lkml.org 
[lkml]   [2021]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2 07/12] virtio-pci: harden INTX interrupts
On Thu, Oct 14, 2021 at 10:35:48AM +0800, Jason Wang wrote:
> On Wed, Oct 13, 2021 at 5:42 PM Michael S. Tsirkin <mst@redhat.com> wrote:
> >
> > On Tue, Oct 12, 2021 at 02:52:22PM +0800, Jason Wang wrote:
> > > This patch tries to make sure the virtio interrupt handler for INTX
> > > won't be called after a reset and before virtio_device_ready(). We
> > > can't use IRQF_NO_AUTOEN since we're using shared interrupt
> > > (IRQF_SHARED). So this patch tracks the INTX enabling status in a new
> > > intx_soft_enabled variable and toggle it during in
> > > vp_disable/enable_vectors(). The INTX interrupt handler will check
> > > intx_soft_enabled before processing the actual interrupt.
> > >
> > > Cc: Boqun Feng <boqun.feng@gmail.com>
> > > Cc: Thomas Gleixner <tglx@linutronix.de>
> > > Cc: Peter Zijlstra <peterz@infradead.org>
> > > Cc: Paul E. McKenney <paulmck@kernel.org>
> > > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > > ---
> > > drivers/virtio/virtio_pci_common.c | 24 ++++++++++++++++++++++--
> > > drivers/virtio/virtio_pci_common.h | 1 +
> > > 2 files changed, 23 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/virtio/virtio_pci_common.c b/drivers/virtio/virtio_pci_common.c
> > > index 0b9523e6dd39..5ae6a2a4eb77 100644
> > > --- a/drivers/virtio/virtio_pci_common.c
> > > +++ b/drivers/virtio/virtio_pci_common.c
> > > @@ -30,8 +30,16 @@ void vp_disable_vectors(struct virtio_device *vdev)
> > > struct virtio_pci_device *vp_dev = to_vp_device(vdev);
> > > int i;
> > >
> > > - if (vp_dev->intx_enabled)
> > > + if (vp_dev->intx_enabled) {
> > > + /*
> > > + * The below synchronize() guarantees that any
> > > + * interrupt for this line arriving after
> > > + * synchronize_irq() has completed is guaranteed to see
> > > + * intx_soft_enabled == false.
> > > + */
> > > + WRITE_ONCE(vp_dev->intx_soft_enabled, false);
> > > synchronize_irq(vp_dev->pci_dev->irq);
> > > + }
> > >
> > > for (i = 0; i < vp_dev->msix_vectors; ++i)
> > > disable_irq(pci_irq_vector(vp_dev->pci_dev, i));
> > > @@ -43,8 +51,16 @@ void vp_enable_vectors(struct virtio_device *vdev)
> > > struct virtio_pci_device *vp_dev = to_vp_device(vdev);
> > > int i;
> > >
> > > - if (vp_dev->intx_enabled)
> > > + if (vp_dev->intx_enabled) {
> > > + disable_irq(vp_dev->pci_dev->irq);
> > > + /*
> > > + * The above disable_irq() provides TSO ordering and
> > > + * as such promotes the below store to store-release.
> > > + */
> > > + WRITE_ONCE(vp_dev->intx_soft_enabled, true);
> > > + enable_irq(vp_dev->pci_dev->irq);
> > > return;
> > > + }
> > >
> > > for (i = 0; i < vp_dev->msix_vectors; ++i)
> > > enable_irq(pci_irq_vector(vp_dev->pci_dev, i));
> > > @@ -97,6 +113,10 @@ static irqreturn_t vp_interrupt(int irq, void *opaque)
> > > struct virtio_pci_device *vp_dev = opaque;
> > > u8 isr;
> > >
> > > + /* read intx_soft_enabled before read others */
> > > + if (!smp_load_acquire(&vp_dev->intx_soft_enabled))
> > > + return IRQ_NONE;
> > > +
> > > /* reading the ISR has the effect of also clearing it so it's very
> > > * important to save off the value. */
> > > isr = ioread8(vp_dev->isr);
> >
> > I don't see why we need this ordering guarantee here.
> >
> > synchronize_irq above makes sure no interrupt handler
> > is in progress.
>
> Yes.
>
> > the handler itself thus does not need
> > any specific order, it is ok if intx_soft_enabled is read
> > after, not before the rest of it.
>
> But the interrupt could be raised after synchronize_irq() which may
> see a false of the intx_soft_enabled.

You mean a "true" value right? false is what we are writing there.

Are you sure it can happen? I think that synchronize_irq makes the value
visible on all CPUs running the irq.

> In this case we still need the
> make sure intx_soft_enbled to be read first instead of allowing other
> operations to be done first, otherwise the intx_soft_enabled is
> meaningless.
>
> Thanks

If intx_soft_enbled were not visible after synchronize_irq then
it does not matter in which order we read it wrt other values,
it still wouldn't work right.

> >
> > Just READ_ONCE should be enough, and we can drop the comment.
> >
> >
> > > diff --git a/drivers/virtio/virtio_pci_common.h b/drivers/virtio/virtio_pci_common.h
> > > index a235ce9ff6a5..3c06e0f92ee4 100644
> > > --- a/drivers/virtio/virtio_pci_common.h
> > > +++ b/drivers/virtio/virtio_pci_common.h
> > > @@ -64,6 +64,7 @@ struct virtio_pci_device {
> > > /* MSI-X support */
> > > int msix_enabled;
> > > int intx_enabled;
> > > + bool intx_soft_enabled;
> > > cpumask_var_t *msix_affinity_masks;
> > > /* Name strings for interrupts. This size should be enough,
> > > * and I'm too lazy to allocate each name separately. */
> > > --
> > > 2.25.1
> >

\
 
 \ /
  Last update: 2021-10-14 07:50    [W:0.071 / U:7.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site