lkml.org 
[lkml]   [2021]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/2] arm64: PCI: hv: Add support for Hyper-V vPCI
On Thu, 14 Oct 2021 16:53:14 +0100,
Sunil Muthuswamy <sunilmut@linux.microsoft.com> wrote:
>
> From: Sunil Muthuswamy <sunilmut@microsoft.com>
>
> Add support for Hyper-V vPCI for ARM64 by implementing the arch specific
> interfaces. Introduce an IRQ domain and chip specific to Hyper-v vPCI that
> is based on SPIs. The IRQ domain parents itself to the arch GIC IRQ domain
> for basic vector management.
>
> Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
> ---
> In v2 & v3:
> Changes are described in the cover letter.
>
> arch/arm64/include/asm/hyperv-tlfs.h | 9 +
> drivers/pci/Kconfig | 2 +-
> drivers/pci/controller/Kconfig | 2 +-
> drivers/pci/controller/pci-hyperv-irqchip.c | 210 ++++++++++++++++++++
> drivers/pci/controller/pci-hyperv.c | 6 +
> 5 files changed, 227 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/include/asm/hyperv-tlfs.h b/arch/arm64/include/asm/hyperv-tlfs.h
> index 4d964a7f02ee..bc6c7ac934a1 100644
> --- a/arch/arm64/include/asm/hyperv-tlfs.h
> +++ b/arch/arm64/include/asm/hyperv-tlfs.h
> @@ -64,6 +64,15 @@
> #define HV_REGISTER_STIMER0_CONFIG 0x000B0000
> #define HV_REGISTER_STIMER0_COUNT 0x000B0001
>
> +union hv_msi_entry {
> + u64 as_uint64[2];
> + struct {
> + u64 address;
> + u32 data;
> + u32 reserved;
> + } __packed;
> +};
> +
> #include <asm-generic/hyperv-tlfs.h>
>
> #endif
> diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
> index 0c473d75e625..36dc94407510 100644
> --- a/drivers/pci/Kconfig
> +++ b/drivers/pci/Kconfig
> @@ -184,7 +184,7 @@ config PCI_LABEL
>
> config PCI_HYPERV
> tristate "Hyper-V PCI Frontend"
> - depends on X86_64 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && SYSFS
> + depends on (X86_64 || ARM64) && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && SYSFS
> select PCI_HYPERV_INTERFACE
> help
> The PCI device frontend driver allows the kernel to import arbitrary
> diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
> index 326f7d13024f..15271f8a0dd1 100644
> --- a/drivers/pci/controller/Kconfig
> +++ b/drivers/pci/controller/Kconfig
> @@ -280,7 +280,7 @@ config PCIE_BRCMSTB
>
> config PCI_HYPERV_INTERFACE
> tristate "Hyper-V PCI Interface"
> - depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64
> + depends on (X86_64 || ARM64) && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN
> help
> The Hyper-V PCI Interface is a helper driver allows other drivers to
> have a common interface with the Hyper-V PCI frontend driver.
> diff --git a/drivers/pci/controller/pci-hyperv-irqchip.c b/drivers/pci/controller/pci-hyperv-irqchip.c
> index 36fa862f8bc5..ccecd14b6601 100644
> --- a/drivers/pci/controller/pci-hyperv-irqchip.c
> +++ b/drivers/pci/controller/pci-hyperv-irqchip.c
> @@ -52,6 +52,216 @@ int hv_msi_prepare(struct irq_domain *domain, struct device *dev,
> }
> EXPORT_SYMBOL(hv_msi_prepare);
>
> +#elif CONFIG_ARM64
> +
> +/*
> + * SPI vectors to use for vPCI; arch SPIs range is [32, 1019], but leaving a bit
> + * of room at the start to allow for SPIs to be specified through ACPI and
> + * starting with a power of two to satisfy power of 2 multi-MSI requirement.
> + */
> +#define HV_PCI_MSI_SPI_START 64
> +#define HV_PCI_MSI_SPI_NR (1020 - HV_PCI_MSI_SPI_START)
> +
> +struct hv_pci_chip_data {
> + DECLARE_BITMAP(spi_map, HV_PCI_MSI_SPI_NR);
> + struct mutex map_lock;
> +};
> +
> +/* Hyper-V vPCI MSI GIC IRQ domain */
> +static struct irq_domain *hv_msi_gic_irq_domain;
> +
> +/* Hyper-V PCI MSI IRQ chip */
> +static struct irq_chip hv_msi_irq_chip = {
> + .name = "MSI",
> + .irq_set_affinity = irq_chip_set_affinity_parent,
> + .irq_eoi = irq_chip_eoi_parent,
> + .irq_mask = irq_chip_mask_parent,
> + .irq_unmask = irq_chip_unmask_parent
> +};
> +
> +unsigned int hv_msi_get_int_vector(struct irq_data *irqd)
> +{
> + irqd = irq_domain_get_irq_data(hv_msi_gic_irq_domain, irqd->irq);
> +
> + return irqd->hwirq;

Really??? Why isn't this just:

return irqd->parent_data->hwirq;

instead of reparsing the whole hierarchy?

