lkml.org 
[lkml]   [2021]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH v2 1/2] PCI: MCFG: Consolidate the separate PCI MCFG table entry list
From
Hi Lorenzo,

Thanks for your kindly feedback :)

On 13/10/2021 18:44, Lorenzo Pieralisi wrote:
> On Fri, Oct 08, 2021 at 04:31:43PM -0500, Bjorn Helgaas wrote:
>> [+cc Jayachandran, Tomasz; not sure if they're still around, but just
>> in case they have a comment on any reasons for keeping the
>> pci_mcfg_list list separate.]
>>
>> On Fri, Oct 08, 2021 at 04:40:12PM +0800, Xuesong Chen wrote:
>>> The PCI MCFG entry list is discrete on x86 and other architectures like
>>> arm64 in current implementation, this list variable can be consolidated
>>> for unnecessary duplication and other purposes, for example, we can remove
>>> some of the 'arch' specific codes in the APEI/EINJ module and re-implement
>>> it in a more common arch-agnostic way.
>>
>> This commit log could be more explicit about what's going on here.
>>
>> From deciphering the patch, I think it takes advantage of the fact
>> that struct pci_mmcfg_region and struct mcfg_entry contain basically
>> the same information, but pci_mmcfg_region contains a little extra
>> information (a struct resource, a virtual address, and a name).
>>
>> To reduce the redundancy, it:
>>
>> - Moves the "struct pci_mmcfg_region" definition from
>> arch/x86/include/asm/pci_x86.h to include/linux/pci.h, where it
>> can be shared across arches.
>>
>> - Moves pci_mmcfg_list (a list of pci_mmcfg_region structs) from
>> arch/x86/pci/mmconfig-shared.c to drivers/pci/pci.c, where it can
>> be shared across arches.
>
> This is a bit ugly, especially the resulting ifdef CONFIG_PCI in
> patch 2:
>
> https://lore.kernel.org/linux-acpi/YWAEG7fyFC+lhwd+@Dennis-MBP.local
>
> I'd rather make apei_filter_mcfg_addr() conditional, on what, that's
> the question.
>
> #ifdef CONFIG_FOO
> static int apei_filter_mcfg_addr()
> {
> ...
> }
> #else
> static inline int apei_filter_mcfg_addr() { return 0; }
> #endif
>

How about below change in patch 2 to make it not as such a bit ugly:

#ifdef CONFIG_PCI
static int apei_filter_mcfg_addr()
{
...
}
#else
static inline int apei_filter_mcfg_addr() { return 0; }
#endif

I'd like to update it in the next version if it's OK...

>> - On x86 (which does not enable CONFIG_ACPI_MCFG), pci_mmcfg_list is
>> built in arch/x86/pci/mmconfig-shared.c as before.
>>
>> - Removes the "struct mcfg_entry" from drivers/acpi/pci_mcfg.c.
>>
>> - Replaces pci_mcfg_list (previously a list of mcfg_entry structs)
>> in drivers/acpi/pci_mcfg.c with the newly-shared pci_mmcfg_list (a
>> list of pci_mmcfg_region structs).
>>
>> - On ARM64 (which does enable CONFIG_ACPI_MCFG), pci_mmcfg_list is
>> built in drivers/acpi/pci_mcfg.c.
>>
>> Does that sound about right?
>
> Yes it does. Another option would consist in doing all the MCFG parsing
> (anew) in APEI code to build a temporary list that is discarded as soon
> as the resource filtering took place - maybe it is something worth
> thinking about (but do we really need more MCFG parsing code ?).

IIRC, currently both x86 MMCONFIG and ACPI MCFG has its own MCFG parsing code,
so adding another new MCFG parsing code maybe not a good idea.

