lkml.org 
[lkml]   [2021]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/6] media: aspeed: add dprintk for more detailed log control
From
Date
Dear Jammy,


Thank you for your reply.

Am 15.10.21 um 04:16 schrieb Jammy Huang:

> I will try to come out another patch which uses either
> v4l2_info/v4l2_err/v4l2_warn/v4l2_dbg
> or other 'native' Linux kernel solution.
>
> On 2021/10/14 下午 02:28, Paul Menzel wrote:
>> [Cc: +Steven, +Ingo for tracing questions]
>>
>> Dear Jammy,
>>
>>
>> Am 14.10.21 um 05:48 schrieb Jammy Huang:
>>> Add dprintk to categorize the log into NOTICE/INFO/TRACE/IRQ/REG.
>>> The on/off is controlled by module_param, debug.
>> Currently dev_dbg is dynamic debug, which can be controlled using the
>> Linux kernel command line or debugfs already?
>>
>>   From your patch:
>>
>>> +MODULE_PARM_DESC(debug, "set debugging level
>>> (0=reg,2=irq,4=trace,8=info(|-able)).");
>> What does (|-able) mean? Maybe give some examples in the commit message
>> as documentation?
> I will modify the description to make this more clear.
>>
>> Lastly, instead of parameter name `debug`, I’d use `log_level`, which
>> would be more accurate.
> Your consideration is understood, but please refer to the following 2
> cases:
>
> 1. "include/media/v4l2-common.h"
>
>  70 #define v4l2_dbg(level, debug, dev, fmt, arg...)                        \
>  71         do {                                                            \
>  72                 if (debug >= (level))                                   \
>  73                         v4l2_printk(KERN_DEBUG, dev, fmt , ## arg);     \
>  74         } while (0)

Searching for `v4l2_dbg` in `drivers/media` that seems to quite commonly
used, though certain drivers also use their own debugging facility.

> 2. "drivers/media/platform/vivid/vivid-core.c"
>
> 135 unsigned vivid_debug;
> 136 module_param(vivid_debug, uint, 0644);
> 137 MODULE_PARM_DESC(vivid_debug, " activates debug info");

That seems to be used like a boolean, and dynamic debug could replace it?

>> Why is more granularity needed/useful, and not just debug and non-debug,
>> where the existing Linux kernel levels `pr_info`, `pr_warn`, … are used?
>> Looking at the amount of log messages, the granularity does not look
>> needed.
>
> As you said, there isn't large amount of log messages currently. But
> during the development of the aspeed-jpeg support, the amount of log
> increased. That is why I want to add this log control. Besides, the
> log of reg-access, aspeed_video_read/aspeed_video_write/
> aspeed_video_update,is too noisy.

I would have thought that it’s easily selectable by using tools like
grep. No idea, if the log messages are only going to be used by
developers, or also for normal users.

Each driver seems to define their own parameter, and it often not
(userfriendly) documented, what the values mean. (Your patch does
document it.)

From `drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c`:

static int debug;
module_param(debug, int, 0644);

I guess, I was mostly confused by the info level, and would move that
outside the debugging, or rename it, so it’s more clear.

As written, for developers, tracing using ftrace could be a solution
too, but probably not for normal users.

Anyway, I just wanted to provide a user level view. If the maintainers
are fine with it, the current solution is also good.


