lkml.org 
[lkml]   [2021]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 6/9] dt-bindings: imx6q-pcie: Add PHY phandles and name properties
Date
i.MX8MM PCIe has the PHY. Add a PHY phandle and name properties
in the binding document.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
index 2911e565b260..99d9863a69cd 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -128,6 +128,12 @@ properties:
enum: [1, 2, 3, 4]
default: 1

+ phys:
+ description: Phandle of the Generic PHY to the PCIe PHY.
+
+ phy-names:
+ const: pcie-phy
+
reset-gpio:
description: Should specify the GPIO for controlling the PCI bus device
reset signal. It's not polarity aware and defaults to active-low reset
--
2.25.1
\
 
 \ /
  Last update: 2021-10-12 11:07    [W:0.260 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site