lkml.org 
[lkml]   [2021]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH net-next 4/6] net: dsa: tag_rtl8_4: add realtek 8 byte protocol 4 tag
Date
On 10/13/21 11:45 AM, DENG Qingfang wrote:
> On Tue, Oct 12, 2021 at 02:35:53PM +0200, Alvin Šipraga wrote:
>> +static struct sk_buff *rtl8_4_tag_rcv(struct sk_buff *skb,
>> + struct net_device *dev)
>> +{
>> + __be16 *tag;
>> + u16 etype;
>> + u8 proto;
>> + u8 port;
>> +
>> + if (unlikely(!pskb_may_pull(skb, RTL8_4_TAG_LEN)))
>> + return NULL;
>> +
>> + tag = dsa_etype_header_pos_rx(skb);
>> +
>> + /* Parse Realtek EtherType */
>> + etype = ntohs(tag[0]);
>> + if (unlikely(etype != ETH_P_REALTEK)) {
>> + dev_warn_ratelimited(&dev->dev,
>> + "non-realtek ethertype 0x%04x\n", etype);
>> + return NULL;
>> + }
>> +
>> + /* Parse Protocol */
>> + proto = ntohs(tag[1]) >> 8;
>> + if (unlikely(proto != RTL8_4_PROTOCOL_RTL8365MB)) {
>> + dev_warn_ratelimited(&dev->dev,
>> + "unknown realtek protocol 0x%02x\n",
>> + proto);
>> + return NULL;
>> + }
>> +
>> + /* Parse TX (switch->CPU) */
>> + port = ntohs(tag[3]) & 0xf; /* Port number is the LSB 4 bits */
>> + skb->dev = dsa_master_find_slave(dev, 0, port);
>> + if (!skb->dev) {
>> + dev_warn_ratelimited(&dev->dev,
>> + "could not find slave for port %d\n",
>> + port);
>> + return NULL;
>> + }
>> +
>> + /* Remove tag and recalculate checksum */
>> + skb_pull_rcsum(skb, RTL8_4_TAG_LEN);
>> +
>> + dsa_strip_etype_header(skb, RTL8_4_TAG_LEN);
>> +
>> + dsa_default_offload_fwd_mark(skb);
>
> This should not be set if the REASON is trapped to CPU.

Thanks, you're right. Although with the current state of the driver,
skb->offload_fwd_mark will never get set, because the bridge is not
offloaded onto the HW. But I will fix this up in v2.

>
>> +
>> + return skb;
>> +}

\
 
 \ /
  Last update: 2021-10-13 11:52    [W:0.073 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site