lkml.org 
[lkml]   [2021]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH v3 5/5] RISC-V: Add SBI HSM extension in KVM
Date
On Fri, 2021-10-08 at 15:02 +0000, Sean Christopherson wrote:
> On Thu, Oct 07, 2021, Atish Patra wrote:
> > SBI HSM extension allows OS to start/stop harts any time. It also
> > allows
> > diff --git a/arch/riscv/kvm/vcpu.c b/arch/riscv/kvm/vcpu.c
> > index c44cabce7dd8..278b4d643e1b 100644
> > --- a/arch/riscv/kvm/vcpu.c
> > +++ b/arch/riscv/kvm/vcpu.c
> > @@ -133,6 +133,13 @@ static void kvm_riscv_reset_vcpu(struct
> > kvm_vcpu *vcpu)
> >         struct kvm_vcpu_csr *reset_csr = &vcpu-
> > >arch.guest_reset_csr;
> >         struct kvm_cpu_context *cntx = &vcpu->arch.guest_context;
> >         struct kvm_cpu_context *reset_cntx = &vcpu-
> > >arch.guest_reset_context;
> > +       bool loaded;
> > +
> > +       /* Disable preemption to avoid race with preempt notifiers
> > */
>
> Stating what the code literally does is not a helpful comment, as it
> doesn't
> help the reader understand _why_ preemption needs to be disabled.


The preemption is disabled here because it races with
kvm_sched_out/kvm_sched_in(called from preempt notifiers) which also
calls vcpu_load/put.

I will add some more explanation in the comment to make it more
explicit.

>
> > +       preempt_disable();
> > +       loaded = (vcpu->cpu != -1);
> > +       if (loaded)
> > +               kvm_arch_vcpu_put(vcpu);
>
> Oof.  Looks like this pattern was taken from arm64. 

Yes. This part is similar to arm64 because the same race condition can
happen in riscv due to save/restore of CSRs during reset.


> Is there really no better
> approach to handling this?  I don't see anything in
> kvm_riscv_reset_vcpu() that
> will obviously break if the vCPU is loaded.  If the goal is purely to
> effect a
> CSR reset via kvm_arch_vcpu_load(), then why not just factor out a
> helper to do
> exactly that?
>
> >  
> >         memcpy(csr, reset_csr, sizeof(*csr));
> >  
> > @@ -144,6 +151,11 @@ static void kvm_riscv_reset_vcpu(struct
> > kvm_vcpu *vcpu)
> >  
> >         WRITE_ONCE(vcpu->arch.irqs_pending, 0);
> >         WRITE_ONCE(vcpu->arch.irqs_pending_mask, 0);
> > +
> > +       /* Reset the guest CSRs for hotplug usecase */
> > +       if (loaded)
> > +               kvm_arch_vcpu_load(vcpu, smp_processor_id());
>
> If the preempt shenanigans really have to stay, at least use
> get_cpu()/put_cpu().
>

Is there any specific advantage to that ? get_cpu/put_cpu are just
macros which calls preempt_disable/preempt_enable.

The only advantage of get_cpu is that it returns the current cpu.
vcpu_load function uses get_cpu because it requires the current cpu id.

However, we don't need that in this case. I am not against changing it
to get_cpu/put_cpu. Just wanted to understand the reasoning behind your
suggestion.


> > +       preempt_enable();
> >  }
> >  
> >  int kvm_arch_vcpu_precreate(struct kvm *kvm, unsigned int id)
> > @@ -180,6 +192,13 @@ int kvm_arch_vcpu_create(struct kvm_vcpu
> > *vcpu)
> >  
> >  void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
> >  {
> > +       /**
> > +        * vcpu with id 0 is the designated boot cpu.
> > +        * Keep all vcpus with non-zero cpu id in power-off state
> > so that they
> > +        * can brought to online using SBI HSM extension.
> > +        */
> > +       if (vcpu->vcpu_idx != 0)
> > +               kvm_riscv_vcpu_power_off(vcpu);
>
> Why do this in postcreate?
>

Because we need to absolutely sure that the vcpu is created. It is
cleaner in this way rather than doing this here at the end of
kvm_arch_vcpu_create. create_vcpu can also fail after
kvm_arch_vcpu_create returns.


> >  }
> >  
> >  void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
> > diff --git a/arch/riscv/kvm/vcpu_sbi.c b/arch/riscv/kvm/vcpu_sbi.c
> > index dadee5e61a46..db54ef21168b 100644
>
> ...
>
> > +static int kvm_sbi_hsm_vcpu_start(struct kvm_vcpu *vcpu)
> > +{
> > +       struct kvm_cpu_context *reset_cntx;
> > +       struct kvm_cpu_context *cp = &vcpu->arch.guest_context;
> > +       struct kvm_vcpu *target_vcpu;
> > +       unsigned long target_vcpuid = cp->a0;
> > +
> > +       target_vcpu = kvm_get_vcpu_by_id(vcpu->kvm, target_vcpuid);
> > +       if (!target_vcpu)
> > +               return -EINVAL;
> > +       if (!target_vcpu->arch.power_off)
> > +               return -EALREADY;
> > +
> > +       reset_cntx = &target_vcpu->arch.guest_reset_context;
> > +       /* start address */
> > +       reset_cntx->sepc = cp->a1;
> > +       /* target vcpu id to start */
> > +       reset_cntx->a0 = target_vcpuid;
> > +       /* private data passed from kernel */
> > +       reset_cntx->a1 = cp->a2;
> > +       kvm_make_request(KVM_REQ_VCPU_RESET, target_vcpu);
> > +
> > +       /* Make sure that the reset request is enqueued before
> > power on */
> > +       smp_wmb();
>
> What does this pair with?  I suspect nothing, because AFAICT the code
> was taken
> from arm64.
>

Thanks for noticing this. It was a slip up. I will fix it in next
revision.


> arm64 has the smp_wmb() in kvm_psci_vcpu_on() to ensure that the vCPU
> sees the
> request if the vCPU sees the change in vcpu->arch.power_off, and so
> has a
> smp_rmb() in kvm_reset_vcpu().
>
> Side topic, how much of arm64 and RISC-V is this similar?  Would it
> make sense
> to find some way for them to share code?

While some of the operational methodologies implemented in this patch
are similar with ARM64 (i.e. SBI HSM vs PSCI for cpu hotplug/booting),
the implementation is different in terms of CSR save/restore & pending
irq handling. We may end up in more code to as new arch hookups may
have to be added.

This option certainly can be explored in future. But it is not our TODO
list right now.


>
> > +       kvm_riscv_vcpu_power_on(target_vcpu);
> > +
> > +       return 0;
> > +}
> > +
> > +static int kvm_sbi_hsm_vcpu_stop(struct kvm_vcpu *vcpu)
> > +{
> > +       if ((!vcpu) || (vcpu->arch.power_off))
>
> Too many parentheses, and the NULL vCPU check is unnecessary.

ok. Will fix it.


>
> > +               return -EINVAL;
> > +
> > +       kvm_riscv_vcpu_power_off(vcpu);
> > +
> > +       return 0;
> > +}
> > +

--
Regards,
Atish
\
 
 \ /
  Last update: 2021-10-11 10:03    [W:0.288 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site