> +}
> +EXPORT_SYMBOL(hv_msi_get_int_vector);
> +
> +void hv_set_msi_entry_from_desc(union hv_msi_entry *msi_entry,
> + struct msi_desc *msi_desc)
> +{
> + msi_entry->address = ((u64)msi_desc->msg.address_hi << 32) |
> + msi_desc->msg.address_lo;
> + msi_entry->data = msi_desc->msg.data;
> +}
> +EXPORT_SYMBOL(hv_set_msi_entry_from_desc);
> +
> +int hv_msi_prepare(struct irq_domain *domain, struct device *dev,
> + int nvec, msi_alloc_info_t *info)
> +{
> + return 0;
> +}
> +EXPORT_SYMBOL(hv_msi_prepare);
> +
> +static void hv_pci_vec_irq_domain_free(struct irq_domain *domain,
> + unsigned int virq, unsigned int nr_irqs)
> +{
> + struct hv_pci_chip_data *chip_data = domain->host_data;
> + struct irq_data *irqd = irq_domain_get_irq_data(domain, virq);
> + int first = irqd->hwirq - HV_PCI_MSI_SPI_START;
> +
> + mutex_lock(&chip_data->map_lock);
> + bitmap_release_region(chip_data->spi_map,
> + first,
> + get_count_order(nr_irqs));
> + mutex_unlock(&chip_data->map_lock);
> + irq_domain_reset_irq_data(irqd);
> + irq_domain_free_irqs_parent(domain, virq, nr_irqs);
> +}
> +
> +static int hv_pci_vec_alloc_device_irq(struct irq_domain *domain,
> + unsigned int nr_irqs,
> + irq_hw_number_t *hwirq)
> +{
> + struct hv_pci_chip_data *chip_data = domain->host_data;
> + unsigned int index;
> +
> + /* Find and allocate region from the SPI bitmap */
> + mutex_lock(&chip_data->map_lock);
> + index = bitmap_find_free_region(chip_data->spi_map,
> + HV_PCI_MSI_SPI_NR,
> + get_count_order(nr_irqs));
> + mutex_unlock(&chip_data->map_lock);
> + if (index < 0)
> + return -ENOSPC;
> +
> + *hwirq = index + HV_PCI_MSI_SPI_START;
> +
> + return 0;
> +}
> +
> +static int hv_pci_vec_irq_gic_domain_alloc(struct irq_domain *domain,
> + unsigned int virq,
> + irq_hw_number_t hwirq)
> +{
> + struct irq_fwspec fwspec;
> +
> + fwspec.fwnode = domain->parent->fwnode;
> + fwspec.param_count = 2;
> + fwspec.param[0] = hwirq;
> + fwspec.param[1] = IRQ_TYPE_EDGE_RISING;
> +
> + return irq_domain_alloc_irqs_parent(domain, virq, 1, &fwspec);
> +}
> +
> +static int hv_pci_vec_irq_domain_alloc(struct irq_domain *domain,
> + unsigned int virq, unsigned int nr_irqs,
> + void *args)
> +{
> + irq_hw_number_t hwirq;
> + unsigned int i;
> + int ret;
> +
> + ret = hv_pci_vec_alloc_device_irq(domain, nr_irqs, &hwirq);
> + if (ret)
> + return ret;
> +
> + for (i = 0; i < nr_irqs; i++) {
> + ret = hv_pci_vec_irq_gic_domain_alloc(domain, virq + i,
> + hwirq + i);
> + if (ret)
> + goto free_irq;
> +
> + ret = irq_domain_set_hwirq_and_chip(domain, virq + i,
> + hwirq + i, &hv_msi_irq_chip,
> + domain->host_data);
> + if (ret)
> + goto free_irq;
> +
> + pr_debug("pID:%d vID:%u\n", (int)(hwirq + i), virq + i);
> + }
> +
> + return 0;
> +
> +free_irq:
> + hv_pci_vec_irq_domain_free(domain, virq, nr_irqs);
> +
> + return ret;
> +}
> +
> +static int hv_pci_vec_irq_domain_activate(struct irq_domain *domain,
> + struct irq_data *irqd, bool reserve)
> +{
> + /* All available online CPUs are available for targeting */
> + irq_data_update_effective_affinity(irqd, cpu_online_mask);

This looks odd. Linux doesn't use 1:N distribution with the GIC, so
the effective affinity of the interrupt never targets all CPUs.
Specially considering that the first irq_set_affinity() call is going
to reset it to something more realistic.

