lkml.org 
[lkml]   [2021]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5] mfd: ti_am335x_tscadc: Add ADC1/magnetic reader support
Date
Introduce a new compatible that has another set of driver data,
targeting am437x SoCs with a magnetic reader instead of the
touchscreen and a more featureful set of registers.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---

Changes in v5:
* Let the 48 v4 patch series aside, while only resending this patch that
triggered a robot warning. Use the use_mag boolean instead of sticking
to tscmag_wires which was not optimal anyway, silencing the 'not used'
warning while keeping the code simple and clear.


drivers/mfd/ti_am335x_tscadc.c | 37 ++++++++++++++++++++++------
include/linux/mfd/ti_am335x_tscadc.h | 6 +++++
2 files changed, 36 insertions(+), 7 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 4f76b5498077..bfbc8288a71e 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -121,11 +121,11 @@ static int ti_tscadc_probe(struct platform_device *pdev)
struct mfd_cell *cell;
struct property *prop;
const __be32 *cur;
- bool use_tsc = false;
+ bool use_tsc = false, use_mag = false;
u32 val;
int err;
int tscmag_wires = 0, adc_channels = 0, cell_idx = 0, total_channels;
- int readouts = 0;
+ int readouts = 0, mag_tracks = 0;

/* Allocate memory for device */
tscadc = devm_kzalloc(&pdev->dev, sizeof(*tscadc), GFP_KERNEL);
@@ -148,6 +148,16 @@ static int ti_tscadc_probe(struct platform_device *pdev)
of_node_put(node);
if (tscmag_wires)
use_tsc = true;
+ } else {
+ /*
+ * When adding support for the magnetic stripe reader, here is
+ * the place to look for the number of tracks used from device
+ * tree. Let's default to 0 for now.
+ */
+ mag_tracks = 0;
+ tscmag_wires = mag_tracks * 2;
+ if (tscmag_wires)
+ use_mag = true;
}

node = of_get_child_by_name(pdev->dev.of_node, "adc");
@@ -209,8 +219,9 @@ static int ti_tscadc_probe(struct platform_device *pdev)
* The TSC_ADC_Subsystem has 2 clock domains: OCP_CLK and ADC_CLK.
* ADCs produce a 12-bit sample every 15 ADC_CLK cycles.
* am33xx ADCs expect to capture 200ksps.
- * We need the ADC clocks to run at 3MHz.
- * This frequency is valid since TSC_ADC_SS controller design
+ * am47xx ADCs expect to capture 867ksps.
+ * We need ADC clocks respectively running at 3MHz and 13MHz.
+ * These frequencies are valid since TSC_ADC_SS controller design
* assumes the OCP clock is at least 6x faster than the ADC clock.
*/
clk = devm_clk_get(&pdev->dev, NULL);
@@ -238,6 +249,9 @@ static int ti_tscadc_probe(struct platform_device *pdev)
else
tscadc->ctrl |= CNTRLREG_TSC_4WIRE;
}
+ } else {
+ tscadc->ctrl |= CNTRLREG_MAG_PREAMP_PWRDOWN |
+ CNTRLREG_MAG_PREAMP_BYPASS;
}
regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);

@@ -246,8 +260,8 @@ static int ti_tscadc_probe(struct platform_device *pdev)
/* Enable the TSC module enable bit */
regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl | CNTRLREG_SSENB);

- /* TSC Cell */
- if (tscmag_wires > 0) {
+ /* TSC or MAG Cell */
+ if (use_tsc || use_mag) {
cell = &tscadc->cells[cell_idx++];
cell->name = tscadc->data->secondary_feature_name;
cell->of_compatible = tscadc->data->secondary_feature_compatible;
@@ -340,8 +354,17 @@ static const struct ti_tscadc_data tscdata = {
.target_clk_rate = TSC_ADC_CLK,
};

+static const struct ti_tscadc_data magdata = {
+ .adc_feature_name = "TI-am43xx-adc",
+ .adc_feature_compatible = "ti,am4372-adc",
+ .secondary_feature_name = "TI-am43xx-mag",
+ .secondary_feature_compatible = "ti,am4372-mag",
+ .target_clk_rate = MAG_ADC_CLK,
+};
+
static const struct of_device_id ti_tscadc_dt_ids[] = {
{ .compatible = "ti,am3359-tscadc", .data = &tscdata },
+ { .compatible = "ti,am4372-magadc", .data = &magdata },
{ }
};
MODULE_DEVICE_TABLE(of, ti_tscadc_dt_ids);
@@ -359,6 +382,6 @@ static struct platform_driver ti_tscadc_driver = {

module_platform_driver(ti_tscadc_driver);

-MODULE_DESCRIPTION("TI touchscreen / ADC MFD controller driver");
+MODULE_DESCRIPTION("TI touchscreen/magnetic stripe reader/ADC MFD controller driver");
MODULE_AUTHOR("Rachna Patil <rachna@ti.com>");
MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index ee160b2036c1..5225e3fc194d 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -106,6 +106,11 @@
#define CNTRLREG_TSC_8WIRE CNTRLREG_TSC_AFE_CTRL(3)
#define CNTRLREG_TSC_ENB BIT(7)

+/*Control registers bitfields for MAGADC IP */
+#define CNTRLREG_MAGADCENB BIT(0)
+#define CNTRLREG_MAG_PREAMP_PWRDOWN BIT(5)
+#define CNTRLREG_MAG_PREAMP_BYPASS BIT(6)
+
/* FIFO READ Register */
#define FIFOREAD_DATA_MASK GENMASK(11, 0)
#define FIFOREAD_CHNLID_MASK GENMASK(19, 16)
@@ -119,6 +124,7 @@
#define CHARGE_STEP 0x11

#define TSC_ADC_CLK (3 * HZ_PER_MHZ)
+#define MAG_ADC_CLK (13 * HZ_PER_MHZ)
#define TOTAL_STEPS 16
#define TOTAL_CHANNELS 8
#define FIFO1_THRESHOLD 19
--
2.27.0
\
 
 \ /
  Last update: 2021-10-04 17:54    [W:1.681 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site