Kind regards,

Paul


>>> Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
>>> ---
>>>    drivers/media/platform/aspeed-video.c | 73 ++++++++++++++++++++++-----
>>>    1 file changed, 60 insertions(+), 13 deletions(-)
>>>
>>> diff --git a/drivers/media/platform/aspeed-video.c
>>> b/drivers/media/platform/aspeed-video.c
>>> index 6259cf17a7cc..7b8129b0ca5f 100644
>>> --- a/drivers/media/platform/aspeed-video.c
>>> +++ b/drivers/media/platform/aspeed-video.c
>>> @@ -31,6 +31,19 @@
>>>    #include <media/v4l2-ioctl.h>
>>>    #include <media/videobuf2-dma-contig.h>
>>> +
>>> +#define LOG_REG        BIT(4)
>>> +#define LOG_DEBUG    BIT(3)
>>> +#define LOG_TRACE    BIT(2)
>> Could ftrace be used for this? It looks like there are static functions.
>> No idea, if there is already a “native” Linux kernel solution for this.
>>
>>> +#define LOG_INFO    BIT(1)
>>> +#define LOG_NOTICE    BIT(0)
>>> +
>>> +#define dprintk(level, fmt, arg...) do {                    \
>>> +    if (debug & level)                            \
>>> +        pr_debug(pr_fmt("[%s]: " fmt), DEVICE_NAME, ##arg);        \
>>> +} while (0)
>>> +
>>> +
>>>    #define DEVICE_NAME            "aspeed-video"
>>>    #define ASPEED_VIDEO_JPEG_NUM_QUALITIES    12
>>> @@ -390,6 +403,8 @@ static const struct v4l2_dv_timings_cap
>>> aspeed_video_timings_cap = {
>>>        },
>>>    };
>>> +static unsigned int debug;
>>> +
>>>    static void aspeed_video_init_jpeg_table(u32 *table, bool yuv420)
>>>    {
>>>        int i;
>>> @@ -437,7 +452,7 @@ static void aspeed_video_update(struct
>>> aspeed_video *video, u32 reg, u32 clear,
>>>        t &= ~clear;
>>>        t |= bits;
>>>        writel(t, video->base + reg);
>>> -    dev_dbg(video->dev, "update %03x[%08x -> %08x]\n", reg, before,
>>> +    dprintk(LOG_REG, "update %03x[%08x -> %08x]\n", reg, before,
>>>            readl(video->base + reg));
>>>    }
>>> @@ -445,14 +460,14 @@ static u32 aspeed_video_read(struct
>>> aspeed_video *video, u32 reg)
>>>    {
>>>        u32 t = readl(video->base + reg);
>>> -    dev_dbg(video->dev, "read %03x[%08x]\n", reg, t);
>>> +    dprintk(LOG_REG, "read %03x[%08x]\n", reg, t);
>>>        return t;
>>>    }
>>>    static void aspeed_video_write(struct aspeed_video *video, u32
>>> reg, u32 val)
>>>    {
>>>        writel(val, video->base + reg);
>>> -    dev_dbg(video->dev, "write %03x[%08x]\n", reg,
>>> +    dprintk(LOG_REG, "write %03x[%08x]\n", reg,
>>>            readl(video->base + reg));
>>>    }
>>> @@ -474,13 +489,13 @@ static int aspeed_video_start_frame(struct
>>> aspeed_video *video)
>>>        u32 seq_ctrl = aspeed_video_read(video, VE_SEQ_CTRL);
>>>        if (video->v4l2_input_status) {
>>> -        dev_dbg(video->dev, "No signal; don't start frame\n");
>>> +        dprintk(LOG_NOTICE, "No signal; don't start frame\n");
>>>            return 0;
>>>        }
>>>        if (!(seq_ctrl & VE_SEQ_CTRL_COMP_BUSY) ||
>>>            !(seq_ctrl & VE_SEQ_CTRL_CAP_BUSY)) {
>>> -        dev_dbg(video->dev, "Engine busy; don't start frame\n");
>>> +        dprintk(LOG_NOTICE, "Engine busy; don't start frame\n");
>>>            return -EBUSY;
