Messages in this thread | | | From | Rob Herring <> | Subject | Re: [PATCH 1/7] dt-bindings: nfc: nxp,nci: convert to dtschema | Date | Sun, 10 Oct 2021 14:31:56 -0500 |
| |
On Sun, 10 Oct 2021 16:23:11 +0200, Krzysztof Kozlowski wrote: > Convert the NXP NCI NFC controller to DT schema format. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> > --- > .../devicetree/bindings/net/nfc/nxp,nci.yaml | 61 +++++++++++++++++++ > .../devicetree/bindings/net/nfc/nxp-nci.txt | 33 ---------- > MAINTAINERS | 1 + > 3 files changed, 62 insertions(+), 33 deletions(-) > create mode 100644 Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml > delete mode 100644 Documentation/devicetree/bindings/net/nfc/nxp-nci.txt >
Running 'make dtbs_check' with the schema in this patch gives the following warnings. Consider if they are expected or the schema is incorrect. These may not be new warnings.
Note that it is not yet a requirement to have 0 warnings for dtbs_check. This will change in the future.
Full log is available here: https://patchwork.ozlabs.org/patch/1539010
nfc@28: 'clock-frequency' is a required property arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
nfc@28: compatible:0: 'nxp,nxp-nci-i2c' was expected arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
nfc@28: compatible: Additional items are not allowed ('nxp,nxp-nci-i2c' was unexpected) arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
nfc@28: compatible: ['nxp,pn547', 'nxp,nxp-nci-i2c'] is too long arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
nfc@30: 'clock-frequency' is a required property arch/arm/boot/dts/ste-ux500-samsung-janice.dt.yaml
nfc@30: compatible:0: 'nxp,nxp-nci-i2c' was expected arch/arm/boot/dts/ste-ux500-samsung-janice.dt.yaml
nfc@30: compatible: Additional items are not allowed ('nxp,nxp-nci-i2c' was unexpected) arch/arm/boot/dts/ste-ux500-samsung-janice.dt.yaml
nfc@30: compatible: ['nxp,pn547', 'nxp,nxp-nci-i2c'] is too long arch/arm/boot/dts/ste-ux500-samsung-janice.dt.yaml
| |