lkml.org 
[lkml]   [2021]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 4/7] remoteproc: create the REMOTEPROC_VIRTIO config
On Fri, Oct 01, 2021 at 12:12:31PM +0200, Arnaud Pouliquen wrote:
> Create the config to associate to the remoteproc virtio.
>
> Notice that the REMOTEPROC_VIRTIO config can not set to m. the reason
> is that it defines API that is used by the built-in remote proc core.
> Functions such are rproc_add_virtio_dev can be called during the
> Linux boot phase.
>
> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
> ---
> drivers/remoteproc/Kconfig | 11 +++++++++-
> drivers/remoteproc/Makefile | 2 +-
> drivers/remoteproc/remoteproc_internal.h | 28 ++++++++++++++++++++++++
> 3 files changed, 39 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index 9a6eedc3994a..f271552c0d84 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -6,7 +6,7 @@ config REMOTEPROC
> depends on HAS_DMA
> select CRC32
> select FW_LOADER
> - select VIRTIO
> + select REMOTEPROC_VIRTIO
> select WANT_DEV_COREDUMP
> help
> Support for remote processors (such as DSP coprocessors). These
> @@ -14,6 +14,15 @@ config REMOTEPROC
>
> if REMOTEPROC
>
> +config REMOTEPROC_VIRTIO
> + bool "Remoteproc virtio device "
> + select VIRTIO
> + help
> + Say y here to have a virtio device support for the remoteproc
> + communication.
> +
> + It's safe to say N if you don't use the virtio for the IPC.

This one is weird but there is no need to comment further after reading your
conversation with Bjorn.

> +
> config REMOTEPROC_CDEV
> bool "Remoteproc character device interface"
> help
> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> index bb26c9e4ef9c..73d2384a76aa 100644
> --- a/drivers/remoteproc/Makefile
> +++ b/drivers/remoteproc/Makefile
> @@ -8,8 +8,8 @@ remoteproc-y := remoteproc_core.o
> remoteproc-y += remoteproc_coredump.o
> remoteproc-y += remoteproc_debugfs.o
> remoteproc-y += remoteproc_sysfs.o
> -remoteproc-y += remoteproc_virtio.o
> remoteproc-y += remoteproc_elf_loader.o
> +obj-$(CONFIG_REMOTEPROC_VIRTIO) += remoteproc_virtio.o
> obj-$(CONFIG_REMOTEPROC_CDEV) += remoteproc_cdev.o
> obj-$(CONFIG_IMX_REMOTEPROC) += imx_rproc.o
> obj-$(CONFIG_INGENIC_VPU_RPROC) += ingenic_rproc.o
> diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
> index 152fe2e8668a..4ce012c353c0 100644
> --- a/drivers/remoteproc/remoteproc_internal.h
> +++ b/drivers/remoteproc/remoteproc_internal.h
> @@ -30,10 +30,38 @@ int rproc_of_parse_firmware(struct device *dev, int index,
> const char **fw_name);
>
> /* from remoteproc_virtio.c */
> +#if IS_ENABLED(CONFIG_REMOTEPROC_VIRTIO)
> +
> int rproc_rvdev_add_device(struct rproc_vdev *rvdev);
> irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id);
> void rproc_vdev_release(struct kref *ref);
>
> +#else
> +
> +int rproc_rvdev_add_device(struct rproc_vdev *rvdev)
> +{
> + /* This shouldn't be possible */
> + WARN_ON(1);
> +
> + return -ENXIO;
> +}
> +
> +static inline irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id)
> +{
> + /* This shouldn't be possible */
> + WARN_ON(1);
> +
> + return IRQ_NONE;
> +}
> +
> +static inline void rproc_vdev_release(struct kref *ref)
> +{
> + /* This shouldn't be possible */
> + WARN_ON(1);
> +}
> +
> +#endif
> +
> /* from remoteproc_debugfs.c */
> void rproc_remove_trace_file(struct dentry *tfile);
> struct dentry *rproc_create_trace_file(const char *name, struct rproc *rproc,
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2021-10-19 19:49    [W:2.760 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site