lkml.org 
[lkml]   [2021]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH net-next 1/6] ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch
From
Date
On 10/13/21 3:23 PM, Vladimir Oltean wrote:
> In the new behavior, the sja1105 driver expects there to be explicit
> RGMII delays present on the fixed-link ports, otherwise it will complain
> that it falls back to legacy behavior, which is to apply RGMII delays
> incorrectly derived from the phy-mode string.
>
> In this case, the legacy behavior of the driver is to apply both RX and
> TX delays. To preserve that, add explicit 2 nanosecond delays, which are
> identical with what the driver used to add (a 90 degree phase shift).
> The delays from the phy-mode are ignored by new kernels (it's still
> RGMII as long as it's "rgmii*" something), and the explicit
> {rx,tx}-internal-delay-ps properties are ignored by old kernels, so the
> change works both ways.
>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
--
Florian

\
 
 \ /
  Last update: 2021-10-15 19:37    [W:0.106 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site