lkml.org 
[lkml]   [2021]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/13] net: phy: Add qca8081 ethernet phy driver
Date
This patch series add the qca8081 ethernet phy driver support, which
improve the wol feature, leverage at803x phy driver and add the fast
retrain, master/slave seed and CDT feature.

Changes in v2:
* add definitions of fast retrain related registers in mdio.h.
* break up the patch into small patches.
* improve the at803x legacy code.

Changes in v1:
* merge qca8081 phy driver into at803x.
* add cdt feature.
* leverage at803x phy driver helpers.

Luo Jie (13):
net: phy: at803x: replace AT803X_DEVICE_ADDR with MDIO_MMD_PCS
net: phy: at803x: use phy_modify()
net: phy: at803x: improve the WOL feature
net: phy: at803x: use GENMASK() for speed status
net: phy: add qca8081 ethernet phy driver
net: phy: add qca8081 read_status
net: phy: add qca8081 get_features
net: phy: add qca8081 config_aneg
net: phy: add constants for fast retrain related register
net: phy: add qca8081 config_init
net: phy: add qca8081 soft_reset and enable master/slave seed
net: phy: adjust qca8081 master/slave seed value if link down
net: phy: add qca8081 cdt feature

drivers/net/phy/at803x.c | 572 +++++++++++++++++++++++++++++++++++---
include/uapi/linux/mdio.h | 10 +
2 files changed, 536 insertions(+), 46 deletions(-)

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2021-10-15 09:36    [W:0.108 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site