REG_BRIGHT_MAX);
>
> for (i = 0; i < wled->cfg.num_strings; ++i) {
> rc = regmap_bulk_write(wled->regmap, wled->sink_addr +
> - WLED4_SINK_REG_BRIGHT(i), v, 2);
> + WLED4_SINK_REG_BRIGHT(i),
> + &v, sizeof(v));
> if (rc < 0)
> return rc;
> }
> @@ -272,22 +271,20 @@ static int wled4_set_brightness(struct wled *wled, u16 brightness)
> static int wled5_set_brightness(struct wled *wled, u16 brightness)
> {
> int rc, offset;
> - u16 low_limit = wled->max_brightness * 1 / 1000;
> - u8 v[2];
> + u16 v, low_limit = wled->max_brightness * 1 / 1000;
>
> /* WLED5's lower limit is 0.1% */
> if (brightness < low_limit)
> brightness = low_limit;
>
> - v[0] = brightness & 0xff;
> - v[1] = (brightness >> 8) & 0x7f;
> + v = cpu_to_le16(brightness & WLED5_SINK_REG_BRIGHT_MAX_15B);
>
> offset = (wled->cfg.mod_sel == MOD_A) ?
> WLED5_SINK_REG_MOD_A_BRIGHTNESS_LSB :
> WLED5_SINK_REG_MOD_B_BRIGHTNESS_LSB;
>
> rc = regmap_bulk_write(wled->regmap, wled->sink_addr + offset,
> - v, 2);
> + &v, sizeof(v));
> return rc;
> }
>
> --
> 2.33.0
>

\
 
 \ /
  Last update: 2021-10-05 11:08    [W:0.368 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site