lkml.org 
[lkml]   [2021]   [Oct]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [EXT] [PATCH v2 04/16] ARM: dts: ls1021a-qds: Add node for QSPI flash
On Fri, Oct 1, 2021 at 12:30 AM Kuldeep Singh <kuldeep.singh@nxp.com> wrote:
>
> Hi Leo,
>
> > -----Original Message-----
> > From: Li Yang <leoyang.li@nxp.com>
> > Sent: Friday, October 1, 2021 5:34 AM
> > To: Shawn Guo <shawnguo@kernel.org>; Rob Herring
> > <robh+dt@kernel.org>; devicetree@vger.kernel.org; Oleksij Rempel
> > <linux@rempel-privat.de>; linux-arm-kernel@lists.infradead.org; linux-
> > kernel@vger.kernel.org
> > Cc: Leo Li <leoyang.li@nxp.com>
> > Subject: [EXT] [PATCH v2 04/16] ARM: dts: ls1021a-qds: Add node for QSPI
> > flash
> >
> > Caution: EXT Email
> >
> > Add the missing node for qspi flash.
> >
> > Signed-off-by: Li Yang <leoyang.li@nxp.com>
> > ---
> > arch/arm/boot/dts/ls1021a-qds.dts | 15 +++++++++++++++
> > 1 file changed, 15 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/ls1021a-qds.dts
> > b/arch/arm/boot/dts/ls1021a-qds.dts
> > index e2aa569ff404..522e1dc51059 100644
> > --- a/arch/arm/boot/dts/ls1021a-qds.dts
> > +++ b/arch/arm/boot/dts/ls1021a-qds.dts
> > @@ -286,6 +286,21 @@ tbi0: tbi-phy@8 {
> > };
> > };
> >
> > +&qspi {
> > + num-cs = <2>;
>
> Please drop "num-cs" property as it is not used by qspi driver.
>
> > + status = "okay";
> > +
> > + qflash0: flash@0 {
>
> Can we have flash chip name instead of qflash?
> There is no hard requirement, it will help in aligning node properties with other board properties such as LX2160A-RDB, LS1046A-RDB etc.

Thanks for the review. I find that there is no reference to the label
at all. I don't know why we added it in the first place. Probably we
can just remove it?

>
> With above fixed,
> Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
>
> > + compatible = "jedec,spi-nor";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + spi-max-frequency = <20000000>;
> > + reg = <0>;
> > + spi-rx-bus-width = <4>;
> > + spi-tx-bus-width = <4>;
> > + };
> > +};
> > +
> > &sai2 {
> > status = "okay";
> > };
> > --
> > 2.25.1
>

\
 
 \ /
  Last update: 2021-10-01 22:09    [W:0.047 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site