Messages in this thread | | | Date | Mon, 18 Oct 2021 15:47:02 +0100 | From | "Russell King (Oracle)" <> | Subject | Re: [PATCH] net: sfp: add quirk for Finisar FTLF8536P4BCL |
| |
On Wed, Oct 13, 2021 at 12:45:42PM +0200, Paul Menzel wrote: > From: Taras Chornyi <taras.chornyi@plvision.eu> > > Finisar FTLF8536P4BCL can operate at 1000base-X and 10000base-SR, but > reports 25G & 100GBd SR in it's EEPROM. > > Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> > Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> > > [Upstream from https://github.com/dentproject/dentOS/pull/133/commits/b87b10ef72ea4638e80588facf3c9c2c1be67b40] > > Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Thanks Vadym for the eeprom dump.
> diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c > index 7362f8c3271c..162b4030a863 100644 > --- a/drivers/net/phy/sfp-bus.c > +++ b/drivers/net/phy/sfp-bus.c > @@ -55,6 +55,13 @@ static void sfp_quirk_ubnt_uf_instant(const struct sfp_eeprom_id *id, > phylink_set(modes, 1000baseX_Full); > } > > +static void sfp_quirk_finisar_25g(const struct sfp_eeprom_id *id, > + unsigned long *modes) > +{ > + phylink_set(modes, 1000baseX_Full); > + phylink_set(modes, 10000baseSR_Full); > +}
I'd ask that this is named "sfp_quirk_1g10g()" please - it isn't doing anything that is specific to Finisar, it is merely stating that 1000base-X and 10000base-SR are supported.
> + }, { > + // Finisar FTLF8536P4BCL can operate at 1000base-X and 10000base-SR, > + // but reports 25G & 100GBd SR in it's EEPROM
This file doesn't wrap over column 80, so please continue to keeping it that way.
// Finisar FTLF8536P4BCL can operate at 1000base-X and // 10000base-SR, but reports 25G & 100GBd SR in it's EEPROM
Thanks.
-- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
| |