Thanks,
Xuesong

>
> Lorenzo
>
>>> Signed-off-by: Xuesong Chen <xuesong.chen@linux.alibaba.com>
>>> ---
>>> arch/x86/include/asm/pci_x86.h | 17 +----------------
>>> arch/x86/pci/mmconfig-shared.c | 2 --
>>> drivers/acpi/pci_mcfg.c | 34 +++++++++++++---------------------
>>> drivers/pci/pci.c | 2 ++
>>> include/linux/pci.h | 17 +++++++++++++++++
>>> 5 files changed, 33 insertions(+), 39 deletions(-)
>>>
>>> diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
>>> index 490411d..1f4257c 100644
>>> --- a/arch/x86/include/asm/pci_x86.h
>>> +++ b/arch/x86/include/asm/pci_x86.h
>>> @@ -146,20 +146,7 @@ static inline int __init pci_acpi_init(void)
>>> extern void pcibios_fixup_irqs(void);
>>>
>>> /* pci-mmconfig.c */
>>> -
>>> -/* "PCI MMCONFIG %04x [bus %02x-%02x]" */
>>> -#define PCI_MMCFG_RESOURCE_NAME_LEN (22 + 4 + 2 + 2)
>>> -
>>> -struct pci_mmcfg_region {
>>> - struct list_head list;
>>> - struct resource res;
>>> - u64 address;
>>> - char __iomem *virt;
>>> - u16 segment;
>>> - u8 start_bus;
>>> - u8 end_bus;
>>> - char name[PCI_MMCFG_RESOURCE_NAME_LEN];
>>> -};
>>> +struct pci_mmcfg_region;
>>>
>>> extern int __init pci_mmcfg_arch_init(void);
>>> extern void __init pci_mmcfg_arch_free(void);
>>> @@ -174,8 +161,6 @@ extern struct pci_mmcfg_region *__init pci_mmconfig_add(int segment, int start,
>>>
>>> extern struct list_head pci_mmcfg_list;
>>>
>>> -#define PCI_MMCFG_BUS_OFFSET(bus) ((bus) << 20)
>>> -
>>> /*
>>> * On AMD Fam10h CPUs, all PCI MMIO configuration space accesses must use
>>> * %eax. No other source or target registers may be used. The following
>>> diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
>>> index 758cbfe..0b961fe6 100644
>>> --- a/arch/x86/pci/mmconfig-shared.c
>>> +++ b/arch/x86/pci/mmconfig-shared.c
>>> @@ -31,8 +31,6 @@
>>> static DEFINE_MUTEX(pci_mmcfg_lock);
>>> #define pci_mmcfg_lock_held() lock_is_held(&(pci_mmcfg_lock).dep_map)
>>>
>>> -LIST_HEAD(pci_mmcfg_list);
>>> -
>>> static void __init pci_mmconfig_remove(struct pci_mmcfg_region *cfg)
>>> {
>>> if (cfg->res.parent)
>>> diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
>>> index 53cab97..d9506b0 100644
>>> --- a/drivers/acpi/pci_mcfg.c
>>> +++ b/drivers/acpi/pci_mcfg.c
>>> @@ -13,14 +13,7 @@
>>> #include <linux/pci-acpi.h>
>>> #include <linux/pci-ecam.h>
>>>
>>> -/* Structure to hold entries from the MCFG table */
>>> -struct mcfg_entry {
>>> - struct list_head list;
>>> - phys_addr_t addr;
>>> - u16 segment;
>>> - u8 bus_start;
>>> - u8 bus_end;
>>> -};
>>> +extern struct list_head pci_mmcfg_list;
>>>
>>> #ifdef CONFIG_PCI_QUIRKS
>>> struct mcfg_fixup {
>>> @@ -214,16 +207,13 @@ static void pci_mcfg_apply_quirks(struct acpi_pci_root *root,
>>> #endif
>>> }
>>>
>>> -/* List to save MCFG entries */
>>> -static LIST_HEAD(pci_mcfg_list);
>>> -
>>> int pci_mcfg_lookup(struct acpi_pci_root *root, struct resource *cfgres,
>>> const struct pci_ecam_ops **ecam_ops)
>>> {
>>> const struct pci_ecam_ops *ops = &pci_generic_ecam_ops;
>>> struct resource *bus_res = &root->secondary;
>>> u16 seg = root->segment;
>>> - struct mcfg_entry *e;