>>>        }
>>> @@ -489,7 +504,7 @@ static int aspeed_video_start_frame(struct
>>> aspeed_video *video)
>>>                           struct aspeed_video_buffer, link);
>>>        if (!buf) {
>>>            spin_unlock_irqrestore(&video->lock, flags);
>>> -        dev_dbg(video->dev, "No buffers; don't start frame\n");
>>> +        dprintk(LOG_NOTICE, "No buffers; don't start frame\n");
>>>            return -EPROTO;
>>>        }
>>> @@ -565,7 +580,7 @@ static void aspeed_video_bufs_done(struct
>>> aspeed_video *video,
>>>    static void aspeed_video_irq_res_change(struct aspeed_video
>>> *video, ulong delay)
>>>    {
>>> -    dev_dbg(video->dev, "Resolution changed; resetting\n");
>>> +    dprintk(LOG_INFO, "Resolution changed; resetting\n");
>>>        set_bit(VIDEO_RES_CHANGE, &video->flags);
>>>        clear_bit(VIDEO_FRAME_INPRG, &video->flags);
>>> @@ -590,6 +605,12 @@ static irqreturn_t aspeed_video_irq(int irq,
>>> void *arg)
>>>        struct aspeed_video *video = arg;
>>>        u32 sts = aspeed_video_read(video, VE_INTERRUPT_STATUS);
>>> +    dprintk(LOG_DEBUG, "irq sts=%#x %s%s%s%s\n", sts,
>>> +        sts & VE_INTERRUPT_MODE_DETECT_WD ? ", unlock" : "",
>>> +        sts & VE_INTERRUPT_MODE_DETECT ? ", lock" : "",
>>> +        sts & VE_INTERRUPT_CAPTURE_COMPLETE ? ", capture-done" : "",
>>> +        sts & VE_INTERRUPT_COMP_COMPLETE ? ", comp-done" : "");
>>> +
>> Please split adding new log messages out into a separate commit.
>>
>>>        /*
>>>         * Resolution changed or signal was lost; reset the engine and
>>>         * re-initialize
>>> @@ -766,7 +787,7 @@ static void
>>> aspeed_video_calc_compressed_size(struct aspeed_video *video,
>>>        aspeed_video_write(video, VE_STREAM_BUF_SIZE,
>>>                   compression_buffer_size_reg);
>>> -    dev_dbg(video->dev, "Max compressed size: %x\n",
>>> +    dprintk(LOG_INFO, "Max compressed size: %#x\n",
>>>            video->max_compressed_size);
>>>    }
>>> @@ -804,7 +825,7 @@ static void aspeed_video_get_resolution(struct
>>> aspeed_video *video)
>>>                                  res_check(video),
>>>                                  MODE_DETECT_TIMEOUT);
>>>            if (!rc) {
>>> -            dev_dbg(video->dev, "Timed out; first mode detect\n");
>>> +            dprintk(LOG_INFO, "Timed out; first mode detect\n");
>>>                clear_bit(VIDEO_RES_DETECT, &video->flags);
>>>                return;
>>>            }
>>> @@ -822,7 +843,7 @@ static void aspeed_video_get_resolution(struct
>>> aspeed_video *video)
>>>                                  MODE_DETECT_TIMEOUT);
>>>            clear_bit(VIDEO_RES_DETECT, &video->flags);
>>>            if (!rc) {
>>> -            dev_dbg(video->dev, "Timed out; second mode detect\n");
>>> +            dprintk(LOG_INFO, "Timed out; second mode detect\n");
>>>                return;
>>>            }
>>> @@ -856,7 +877,7 @@ static void aspeed_video_get_resolution(struct
>>> aspeed_video *video)
>>>        } while (invalid_resolution && (tries++ <
>>> INVALID_RESOLUTION_RETRIES));
>>>        if (invalid_resolution) {
>>> -        dev_dbg(video->dev, "Invalid resolution detected\n");
