lkml.org 
[lkml]   [2021]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] spi: spi-nxp-fspi: don't depend on a specific node name erratum workaround
Am 2021-10-02 11:23, schrieb Vladimir Oltean:
> On Sat, Oct 02, 2021 at 10:58:31AM +0200, Michael Walle wrote:
>> Am 2021-10-02 03:37, schrieb Vladimir Oltean:
>> > On Fri, Oct 01, 2021 at 11:27:26PM +0200, Michael Walle wrote:
>>
>> > > Make the workaround more reliable and just drop the unneeded sysclk
>> > > lookup.
>> > >
>> > > For reference, the error during the bootup is the following:
>> > > [ 4.898400] nxp-fspi 20c0000.spi: Errata cannot be executed. Read
>> > > via IP bus may not work
>> >
>> > Well, in Kuldeep's defence, at least this part is sane, right? I mean we
>> > cannot prove an issue => we don't disable reads via the AHB. So it's
>> > just the error message (which I didn't notice TBH, sorry).
>>
>> Its just an error message in case the platform clock is 400Mhz. But
>> if you have a 300MHz platform clock the workaround wouldn't be
>> applied.
>
> Understood, that's why I asked...
>
>> The reference is just there if someone stumbles over this error and
>> searches for it on google.
>>
>> > On the other hand, is anyone using LS1028A with a platform clock of 300
>> > MHz? :)
>
> ...this.

Which I can't answer ;)

>
>> > > Fixes: 82ce7d0e74b6 ("spi: spi-nxp-fspi: Implement errata workaround
>> > > for LS1028A")
>> > > Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
>> > > Signed-off-by: Michael Walle <michael@walle.cc>
>> > > ---
>> > > drivers/spi/spi-nxp-fspi.c | 26 +++++++-------------------
>> > > 1 file changed, 7 insertions(+), 19 deletions(-)
>> > >
>> > > diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
>> > > index a66fa97046ee..2b0301fc971c 100644
>> > > --- a/drivers/spi/spi-nxp-fspi.c
>> > > +++ b/drivers/spi/spi-nxp-fspi.c
>> > > @@ -33,6 +33,7 @@
>> > >
>> > > #include <linux/acpi.h>
>> > > #include <linux/bitops.h>
>> > > +#include <linux/bitfield.h>
>> > > #include <linux/clk.h>
>> > > #include <linux/completion.h>
>> > > #include <linux/delay.h>
>> > > @@ -315,6 +316,7 @@
>> > > #define NXP_FSPI_MIN_IOMAP SZ_4M
>> > >
>> > > #define DCFG_RCWSR1 0x100
>> > > +#define SYS_PLL_RAT GENMASK(6, 2)
>> >
>> > Ugh. So your solution still makes a raw read of the platform PLL value
>> > from the DCFG, now it just adds a nice definition for it. Not nice.
>>
>> Keep in mind that this is intended to be a fixes commit. I agree with
>> you that having a new clock in the device tree and checking that would
>> have been better. Feel free to change the workaround after this fix
>> is applied (without a fixes tag), but I don't think introducing a new
>> clock (and you forgot to update the bindings) will qualify as a fixes
>> commit. Esp. when you change the compatible string.
>
> I think it could be justified as a fixes commit to Shawn Guo - the
> LS1028A is not "compatible" with LX2160A in the sense that it has
> software-visible errata which LX2160A doesn't have.

And you'd need to get Rob into the boat for the dt bindings "fixes",
no? For the new clock.

