lkml.org 
[lkml]   [2021]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/6] Devicetree fixes and additions for Kontron SL/BL i.MX8MM boards
Date
From: Frieder Schrempf <frieder.schrempf@kontron.de>

This is a set of enhancements and fixes for the devicetrees of the Kontron
SL/BL i.MX8MM SoMs and boards.

See the individual patches for more information and changelogs.

For v2, the review comments from Shawn ahve been taken into account
(thanks!) and the patches 7 and 8 have been dropped, as they were already
applied separately.

Frieder Schrempf (6):
arm64: dts: imx8mm-kontron: Add support for ultra high speed modes on
SD card
arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are
correct
arm64: dts: imx8mm-kontron: Set lower limit of VDD_SNVS to 800 mV
arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2
arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency
arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY

.../dts/freescale/imx8mm-kontron-n801x-s.dts | 36 ++++++++++++++++---
.../freescale/imx8mm-kontron-n801x-som.dtsi | 10 ++++--
2 files changed, 39 insertions(+), 7 deletions(-)

--
2.33.0

\
 
 \ /
  Last update: 2021-10-15 14:50    [W:0.157 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site