lkml.org 
[lkml]   [2021]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [Freedreno] [PATCH v4 00/24] drm/bridge: Make panel and bridge probe order consistent
On Wed, Oct 13, 2021 at 7:16 AM Maxime Ripard <maxime@cerno.tech> wrote:
>
> Hi Caleb,
>
> On Thu, Sep 30, 2021 at 09:20:52PM +0100, Caleb Connolly wrote:
> > Hi,
> >
> > On 30/09/2021 20:49, Amit Pundir wrote:
> > > On Thu, 30 Sept 2021 at 04:50, Rob Clark <robdclark@gmail.com> wrote:
> > > >
> > > > On Wed, Sep 29, 2021 at 2:51 PM John Stultz <john.stultz@linaro.org> wrote:
> > > > >
> > > > > On Wed, Sep 29, 2021 at 2:32 PM John Stultz <john.stultz@linaro.org> wrote:
> > > > > > On Wed, Sep 29, 2021 at 2:27 PM John Stultz <john.stultz@linaro.org> wrote:
> > > > > > > On Fri, Sep 10, 2021 at 3:12 AM Maxime Ripard <maxime@cerno.tech> wrote:
> > > > > > > > The best practice to avoid those issues is to register its functions only after
> > > > > > > > all its dependencies are live. We also shouldn't wait any longer than we should
> > > > > > > > to play nice with the other components that are waiting for us, so in our case
> > > > > > > > that would mean moving the DSI device registration to the bridge probe.
> > > > > > > >
> > > > > > > > I also had a look at all the DSI hosts, and it seems that exynos, kirin and msm
> > > > > > > > would be affected by this and wouldn't probe anymore after those changes.
> > > > > > > > Exynos and kirin seems to be simple enough for a mechanical change (that still
> > > > > > > > requires to be tested), but the changes in msm seemed to be far more important
> > > > > > > > and I wasn't confortable doing them.
> > > > > > >
> > > > > > >
> > > > > > > Hey Maxime,
> > > > > > > Sorry for taking so long to get to this, but now that plumbers is
> > > > > > > over I've had a chance to check it out on kirin
> > > > > > >
> > > > > > > Rob Clark pointed me to his branch with some fixups here:
> > > > > > > https://gitlab.freedesktop.org/robclark/msm/-/commits/for-mripard/bridge-rework
> > > > > > >
> > > > > > > But trying to boot hikey with that, I see the following loop indefinitely:
> > > > > > > [ 4.632132] adv7511 2-0039: supply avdd not found, using dummy regulator
> > > > > > > [ 4.638961] adv7511 2-0039: supply dvdd not found, using dummy regulator
> > > > > > > [ 4.645741] adv7511 2-0039: supply pvdd not found, using dummy regulator
> > > > > > > [ 4.652483] adv7511 2-0039: supply a2vdd not found, using dummy regulator
> > > > > > > [ 4.659342] adv7511 2-0039: supply v3p3 not found, using dummy regulator
> > > > > > > [ 4.666086] adv7511 2-0039: supply v1p2 not found, using dummy regulator
> > > > > > > [ 4.681898] adv7511 2-0039: failed to find dsi host
> > > > > >
> > > > > > I just realized Rob's tree is missing the kirin patch. My apologies!
> > > > > > I'll retest and let you know.
> > > > >
> > > > > Ok, just retested including the kirin patch and unfortunately I'm
> > > > > still seeing the same thing. :(
> > > > >
> > > > > Will dig a bit and let you know when I find more.
> > > >
> > > > Did you have a chance to test it on anything using drm/msm with DSI
> > > > panels? That would at least confirm that I didn't miss anything in
> > > > the drm/msm patch to swap the dsi-host vs bridge ordering..
> > >
> > > Hi, smoke tested
> > > https://gitlab.freedesktop.org/robclark/msm/-/commits/for-mripard/bridge-rework
> > > on Pocophone F1 (sdm845 / A630) with v5.15-rc3. I see no obvious
> > > regressions in my limited testing so far including video (youtube)
> > > playback.
> > Tested on the OnePlus 6 too booting AOSP, works fine. This *fixes*
> > FBDEV_EMULATION (so we can get a working framebuffer console) which was
> > otherwise broken on 5.15.
> >
> > However it spits out some warnings during boot: https://p.calebs.dev/gucysowyna.yaml
>
> Thanks for testing. It looks like the runtime_pm ordering between the
> msm devices changed a bit with the conversion Rob did.
>
> Rob, do you know what could be going on?
>

Not entirely sure.. I didn't see that first splat, but maybe I was
missing some debug config? (The 2nd one is kind of "normal", I think
related to bootloader leaving the display on)

BR,
-R

\
 
 \ /
  Last update: 2021-10-14 02:18    [W:0.077 / U:6.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site