>>> + struct pci_mmcfg_region *e;
>>> struct resource res;
>>>
>>> /* Use address from _CBA if present, otherwise lookup MCFG */
>>> @@ -233,10 +223,10 @@ int pci_mcfg_lookup(struct acpi_pci_root *root, struct resource *cfgres,
>>> /*
>>> * We expect the range in bus_res in the coverage of MCFG bus range.
>>> */
>>> - list_for_each_entry(e, &pci_mcfg_list, list) {
>>> - if (e->segment == seg && e->bus_start <= bus_res->start &&
>>> - e->bus_end >= bus_res->end) {
>>> - root->mcfg_addr = e->addr;
>>> + list_for_each_entry(e, &pci_mmcfg_list, list) {
>>> + if (e->segment == seg && e->start_bus <= bus_res->start &&
>>> + e->end_bus >= bus_res->end) {
>>> + root->mcfg_addr = e->address;
>>> }
>>>
>>> }
>>> @@ -268,7 +258,7 @@ static __init int pci_mcfg_parse(struct acpi_table_header *header)
>>> {
>>> struct acpi_table_mcfg *mcfg;
>>> struct acpi_mcfg_allocation *mptr;
>>> - struct mcfg_entry *e, *arr;
>>> + struct pci_mmcfg_region *e, *arr;
>>> int i, n;
>>>
>>> if (header->length < sizeof(struct acpi_table_mcfg))
>>> @@ -285,10 +275,12 @@ static __init int pci_mcfg_parse(struct acpi_table_header *header)
>>>
>>> for (i = 0, e = arr; i < n; i++, mptr++, e++) {
>>> e->segment = mptr->pci_segment;
>>> - e->addr = mptr->address;
>>> - e->bus_start = mptr->start_bus_number;
>>> - e->bus_end = mptr->end_bus_number;
>>> - list_add(&e->list, &pci_mcfg_list);
>>> + e->address = mptr->address;
>>> + e->start_bus = mptr->start_bus_number;
>>> + e->end_bus = mptr->end_bus_number;
>>> + e->res.start = e->address + PCI_MMCFG_BUS_OFFSET(e->start_bus);
>>> + e->res.end = e->address + PCI_MMCFG_BUS_OFFSET(e->end_bus + 1) - 1;
>>> + list_add(&e->list, &pci_mmcfg_list);
>>> }
>>>
>>> #ifdef CONFIG_PCI_QUIRKS
>>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>>> index ce2ab62..899004e 100644
>>> --- a/drivers/pci/pci.c
>>> +++ b/drivers/pci/pci.c
>>> @@ -47,6 +47,8 @@
>>> int pci_pci_problems;
>>> EXPORT_SYMBOL(pci_pci_problems);
>>>
>>> +LIST_HEAD(pci_mmcfg_list);
>>> +
>>> unsigned int pci_pm_d3hot_delay;
>>>
>>> static void pci_pme_list_scan(struct work_struct *work);
>>> diff --git a/include/linux/pci.h b/include/linux/pci.h
>>> index cd8aa6f..71e4c06 100644
>>> --- a/include/linux/pci.h
>>> +++ b/include/linux/pci.h
>>> @@ -55,6 +55,23 @@
>>> #define PCI_RESET_PROBE true
>>> #define PCI_RESET_DO_RESET false
>>>
>>> +#define PCI_MMCFG_BUS_OFFSET(bus) ((bus) << 20)
>>> +
>>> +/* "PCI MMCONFIG %04x [bus %02x-%02x]" */
>>> +#define PCI_MMCFG_RESOURCE_NAME_LEN (22 + 4 + 2 + 2)
>>> +
>>> +/* pci mcfg region */
>>> +struct pci_mmcfg_region {
>>> + struct list_head list;
>>> + struct resource res;
>>> + u64 address;
>>> + char __iomem *virt;
>>> + u16 segment;
>>> + u8 start_bus;
>>> + u8 end_bus;
>>> + char name[PCI_MMCFG_RESOURCE_NAME_LEN];
>>> +};
>>> +
>>> /*
>>> * The PCI interface treats multi-function devices as independent
>>> * devices. The slot/function address of each device is encoded
>>> --
>>> 1.8.3.1
>>>

\
 
 \ /
  Last update: 2021-10-13 14:25    [W:0.063 / U:1.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site