lkml.org 
[lkml]   [2021]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 03/20] arm64/dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
Date
'iface_clk' clock is not used by the
qcom, bam_dma driver, so remove the same from 'ipq6018' dts.

This is a preparatory patch for subsequent patch in
this series which converts the qcom_bam_dma device-tree
binding into YAML format.

Without this change, 'make dtbs_check' leads to the following
error:
$ arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml:
dma-controller@7984000: clock-names: ['iface_clk', 'bam_clk']
is too long

Fix the same.

Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 6a05ee82547f..55c961b5f1ab 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -346,9 +346,8 @@ qpic_bam: dma-controller@7984000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x0 0x07984000 0x0 0x1a000>;
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QPIC_CLK>,
- <&gcc GCC_QPIC_AHB_CLK>;
- clock-names = "iface_clk", "bam_clk";
+ clocks = <&gcc GCC_QPIC_AHB_CLK>;
+ clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
status = "disabled";
--
2.31.1
\
 
 \ /
  Last update: 2021-10-13 12:56    [W:0.289 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site