lkml.org 
[lkml]   [2021]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/4] arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones
Date
Downstream defines four ADC channels related to thermal sensors external
to the PM8998 and two channels for internal voltage measurements.

Add these to the upstream SDM845 MTP, describe the thermal monitor
channels and add thermal_zones for these.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v2:
- Added missing qcom,ratiometric and qcom,hw-settle-time-us from the ADC channels

arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 140 ++++++++++++++++++++++++
1 file changed, 140 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 52dd7a858231..9aa21399b7ee 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -10,6 +10,8 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"

/ {
model = "Qualcomm Technologies, Inc. SDM845 MTP";
@@ -46,6 +48,68 @@ vreg_s4a_1p8: pm8998-smps4 {

vin-supply = <&vph_pwr>;
};
+
+ thermal-zones {
+ xo_thermal: xo-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pm8998_adc_tm 1>;
+
+ trips {
+ trip-point {
+ temperature = <125000>;
+ hysteresis = <10000>;
+ type = "passive";
+ };
+ };
+ };
+
+ msm_thermal: msm-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pm8998_adc_tm 2>;
+
+ trips {
+ trip-point {
+ temperature = <125000>;
+ hysteresis = <10000>;
+ type = "passive";
+ };
+ };
+ };
+
+ pa_thermal: pa-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pm8998_adc_tm 3>;
+
+ trips {
+ trip-point {
+ temperature = <125000>;
+ hysteresis = <10000>;
+ type = "passive";
+ };
+ };
+ };
+
+ quiet_thermal: quiet-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pm8998_adc_tm 4>;
+
+ trips {
+ trip-point {
+ temperature = <125000>;
+ hysteresis = <10000>;
+ type = "passive";
+ };
+ };
+ };
+ };
};

&adsp_pas {
@@ -469,6 +533,82 @@ &mss_pil {
firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
};

+&pm8998_adc {
+ adc-chan@4c {
+ reg = <ADC5_XO_THERM_100K_PU>;
+ label = "xo_therm";
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ adc-chan@4d {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ label = "msm_therm";
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ adc-chan@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ label = "pa_therm1";
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ adc-chan@51 {
+ reg = <ADC5_AMUX_THM5_100K_PU>;
+ label = "quiet_therm";
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ adc-chan@83 {
+ reg = <ADC5_VPH_PWR>;
+ label = "vph_pwr";
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ adc-chan@85 {
+ reg = <ADC5_VCOIN>;
+ label = "vcoin";
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pm8998_adc_tm {
+ status = "okay";
+
+ xo-thermistor@1 {
+ reg = <1>;
+ io-channels = <&pm8998_adc ADC5_XO_THERM_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ msm-thermistor@2 {
+ reg = <2>;
+ io-channels = <&pm8998_adc ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ pa-thermistor@3 {
+ reg = <3>;
+ io-channels = <&pm8998_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ quiet-thermistor@4 {
+ reg = <4>;
+ io-channels = <&pm8998_adc ADC5_AMUX_THM5_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
&qupv3_id_1 {
status = "okay";
};
--
2.29.2
\
 
 \ /
  Last update: 2021-10-05 05:25    [W:0.071 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site