lkml.org 
[lkml]   [2021]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[net-next PATCH v4 10/13] dt-bindings: net: dsa: qca8k: document open drain binding
Date
Document new binding qca,power_on_sel used to enable Power-on-strapping
select reg and qca,led_open_drain to set led to open drain mode.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
Documentation/devicetree/bindings/net/dsa/qca8k.txt | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
index 05a8ddfb5483..71cd45818430 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
@@ -13,6 +13,17 @@ Required properties:
Optional properties:

- reset-gpios: GPIO to be used to reset the whole device
+- qca,ignore-power-on-sel: Ignore power on pin strapping to configure led open
+ drain or eeprom presence. This is needed for broken
+ device that have wrong configuration or when the oem
+ decided to not use pin strapping and fallback to sw
+ regs.
+- qca,led-open-drain: Set leds to open-drain mode. This require the
+ qca,ignore-power-on-sel to be set or the driver will fail
+ to probe. This is needed if the oem doesn't use pin
+ strapping to set this mode and prefer to set it using sw
+ regs. The pin strapping related to led open drain mode is
+ the pin B68 for QCA832x and B49 for QCA833x

Subnodes:

--
2.32.0
\
 
 \ /
  Last update: 2021-10-10 13:17    [W:0.449 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site