lkml.org 
[lkml]   [2021]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 03/10] dts: aspeed: ast2600: Support SDR50 for SD device


On Wed, 22 Sep 2021, at 20:01, Chin-Ting Kuo wrote:
> The maximum frequency for SD controller on AST2600 EVB is
> 100MHz. In order to achieve 100MHz, sd-uhs-sdr50 property
> should be added and the driver will set the SDR50 supported
> bit in capability 2 register during probing stage.
>
> Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>

As this is a limitation of the SoC it should be done in aspeed-g6.dtsi.
Unless I've misunderstood?

Andrew

> ---
> arch/arm/boot/dts/aspeed-ast2600-evb.dts | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
> b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
> index b7eb552640cb..4551dba499c2 100644
> --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
> +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
> @@ -280,6 +280,7 @@
> &sdhci0 {
> status = "okay";
> bus-width = <4>;
> + sd-uhs-sdr50;
> max-frequency = <100000000>;
> sdhci-drive-type = /bits/ 8 <3>;
> sdhci-caps-mask = <0x7 0x0>;
> @@ -292,6 +293,7 @@
> &sdhci1 {
> status = "okay";
> bus-width = <4>;
> + sd-uhs-sdr50;
> max-frequency = <100000000>;
> sdhci-drive-type = /bits/ 8 <3>;
> sdhci-caps-mask = <0x7 0x0>;
> --
> 2.17.1

\
 
 \ /
  Last update: 2021-10-26 02:43    [W:0.383 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site