lkml.org 
[lkml]   [2021]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 0/4] arm64: dts: qcom: sdm845: Add thermal zones for PM8998 ADC
From
Date

Hi,

I will pick patches 1 et 2

Thanks

-- Daniel


On 05/10/2021 05:25, Bjorn Andersson wrote:
> Describe ADC channels, related thermal monitor channels and add thermal
> zones for these.
>
> Bjorn Andersson (4):
> dt-bindings: thermal: qcom: add HC variant of adc-thermal monitor
> bindings
> thermal/drivers/qcom/spmi-adc-tm5: Add support for HC variant
> arm64: dts: qcom: pm8998: Add ADC Thermal Monitor node
> arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones
>
> .../bindings/thermal/qcom-spmi-adc-tm-hc.yaml | 149 ++++++++++++++++++
> arch/arm64/boot/dts/qcom/pm8998.dtsi | 10 ++
> arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 140 ++++++++++++++++
> drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 41 ++++-
> 4 files changed, 339 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml
>


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2021-10-15 09:12    [W:0.082 / U:2.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site