>>> +        dprintk(LOG_NOTICE, "Invalid resolution detected\n");
>>>            return;
>>>        }
>>> @@ -873,7 +894,7 @@ static void aspeed_video_get_resolution(struct
>>> aspeed_video *video)
>>>        aspeed_video_update(video, VE_SEQ_CTRL, 0,
>>>                    VE_SEQ_CTRL_AUTO_COMP | VE_SEQ_CTRL_EN_WATCHDOG);
>>> -    dev_dbg(video->dev, "Got resolution: %dx%d\n", det->width,
>>> +    dprintk(LOG_INFO, "Got resolution: %dx%d\n", det->width,
>>>            det->height);
>>>    }
>>> @@ -907,6 +928,7 @@ static void aspeed_video_set_resolution(struct
>>> aspeed_video *video)
>>>        /* Don't use direct mode below 1024 x 768 (irqs don't fire) */
>>>        if (size < DIRECT_FETCH_THRESHOLD) {
>>> +        dprintk(LOG_INFO, "Capture: Sync Mode\n");
>>>            aspeed_video_write(video, VE_TGS_0,
>>>                       FIELD_PREP(VE_TGS_FIRST,
>>>                              video->frame_left - 1) |
>>> @@ -918,6 +940,7 @@ static void aspeed_video_set_resolution(struct
>>> aspeed_video *video)
>>>                              video->frame_bottom + 1));
>>>            aspeed_video_update(video, VE_CTRL, 0, VE_CTRL_INT_DE);
>>>        } else {
>>> +        dprintk(LOG_INFO, "Capture: Direct Mode\n");
>>>            aspeed_video_update(video, VE_CTRL, 0, VE_CTRL_DIRECT_FETCH);
>>>        }
>>> @@ -934,6 +957,10 @@ static void aspeed_video_set_resolution(struct
>>> aspeed_video *video)
>>>            if (!aspeed_video_alloc_buf(video, &video->srcs[1], size))
>>>                goto err_mem;
>>> +        dprintk(LOG_INFO, "src buf0 addr(%#x) size(%d)\n",
>>> +            video->srcs[0].dma, video->srcs[0].size);
>>> +        dprintk(LOG_INFO, "src buf1 addr(%#x) size(%d)\n",
>>> +            video->srcs[1].dma, video->srcs[1].size);
>>>            aspeed_video_write(video, VE_SRC0_ADDR, video->srcs[0].dma);
>>>            aspeed_video_write(video, VE_SRC1_ADDR, video->srcs[1].dma);
>>>        }
>>> @@ -1010,6 +1037,8 @@ static void aspeed_video_start(struct
>>> aspeed_video *video)
>>>    static void aspeed_video_stop(struct aspeed_video *video)
>>>    {
>>> +    dprintk(LOG_TRACE, "%s\n", __func__);
>>> +
>>>        set_bit(VIDEO_STOPPED, &video->flags);
>>>        cancel_delayed_work_sync(&video->res_work);
>>> @@ -1198,6 +1227,9 @@ static int aspeed_video_set_dv_timings(struct
>>> file *file, void *fh,
>>>        timings->type = V4L2_DV_BT_656_1120;
>>> +    dprintk(LOG_INFO, "set new timings(%dx%d)\n", timings->bt.width,
>>> +        timings->bt.height);
>>> +
>>>        return 0;
>>>    }
>>> @@ -1362,6 +1394,8 @@ static void aspeed_video_resolution_work(struct
>>> work_struct *work)
>>>                              res_work);
>>>        u32 input_status = video->v4l2_input_status;
>>> +    dprintk(LOG_TRACE, "%s+\n", __func__);
>>> +
>>>        aspeed_video_on(video);
>>>        /* Exit early in case no clients remain */
>>> @@ -1380,6 +1414,7 @@ static void aspeed_video_resolution_work(struct
>>> work_struct *work)
>>>                .u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
>>>            };
