lkml.org 
[lkml]   [2021]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/2] Fix the Xen HVM kdump/kexec boot panic issue
From
Date
On 12.10.21 09:24, Dongli Zhang wrote:
> When the kdump/kexec is enabled at HVM VM side, to panic kernel will trap
> to xen side with reason=soft_reset. As a result, the xen will reboot the VM
> with the kdump kernel.
>
> Unfortunately, when the VM is panic with below command line ...
>
> "taskset -c 33 echo c > /proc/sysrq-trigger"
>
> ... the kdump kernel is panic at early stage ...
>
> PANIC: early exception 0x0e IP 10:ffffffffa8c66876 error 0 cr2 0x20
> [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc5xen #1
> [ 0.000000] Hardware name: Xen HVM domU
> [ 0.000000] RIP: 0010:pvclock_clocksource_read+0x6/0xb0
> ... ...
> [ 0.000000] RSP: 0000:ffffffffaa203e20 EFLAGS: 00010082 ORIG_RAX: 0000000000000000
> [ 0.000000] RAX: 0000000000000003 RBX: 0000000000010000 RCX: 00000000ffffdfff
> [ 0.000000] RDX: 0000000000000003 RSI: 00000000ffffdfff RDI: 0000000000000020
> [ 0.000000] RBP: 0000000000011000 R08: 0000000000000000 R09: 0000000000000001
> [ 0.000000] R10: ffffffffaa203e00 R11: ffffffffaa203c70 R12: 0000000040000004
> [ 0.000000] R13: ffffffffaa203e5c R14: ffffffffaa203e58 R15: 0000000000000000
> [ 0.000000] FS: 0000000000000000(0000) GS:ffffffffaa95e000(0000) knlGS:0000000000000000
> [ 0.000000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 0.000000] CR2: 0000000000000020 CR3: 00000000ec9e0000 CR4: 00000000000406a0
> [ 0.000000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 0.000000] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [ 0.000000] Call Trace:
> [ 0.000000] ? xen_init_time_common+0x11/0x55
> [ 0.000000] ? xen_hvm_init_time_ops+0x23/0x45
> [ 0.000000] ? xen_hvm_guest_init+0x214/0x251
> [ 0.000000] ? 0xffffffffa8c00000
> [ 0.000000] ? setup_arch+0x440/0xbd6
> [ 0.000000] ? start_kernel+0x6a/0x689
> [ 0.000000] ? secondary_startup_64_no_verify+0xc2/0xcb
>
> This is because Xen HVM supports at most MAX_VIRT_CPUS=32 'vcpu_info'
> embedded inside 'shared_info' during early stage until xen_vcpu_setup() is
> used to allocate/relocate 'vcpu_info' for boot cpu at arbitrary address.
>
>
> The 1st patch is to fix the issue at VM kernel side. However, we may
> observe clock drift at VM side due to the issue at xen hypervisor side.
> This is because the pv vcpu_time_info is not updated when
> VCPUOP_register_vcpu_info.
>
> The 2nd patch is to force_update_vcpu_system_time() at xen side when
> VCPUOP_register_vcpu_info, to avoid the VM clock drift during kdump kernel
> boot.

Please don't mix patches for multiple projects in one series.

In cases like this it is fine to mention the other project's patch
verbally instead.


Juergen
[unhandled content-type:application/pgp-keys][unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2021-10-12 10:47    [W:0.128 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site