Messages in this thread | | | From | Rob Herring <> | Subject | Re: [PATCH v4 1/7] dt-bindings: iio: stm32-adc: add generic channel binding | Date | Mon, 11 Oct 2021 18:13:43 -0500 |
| |
On Mon, 11 Oct 2021 17:57:11 +0200, Olivier Moysan wrote: > Add ADC generic channel binding. This binding should > be used as an alternate to legacy channel properties > whenever possible. > ADC generic channel binding allows to identify supported > internal channels through the following reserved label names: > "vddcore", "vrefint" and "vbat". > This binding also allows to set a different sampling time > for each channel. > > Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> > Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> > --- > .../bindings/iio/adc/st,stm32-adc.yaml | 100 ++++++++++++++++-- > 1 file changed, 93 insertions(+), 7 deletions(-) >
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.example.dt.yaml: adc@48003000: adc@100:channel@13: 'st,min-sample-time-nsecs' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.example.dt.yaml: adc@48003000: adc@100:channel@14: 'st,min-sample-time-nsecs' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.example.dt.yaml: adc@48003000: adc@100:channel@15: 'st,min-sample-time-nsecs' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/1539385
This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:
pip3 install dtschema --upgrade
Please check and re-submit.
| |