lkml.org 
[lkml]   [2021]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH net] can: j1939: j1939_xtp_rx_dat_one(): cancel session if receive TP.DT with error length
From
Date
On 2021/10/11 14:35, Oleksij Rempel wrote:
> On Sat, Oct 09, 2021 at 04:43:56PM +0800, Zhang Changzhong wrote:
>> On 2021/10/8 19:00, Oleksij Rempel wrote:
>>> On Fri, Oct 08, 2021 at 05:22:12PM +0800, Zhang Changzhong wrote:
>>>> Hi Kurt,
>>>> Sorry for the late reply.
>>>>
>>>> On 2021/9/30 15:42, Kurt Van Dijck wrote:
>>>>> On Thu, 30 Sep 2021 11:33:20 +0800, Zhang Changzhong wrote:
>>>>>> According to SAE-J1939-21, the data length of TP.DT must be 8 bytes, so
>>>>>> cancel session when receive unexpected TP.DT message.
>>>>>
>>>>> SAE-j1939-21 indeed says that all TP.DT must be 8 bytes.
>>>>> However, the last TP.DT may contain up to 6 stuff bytes, which have no meaning.
>>>>> If I remember well, they are even not 'reserved'.
>>>>
>>>> Agree, these bytes are meaningless for last TP.DT.
>>>>
>>>>>
>>>>>>
>>>>>> Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
>>>>>> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
>>>>>> ---
>>>>>> net/can/j1939/transport.c | 7 +++++--
>>>>>> 1 file changed, 5 insertions(+), 2 deletions(-)
>>>>>>
>>>>>> diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c
>>>>>> index bb5c4b8..eedaeaf 100644
>>>>>> --- a/net/can/j1939/transport.c
>>>>>> +++ b/net/can/j1939/transport.c
>>>>>> @@ -1789,6 +1789,7 @@ static void j1939_xtp_rx_dpo(struct j1939_priv *priv, struct sk_buff *skb,
>>>>>> static void j1939_xtp_rx_dat_one(struct j1939_session *session,
>>>>>> struct sk_buff *skb)
>>>>>> {
>>>>>> + enum j1939_xtp_abort abort = J1939_XTP_ABORT_FAULT;
>>>>>> struct j1939_priv *priv = session->priv;
>>>>>> struct j1939_sk_buff_cb *skcb, *se_skcb;
>>>>>> struct sk_buff *se_skb = NULL;
>>>>>> @@ -1803,9 +1804,11 @@ static void j1939_xtp_rx_dat_one(struct j1939_session *session,
>>>>>>
>>>>>> skcb = j1939_skb_to_cb(skb);
>>>>>> dat = skb->data;
>>>>>> - if (skb->len <= 1)
>>>>>> + if (skb->len != 8) {
>>>>>> /* makes no sense */
>>>>>> + abort = J1939_XTP_ABORT_UNEXPECTED_DATA;
>>>>>> goto out_session_cancel;
>>>>>
>>>>> I think this is a situation of
>>>>> "be strict on what you send, be tolerant on what you receive".
>>>>>
>>>>> Did you find a technical reason to abort a session because the last frame didn't
>>>>> bring overhead that you don't use?
>>>>
>>>> No technical reason. The only reason is that SAE-J1939-82 requires responder
>>>> to abort session if any TP.DT less than 8 bytes (section A.3.4, Row 7).
>>>
>>> Do you mean: "BAM Transport: Ensure DUT discards BAM transport when
>>> TP.DT data packets are not correct size" ... "Verify DUT discards the
>>> BAM transport if any TP.DT data packet has less than 8 bytes"?
>>
>> Yes.
>
> OK, then I have some problems to understand this part:
> - 5.10.2.4 Connection Closure
> The “connection abort” message is not allowed to be used by responders in the
> case of a global destination (i.e. BAM).
>
> My assumption would be: In case of broadcast transfer, multiple MCU are
> receivers. If one of MCU was not able to get complete TP.DT, it should
> not abort BAM for all.
>
> So, "DUT discards the BAM transport" sounds for me as local action.
> Complete TP would be dropped locally.

Yeah, you are right. With this patch receivers drop BAM transport locally
because j1939_session_cancel() only send abort message in RTS/CTS transport.

For RTS/CTS transport, SAE-J1939-82 also has similar requirements:
"RTS/CTS Transport: Data field size of Transport Data packets for RTS/CTS
(DUT as Responder)"..."Verify DUT behavior, e.g., sends a TP.CM_CTS to have
packets resent or sends a TP.Conn_Abort, when it receives TP.DT data packets
with less than 8 bytes" (section A.3.6, Row 18)

Regards,
Changzhong
.

\
 
 \ /
  Last update: 2021-10-11 12:40    [W:0.671 / U:0.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site