lkml.org 
[lkml]   [2021]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 03/11] regulator: qcom-rpmh: Add PM6350 regulators
Date
Hi Mark,

On Montag, 4. Oktober 2021 14:37:31 CEST Mark Brown wrote:
> On Sun, Oct 03, 2021 at 10:31:26AM +0200, Luca Weiss wrote:
> > Add the configuration for pm6350 regulators. The supplies are not known
> > so use dummy ones for now.
>
> If you don't know don't fix it into ABI, just don't specify anything
> until someone figures out something accurate to put in there.
>

The RPMH_VREG macro expects _supply_name so what should I put there instead?

> > Additionally leave out configuration of smps3 - smps5 and ldo17 as these
> > are not configured in the downstream kernel.
>
> Just describe everything that's there - nothing will get touched if the
> board doesn't explicitly enable doing so, otherwise everything is read
> only.

Problem is I do not know which types those regulators are, e.g. pldo or nldo.
The ones I described are experimentally verified because the wrong configuration
makes the driver probe fail.
So I can't really put anything there, unless there's another way to do this.

Regards
Luca


\
 
 \ /
  Last update: 2021-10-04 22:44    [W:0.056 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site