lkml.org 
[lkml]   [2021]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] clk: samsung: describe drivers in KConfig
From
Date
On 21. 9. 24. 오후 10:36, Krzysztof Kozlowski wrote:
> Describe better which driver applies to which SoC, to make configuring
> kernel for Samsung SoC easier.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> ---
> drivers/clk/samsung/Kconfig | 30 ++++++++++++++++++++----------
> 1 file changed, 20 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/clk/samsung/Kconfig b/drivers/clk/samsung/Kconfig
> index 0441c4f73ac9..0e18d6ff2916 100644
> --- a/drivers/clk/samsung/Kconfig
> +++ b/drivers/clk/samsung/Kconfig
> @@ -67,7 +67,8 @@ config EXYNOS_5420_COMMON_CLK
> depends on COMMON_CLK_SAMSUNG
> help
> Support for the clock controller present on the Samsung
> - Exynos5420 SoCs. Choose Y here only if you build for this SoC.
> + Exynos5420/Exynos5422/Exynos5800 SoCs. Choose Y here only if you
> + build for this SoC.
>
> config EXYNOS_ARM64_COMMON_CLK
> bool "Samsung Exynos ARMv8-family clock controller support" if COMPILE_TEST
> @@ -79,38 +80,47 @@ config EXYNOS_AUDSS_CLK_CON
> default y if ARCH_EXYNOS
> help
> Support for the Audio Subsystem CLKCON clock controller present
> - on some Exynos SoC variants. Choose M or Y here if you want to
> - use audio devices such as I2S, PCM, etc.
> + on some Samsung Exynos SoC variants. Choose M or Y here if you want
> + to use audio devices such as I2S, PCM, etc.
>
> config EXYNOS_CLKOUT
> tristate "Samsung Exynos clock output driver"
> depends on COMMON_CLK_SAMSUNG
> default y if ARCH_EXYNOS
> help
> - Support for the clock output (XCLKOUT) present on some of Exynos SoC
> - variants. Usually the XCLKOUT is used to monitor the status of the
> - certains clocks from SoC, but it could also be tied to other devices
> - as an input clock.
> + Support for the clock output (XCLKOUT) present on some of Samsung
> + Exynos SoC variants. Usually the XCLKOUT is used to monitor the
> + status of the certains clocks from SoC, but it could also be tied to
> + other devices as an input clock.
>
> # For S3C24XX platforms, select following symbols:
> config S3C2410_COMMON_CLK
> bool "Samsung S3C2410 clock controller support" if COMPILE_TEST
> select COMMON_CLK_SAMSUNG
> help
> - Build the s3c2410 clock driver based on the common clock framework.
> + Support for the clock controller present on the Samsung
> + S3C2410/S3C2440/S3C2442 SoCs. Choose Y here only if you build for
> + this SoC.
>
> config S3C2410_COMMON_DCLK
> bool
> select COMMON_CLK_SAMSUNG
> select REGMAP_MMIO
> help
> - Temporary symbol to build the dclk driver based on the common clock
> - framework.
> + Support for the dclk clock controller present on the Samsung
> + S3C2410/S3C2412/S3C2440/S3C2443 SoCs. Choose Y here only if you build
> + for this SoC.
>
> config S3C2412_COMMON_CLK
> bool "Samsung S3C2412 clock controller support" if COMPILE_TEST
> select COMMON_CLK_SAMSUNG
> + help
> + Support for the clock controller present on the Samsung S3C2412 SoCs.
> + Choose Y here only if you build for this SoC.
>
> config S3C2443_COMMON_CLK
> bool "Samsung S3C2443 clock controller support" if COMPILE_TEST
> select COMMON_CLK_SAMSUNG
> + help
> + Support for the clock controller present on the Samsung
> + S3C2416/S3C2443 SoCs. Choose Y here only if you build for this SoC.
>

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>

--
Best Regards,
Samsung Electronics
Chanwoo Choi

\
 
 \ /
  Last update: 2021-10-16 01:27    [W:1.532 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site