I don't think you should have this at all, but I also suspect that you
are playing all sort of games behind the scenes.

> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops hv_pci_domain_ops = {
> + .alloc = hv_pci_vec_irq_domain_alloc,
> + .free = hv_pci_vec_irq_domain_free,
> + .activate = hv_pci_vec_irq_domain_activate,
> +};
> +
> +int hv_pci_irqchip_init(struct irq_domain **parent_domain,
> + bool *fasteoi_handler,
> + u8 *delivery_mode)
> +{
> + static struct hv_pci_chip_data *chip_data;
> + struct fwnode_handle *fn = NULL;
> + int ret = -ENOMEM;
> +
> + chip_data = kzalloc(sizeof(*chip_data), GFP_KERNEL);
> + if (!chip_data)
> + return ret;
> +
> + mutex_init(&chip_data->map_lock);
> + fn = irq_domain_alloc_named_fwnode("Hyper-V ARM64 vPCI");
> + if (!fn)
> + goto free_chip;
> +
> + hv_msi_gic_irq_domain = acpi_irq_create_hierarchy(0, HV_PCI_MSI_SPI_NR,
> + fn, &hv_pci_domain_ops,
> + chip_data);
> +
> + if (!hv_msi_gic_irq_domain) {
> + pr_err("Failed to create Hyper-V ARMV vPCI MSI IRQ domain\n");
> + goto free_chip;
> + }
> +
> + *parent_domain = hv_msi_gic_irq_domain;
> + *fasteoi_handler = true;
> +
> + /* Delivery mode: Fixed */
> + *delivery_mode = 0;

I discussed this to death in the previous patch.

> +
> + return 0;
> +
> +free_chip:
> + kfree(chip_data);
> + if (fn)
> + irq_domain_free_fwnode(fn);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(hv_pci_irqchip_init);
> +
> +void hv_pci_irqchip_free(void)
> +{
> + static struct hv_pci_chip_data *chip_data;
> +
> + if (!hv_msi_gic_irq_domain)
> + return;
> +
> + /* Host data cannot be null if the domain was created successfully */
> + chip_data = hv_msi_gic_irq_domain->host_data;
> + irq_domain_remove(hv_msi_gic_irq_domain);

No. Once an interrupt controller is enabled, it should never go away,
because we have no way to ensure that all the corresponding interrupts
are actually gone. Unless you can prove that at this stage, all
devices are gone and cannot possibly generate any interrupt, this is
actively harmful.

> + hv_msi_gic_irq_domain = NULL;
> + kfree(chip_data);
> +}
> +EXPORT_SYMBOL(hv_pci_irqchip_free);
> +
> #endif
>
> MODULE_LICENSE("GPL v2");
> diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
> index 2d3916206986..a77d0eaedac3 100644
> --- a/drivers/pci/controller/pci-hyperv.c
> +++ b/drivers/pci/controller/pci-hyperv.c
> @@ -44,6 +44,7 @@
> #include <linux/delay.h>
> #include <linux/semaphore.h>
> #include <linux/irq.h>
> +#include <linux/irqdomain.h>
> #include <linux/msi.h>
> #include <linux/hyperv.h>
> #include <linux/refcount.h>
> @@ -1204,6 +1205,8 @@ static int hv_set_affinity(struct irq_data *data, const struct cpumask *dest,
> static void hv_irq_mask(struct irq_data *data)
> {
> pci_msi_mask_irq(data);
> + if (data->parent_data->chip->irq_mask)
> + irq_chip_mask_parent(data);
> }
>
> /**
> @@ -1321,6 +1324,8 @@ static void hv_irq_unmask(struct irq_data *data)
> dev_err(&hbus->hdev->device,
> "%s() failed: %#llx", __func__, res);
>
> + if (data->parent_data->chip->irq_unmask)
> + irq_chip_unmask_parent(data);
> pci_msi_unmask_irq(data);
> }
>
> @@ -1597,6 +1602,7 @@ static struct irq_chip hv_msi_irq_chip = {
> .irq_compose_msi_msg = hv_compose_msi_msg,
> .irq_set_affinity = hv_set_affinity,

This really is irq_chip_set_affinity_parent.

> .irq_ack = irq_chip_ack_parent,
> + .irq_eoi = irq_chip_eoi_parent,
> .irq_mask = hv_irq_mask,
> .irq_unmask = hv_irq_unmask,
> };

Overall, please kill this extra module, move everything into
pci-hyperv.c and drop the useless abstractions. Once you do that, the
code will be far easier to reason about.

M.

--
Without deviation from the norm, progress is not possible.

\
 
 \ /
  Last update: 2021-10-24 14:55    [W:0.186 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site