lkml.org 
[lkml]   [2021]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 3/5] PCI/switchtec: Update the way of getting management VEP instance ID
    Date
    From: Kelvin Cao <kelvin.cao@microchip.com>

    Gen4 firmware adds DMA VEP and NVMe VEP support in VEP (virtual EP)
    instance ID register in addtion to management EP, update the way of
    getting management VEP instance ID.

    Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com>
    ---
    drivers/pci/switch/switchtec.c | 6 +++---
    1 file changed, 3 insertions(+), 3 deletions(-)

    diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c
    index 5c300ff3921d..97a93c9b4629 100644
    --- a/drivers/pci/switch/switchtec.c
    +++ b/drivers/pci/switch/switchtec.c
    @@ -1133,7 +1133,7 @@ static int ioctl_pff_to_port(struct switchtec_dev *stdev,
    break;
    }

    - reg = ioread32(&pcfg->vep_pff_inst_id);
    + reg = ioread32(&pcfg->vep_pff_inst_id) & 0xFF;
    if (reg == p.pff) {
    p.port = SWITCHTEC_IOCTL_PFF_VEP;
    break;
    @@ -1179,7 +1179,7 @@ static int ioctl_port_to_pff(struct switchtec_dev *stdev,
    p.pff = ioread32(&pcfg->usp_pff_inst_id);
    break;
    case SWITCHTEC_IOCTL_PFF_VEP:
    - p.pff = ioread32(&pcfg->vep_pff_inst_id);
    + p.pff = ioread32(&pcfg->vep_pff_inst_id) & 0xFF;
    break;
    default:
    if (p.port > ARRAY_SIZE(pcfg->dsp_pff_inst_id))
    @@ -1553,7 +1553,7 @@ static void init_pff(struct switchtec_dev *stdev)
    if (reg < stdev->pff_csr_count)
    stdev->pff_local[reg] = 1;

    - reg = ioread32(&pcfg->vep_pff_inst_id);
    + reg = ioread32(&pcfg->vep_pff_inst_id) & 0xFF;
    if (reg < stdev->pff_csr_count)
    stdev->pff_local[reg] = 1;

    --
    2.25.1
    \
     
     \ /
      Last update: 2021-10-14 09:27    [W:2.425 / U:0.204 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site