lkml.org 
[lkml]   [2021]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 6/6] drm/meson: encoder_cvbs: switch to bridge with ATTACH_NO_CONNECTOR
Hi Neil, Hi Sam,

On Fri, Oct 15, 2021 at 4:11 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
[...]
> +static const struct drm_bridge_funcs meson_encoder_cvbs_bridge_funcs = {
> + .attach = meson_encoder_cvbs_attach,
> + .enable = meson_encoder_cvbs_enable,
> + .disable = meson_encoder_cvbs_disable,
> + .mode_valid = meson_encoder_cvbs_mode_valid,
> + .get_modes = meson_encoder_cvbs_get_modes,
> + .atomic_enable = meson_encoder_cvbs_atomic_enable,
I did some testing on boards where u-boot doesn't initialize the video outputs.
It seems that meson_encoder_cvbs_enable() is never called with this patch.
meson_encoder_cvbs_atomic_enable() is called though.

From what I can see in drm_bridge.c [0] this is even expected.
Does this mean that we need to move all logic from .enable to
.atomic_enable (and same with .disable -> moving that logic to
.atomic_disable)?

The same comment applies to the HDMI patch.


Best regards,
Martin


[0] https://elixir.bootlin.com/linux/v5.15-rc5/source/drivers/gpu/drm/drm_bridge.c#L717

\
 
 \ /
  Last update: 2021-10-16 00:37    [W:0.138 / U:0.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site