>> > > /* Access flash memory using IP bus only */
>> > > #define FSPI_QUIRK_USE_IP_ONLY BIT(0)
>> > > @@ -926,9 +928,8 @@ static void erratum_err050568(struct nxp_fspi *f)
>> > > { .family = "QorIQ LS1028A" },
>> > > { /* sentinel */ }
>> > > };
>> > > - struct device_node *np;
>> > > struct regmap *map;
>> > > - u32 val = 0, sysclk = 0;
>> > > + u32 val, sys_pll_ratio;
>> > > int ret;
>> > >
>> > > /* Check for LS1028A family */
>> > > @@ -937,7 +938,6 @@ static void erratum_err050568(struct nxp_fspi *f)
>> > > return;
>> > > }
>> > >
>> > > - /* Compute system clock frequency multiplier ratio */
>> > > map = syscon_regmap_lookup_by_compatible("fsl,ls1028a-dcfg");
>> > > if (IS_ERR(map)) {
>> > > dev_err(f->dev, "No syscon regmap\n");
>> > > @@ -948,23 +948,11 @@ static void erratum_err050568(struct nxp_fspi
>> > > *f)
>> > > if (ret < 0)
>> > > goto err;
>> > >
>> > > - /* Strap bits 6:2 define SYS_PLL_RAT i.e frequency multiplier
>> > > ratio */
>> > > - val = (val >> 2) & 0x1F;
>> > > - WARN(val == 0, "Strapping is zero: Cannot determine ratio");
>> > > + sys_pll_ratio = FIELD_GET(SYS_PLL_RAT, val);
>> > > + dev_dbg(f->dev, "val: 0x%08x, sys_pll_ratio: %d\n", val,
>> > > sys_pll_ratio);
>> >
>> > Do we really feel that this dev_dbg is valuable?
>>
>> No, I just briefly looked at it to see it prints 4 ;)
>>
>> > > - /* Compute system clock frequency */
>> > > - np = of_find_node_by_name(NULL, "clock-sysclk");
>> > > - if (!np)
>> > > - goto err;
>> > > -
>> > > - if (of_property_read_u32(np, "clock-frequency", &sysclk))
>> > > - goto err;
>> > > -
>> > > - sysclk = (sysclk * val) / 1000000; /* Convert sysclk to Mhz */
>> > > - dev_dbg(f->dev, "val: 0x%08x, sysclk: %dMhz\n", val, sysclk);
>> > > -
>> > > - /* Use IP bus only if PLL is 300MHz */
>> > > - if (sysclk == 300)
>> > > + /* Use IP bus only if platform clock is 300MHz */
>> > > + if (sys_pll_ratio == 3)
>> > > f->devtype_data->quirks |= FSPI_QUIRK_USE_IP_ONLY;
>> > >
>> > > return;
>> > > --
>> > > 2.30.2
>> > >
>> >
>> > How about:
>> >
>> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
>> > b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
>> > index 343ecf0e8973..ffe820c22719 100644
>> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
>> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
>> > @@ -326,15 +326,17 @@ i2c7: i2c@2070000 {
>> > };
>> >
>> > fspi: spi@20c0000 {
>> > - compatible = "nxp,lx2160a-fspi";
>> > + compatible = "nxp,ls1028a-fspi";
>>
>> Why not
>> compatible = "nxp,ls1028a-fspi", "nxp,lx2160a-fspi";
>> to keep at least some compatibility.
>
> Of course that would be even better. I just wanted to rush to get here
> before Mark, and it looks like I still didn't make it in time.
>
> Worst case, new (cleaned up to not calculate the platform clock on its
> own)
> driver will still probe with old device tree, but not apply the ERR
> workaround for 300 MHz systems.

No worst case is, the flexspi driver doesn't probe at all (new
devicetree,
old kernel ;).

> I may be ignorant here, but I just don't know how many systems use 300
> MHz platform in practice. Anyway, it's always difficult to fix up
> something that came to depend on DT bindings in a certain way.
>
>> > #address-cells = <1>;
>> > #size-cells = <0>;
>> > reg = <0x0 0x20c0000 0x0 0x10000>,
>> > <0x0 0x20000000 0x0 0x10000000>;
>> > reg-names = "fspi_base", "fspi_mmap";
>> > interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
>> > - clocks = <&fspi_clk>, <&fspi_clk>;
>> > - clock-names = "fspi_en", "fspi";
>> > + clocks = <&fspi_clk>, <&fspi_clk>,
>> > + <&clockgen QORIQ_CLK_PLATFORM_PLL
>> > + QORIQ_CLK_PLL_DIV(2)>;
>> > + clock-names = "fspi_en", "fspi", "base";
>> > status = "disabled";
>> > };
>> >
>> > diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
>> > index a66fa97046ee..f2815e6cae2c 100644
>> > --- a/drivers/spi/spi-nxp-fspi.c
>> > +++ b/drivers/spi/spi-nxp-fspi.c
>> > @@ -314,8 +314,6 @@
>> > #define NXP_FSPI_MAX_CHIPSELECT 4
>> > #define NXP_FSPI_MIN_IOMAP SZ_4M
>> >
>> > -#define DCFG_RCWSR1 0x100
>> > -
>> > /* Access flash memory using IP bus only */
>> > #define FSPI_QUIRK_USE_IP_ONLY BIT(0)
>> >
>> > @@ -922,55 +920,18 @@ static int nxp_fspi_adjust_op_size(struct
>> > spi_mem *mem, struct spi_mem_op *op)
>> >
>> > static void erratum_err050568(struct nxp_fspi *f)
>> > {
>> > - const struct soc_device_attribute ls1028a_soc_attr[] = {
>> > - { .family = "QorIQ LS1028A" },
>> > - { /* sentinel */ }
>> > - };
>>
>> Mh, I see how you came to the conclusion to rename the compatible
>> string. But normally, this also contains a revision check,
>> which is missing here IMHO. It might as well be fixed in the
>> next revision (though we both know, this is highly unlikely; its
>> still wrong). So while you could rename the compatible (oh no!)
>> you'd still have to do the rev 1.0 check here.
>
> So you want a compatible string a la "fsl,ls1021a-v1.0-dspi", right?
> I don't know, no strong opinion, as you said, we both know that no
> LS1028A rev 2 seems to be planned.

Nooo. No revisions in the compatible string.

const struct soc_device_attribute ls1028a_soc_attr[] = {
{ .family = "QorIQ LS1028A", .revision = "1.0" },
{ }
};

Thus you'd still need that check above.

-michael

\
 
 \ /
  Last update: 2021-10-02 11:34    [W:0.050 / U:4.936 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site