lkml.org 
[lkml]   [2021]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RESEND v2 4/5] PCI: imx6: Fix the clock reference handling unbalance when link never came up
On Fri, Oct 15, 2021 at 02:05:40PM +0800, Richard Zhu wrote:
> When link never came up, driver probe would be failed with error -110.
> To keep usage counter balance of the clocks, disable the previous
> enabled clocks when link is down.
> Move definitions of the imx6_pcie_clk_disable() function to the proper
> place. Because it wouldn't be used in imx6_pcie_suspend_noirq() only.

Add blank line between paragraphs.

Can you please split this into two patches:

1) the imx6_pcie_clk_disable() move
2) the actual fix

It's hard to tell exactly where the fix is when things are mixed
together.

> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
> drivers/pci/controller/dwc/pci-imx6.c | 47 ++++++++++++++-------------
> 1 file changed, 24 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index cc837f8bf6d4..d6a5d99ffa52 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -514,6 +514,29 @@ static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie)
> return ret;
> }
>
> +static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
> +{
> + clk_disable_unprepare(imx6_pcie->pcie);
> + clk_disable_unprepare(imx6_pcie->pcie_phy);
> + clk_disable_unprepare(imx6_pcie->pcie_bus);
> +
> + switch (imx6_pcie->drvdata->variant) {
> + case IMX6SX:
> + clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
> + break;
> + case IMX7D:
> + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> + IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> + IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> + break;
> + case IMX8MQ:
> + clk_disable_unprepare(imx6_pcie->pcie_aux);
> + break;
> + default:
> + break;
> + }
> +}
> +
> static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
> {
> u32 val;
> @@ -853,6 +876,7 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
> dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
> dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
> imx6_pcie_reset_phy(imx6_pcie);
> + imx6_pcie_clk_disable(imx6_pcie);
> if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0)
> regulator_disable(imx6_pcie->vpcie);
> return ret;
> @@ -941,29 +965,6 @@ static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
> usleep_range(1000, 10000);
> }
>
> -static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
> -{
> - clk_disable_unprepare(imx6_pcie->pcie);
> - clk_disable_unprepare(imx6_pcie->pcie_phy);
> - clk_disable_unprepare(imx6_pcie->pcie_bus);
> -
> - switch (imx6_pcie->drvdata->variant) {
> - case IMX6SX:
> - clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
> - break;
> - case IMX7D:
> - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> - IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> - IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> - break;
> - case IMX8MQ:
> - clk_disable_unprepare(imx6_pcie->pcie_aux);
> - break;
> - default:
> - break;
> - }
> -}
> -
> static int imx6_pcie_suspend_noirq(struct device *dev)
> {
> struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2021-10-15 20:51    [W:0.229 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site