lkml.org 
[lkml]   [2021]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/3] Add missing vdd-supply for QUSB2 PHY
On 04-10-21, 11:01, Shawn Guo wrote:
> Hi Vinod,
>
> On Fri, Oct 01, 2021 at 01:46:23PM +0530, Vinod Koul wrote:
> > Hi Shawn,
> >
> > On 28-09-21, 10:19, Shawn Guo wrote:
> > > The series adds missing vdd-supply for QUSB2 PHY which is required for
> > > digital circuit. The driver works right now likely because firmware
> > > already sets it up. Add it to bindings, driver and DTS that miss the
> > > supply.
> > >
> > > It should not cause problem for existing DTBs:
> > > - SC7180, SDM630, SDM845 based platforms already specified vdd-supply
> > > in the DTBs.
> > > - MSM8996 and MSM8998 platform DTBs miss vdd-supply, but dummy regulator
> > > will ensure QUSB2 PHY driver works as before on these platforms.
> >
> > What about the rest.. I checked SM8350 and SM8250 mtp ones are missing
> > this. With the property made mandatory, I guess it would cause these to
> > fail right..
>
> >From what I can see, SM8350 and SM8250 use qcom-snps-femto-v2 PHY
> rather than qcom-qusb2. So they should not be affected by this series.

Right, somehow I seem to have overlooked that part :(

I am applying this now, thanks

--
~Vinod

\
 
 \ /
  Last update: 2021-10-05 09:47    [W:0.052 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site