>>> +        dprintk(LOG_INFO, "fire source change event\n");
>>>            v4l2_event_queue(&video->vdev, &ev);
>>>        } else if (test_bit(VIDEO_STREAMING, &video->flags)) {
>>>            /* No resolution change so just restart streaming */
>>> @@ -1389,6 +1424,8 @@ static void aspeed_video_resolution_work(struct
>>> work_struct *work)
>>>    done:
>>>        clear_bit(VIDEO_RES_CHANGE, &video->flags);
>>>        wake_up_interruptible_all(&video->wait);
>>> +
>>> +    dprintk(LOG_TRACE, "%s-\n", __func__);
>>>    }
>>>    static int aspeed_video_open(struct file *file)
>>> @@ -1476,6 +1513,7 @@ static int aspeed_video_start_streaming(struct
>>> vb2_queue *q,
>>>        int rc;
>>>        struct aspeed_video *video = vb2_get_drv_priv(q);
>>> +    dprintk(LOG_TRACE, "%s\n", __func__);
>>>        video->sequence = 0;
>>>        video->perf.duration_max = 0;
>>>        video->perf.duration_min = 0xffffffff;
>>> @@ -1495,13 +1533,15 @@ static void
>>> aspeed_video_stop_streaming(struct vb2_queue *q)
>>>        int rc;
>>>        struct aspeed_video *video = vb2_get_drv_priv(q);
>>> +    dprintk(LOG_TRACE, "%s+\n", __func__);
>>> +
>>>        clear_bit(VIDEO_STREAMING, &video->flags);
>>>        rc = wait_event_timeout(video->wait,
>>>                    !test_bit(VIDEO_FRAME_INPRG, &video->flags),
>>>                    STOP_TIMEOUT);
>>>        if (!rc) {
>>> -        dev_dbg(video->dev, "Timed out when stopping streaming\n");
>>> +        dprintk(LOG_NOTICE, "Timed out when stopping streaming\n");
>>>            /*
>>>             * Need to force stop any DMA and try and get HW into a good
>>> @@ -1516,6 +1556,7 @@ static void aspeed_video_stop_streaming(struct
>>> vb2_queue *q)
>>>        }
>>>        aspeed_video_bufs_done(video, VB2_BUF_STATE_ERROR);
>>> +    dprintk(LOG_TRACE, "%s-\n", __func__);
>>>    }
>>>    static void aspeed_video_buf_queue(struct vb2_buffer *vb)
>>> @@ -1715,6 +1756,7 @@ static int aspeed_video_init(struct
>>> aspeed_video *video)
>>>            dev_err(dev, "Unable to request IRQ %d\n", irq);
>>>            return rc;
>>>        }
>>> +    dev_info(video->dev, "irq %d\n", irq);
>>>        video->eclk = devm_clk_get(dev, "eclk");
>>>        if (IS_ERR(video->eclk)) {
>>> @@ -1751,6 +1793,8 @@ static int aspeed_video_init(struct
>>> aspeed_video *video)
>>>            rc = -ENOMEM;
>>>            goto err_release_reserved_mem;
>>>        }
>>> +    dev_info(video->dev, "alloc mem size(%d) at %#x for jpeg header\n",
>>> +         VE_JPEG_HEADER_SIZE, video->jpeg.dma);
>>>        aspeed_video_init_jpeg_table(video->jpeg.virt, video->yuv420);
>>> @@ -1856,6 +1900,9 @@ static struct platform_driver
>>> aspeed_video_driver = {
>>>    module_platform_driver(aspeed_video_driver);
>>> +module_param(debug, int, 0644);
>>> +MODULE_PARM_DESC(debug, "set debugging level
>>> (0=reg,2=irq,4=trace,8=info(|-able)).");
>>> +
>>>    MODULE_DESCRIPTION("ASPEED Video Engine Driver");
>>>    MODULE_AUTHOR("Eddie James");
>>>    MODULE_LICENSE("GPL v2");
>>
>> Kind regards,
>>
>> Paul

\
 
 \ /
  Last update: 2021-10-15 10:30    [W:0.071 / U:3.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site